[PATCH 2/5] staging: typec: tcpm: Document data structures

From: Guenter Roeck
Date: Sun Sep 10 2017 - 16:37:24 EST


Document struct tcpc_config and struct tcpc_dev.
Drop unused TCPC_USB_SWITCH_RESTORE.

Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/staging/typec/tcpm.h | 57 ++++++++++++++++++++++++++++++++++++++------
1 file changed, 50 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/typec/tcpm.h b/drivers/staging/typec/tcpm.h
index 7e9a6b7b5cd6..073197f0d2bb 100644
--- a/drivers/staging/typec/tcpm.h
+++ b/drivers/staging/typec/tcpm.h
@@ -54,6 +54,27 @@ enum tcpm_transmit_type {
TCPC_TX_BIST_MODE_2 = 7
};

+/**
+ * struct tcpc_config - Port configuration
+ * @src_pdo: PDO parameters sent to port partner as response to
+ * PD_CTRL_GET_SOURCE_CAP message
+ * @nr_src_pdo: Number of entries in @src_pdo
+ * @snk_pdo: PDO parameters sent to partner as response to
+ * PD_CTRL_GET_SINK_CAP message
+ * @nr_snk_pdo: Number of entries in @snk_pdo
+ * @max_snk_mv: Maximum acceptable sink voltage in mV
+ * @max_snk_ma: Maximum sink current in mA
+ * @max_snk_mw: Maximum required sink power in mW
+ * @operating_snk_mw:
+ * Required operating sink power in mW
+ * @type: Port type (TYPEC_PORT_DFP, TYPEC_PORT_UFP, or
+ * TYPEC_PORT_DRP)
+ * @default_role:
+ * Default port role (TYPEC_SINK or TYPEC_SOURCE).
+ * Set to TYPEC_NO_PREFERRED_ROLE if no default role.
+ * @try_role_hw:True if try.{Src,Snk} is implemented in hardware
+ * @alt_modes: List of supported alternate modes
+ */
struct tcpc_config {
const u32 *src_pdo;
unsigned int nr_src_pdo;
@@ -79,7 +100,6 @@ struct tcpc_config {
enum tcpc_usb_switch {
TCPC_USB_SWITCH_CONNECT,
TCPC_USB_SWITCH_DISCONNECT,
- TCPC_USB_SWITCH_RESTORE, /* TODO FIXME */
};

/* Mux state attributes */
@@ -104,17 +124,40 @@ struct tcpc_mux_dev {
void *priv_data;
};

+/**
+ * struct tcpc_dev - Port configuration and callback functions
+ * @config: Pointer to port configuration
+ * @get_vbus: Called to read current VBUS state
+ * @get_current_limit:
+ * Optional; called by the tcpm core when configured as a snk
+ * and cc=Rp-def. This allows the tcpm to provide a fallback
+ * current-limit detection method for the cc=Rp-def case.
+ * For example, some tcpcs may include BC1.2 charger detection
+ * and use that in this case.
+ * @set_cc: Called to set value of CC pins
+ * @get_cc: Called to read current CC pin values
+ * @set_polarity:
+ * Called to set polarity
+ * @set_vconn: Called to enable or disable VCONN
+ * @set_vbus: Called to enable or disable VBUS
+ * @set_current_limit:
+ * Optional; called to set current limit as negotiated
+ * with partner.
+ * @set_pd_rx: Called to enable or disable reception of PD messages
+ * @set_roles: Called to set power and data roles
+ * @start_drp_toggling:
+ * Optional; if supported by hardware, called to start DRP
+ * toggling. DRP toggling is stopped automatically if
+ * a connection is established.
+ * @try_role: Optional; called to set a preferred role
+ * @pd_transmit:Called to transmit PD message
+ * @mux: Pointer to multiplexer data
+ */
struct tcpc_dev {
const struct tcpc_config *config;

int (*init)(struct tcpc_dev *dev);
int (*get_vbus)(struct tcpc_dev *dev);
- /*
- * This optional callback gets called by the tcpm core when configured
- * as a snk and cc=Rp-def. This allows the tcpm to provide a fallback
- * current-limit detection method for the cc=Rp-def case. E.g. some
- * tcpcs may include BC1.2 charger detection and use that in this case.
- */
int (*get_current_limit)(struct tcpc_dev *dev);
int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc);
int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1,
--
2.7.4