Re: [DEBUG] mtd: spi-nor: dump DWORDs of the Basic Flash Parameter Table

From: Boris Brezillon
Date: Tue Sep 12 2017 - 09:12:53 EST


Hi Geert,

On Mon, 11 Sep 2017 10:58:36 +0200
Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:

> Hi Cyrille,
>
> On Thu, Sep 7, 2017 at 9:28 PM, Cyrille Pitchen
> <cyrille.pitchen@xxxxxxxxxx> wrote:
> >> Can you apply this patch on your tree then report me what was printed, please?
> >> I have an idea of the root cause of your issue then a potential work-around
> >> but I first need to validate my assumption to confirm that the work-around
> >> would actually work.
>
> +m25p80 spi0.0: DWORD1 = 0xffffffff
> +m25p80 spi0.0: DWORD2 = 0xffffffff
> +m25p80 spi0.0: DWORD3 = 0xffffffff
> +m25p80 spi0.0: DWORD4 = 0xffffffff
> +m25p80 spi0.0: DWORD5 = 0xffffffff
> +m25p80 spi0.0: DWORD6 = 0xffffffff
> +m25p80 spi0.0: DWORD7 = 0xffffffff
> +m25p80 spi0.0: DWORD8 = 0xffffffff
> +m25p80 spi0.0: DWORD9 = 0xffffffff
> +m25p80 spi0.0: DWORD10 = 0x00000000
> +m25p80 spi0.0: DWORD11 = 0x00000000
> +m25p80 spi0.0: DWORD12 = 0x00000000
> +m25p80 spi0.0: DWORD13 = 0x00000000
> +m25p80 spi0.0: DWORD14 = 0x00000000
> +m25p80 spi0.0: DWORD15 = 0x00000000
> +m25p80 spi0.0: DWORD16 = 0x00000000
> +m25p80 spi0.0: BFPT version 1.0 (length = 9)
>
> > If you could also dump the value of the 'addr' argument of
> > spi_nor_read_sfdp_dma_unsafe() just before the for () loop below in the
> > very same function. Actually, I suspect the SFDP tables of your SPI NOR
>
> +m25p80 spi0.0: addr = 0x448
>
> > memory sample to have been programmed with invalid values, neither
> > compliant with the JEDEC JESD216 specification nor with the Cypress
> > datasheet for this memory part.
>
> Sounds plausible.
> I get the same values when disabling DMA, so it's not due to bad DMA handling.
> All Renesas boards I have local or remote access to have spansion,s25fl512s.

Can you try with the following patch?

Thanks,

Boris

--->8---