Re: [PATCH net-next 3/3] net: phy: realtek: add RTL8201F phy-id and functions

[Florian Fainelli]

On 09/08/2017 06:02 AM, Kunihiko Hayashi wrote:
> From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
> 
> Add RTL8201F phy-id and the related functions to the driver.
> 
> The original patch is as follows:
> https://patchwork.kernel.org/patch/2538341/
> 
> Signed-off-by: Jongsung Kim <neidhard.kim@xxxxxxx>
> Signed-off-by: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
> ---
>  drivers/net/phy/realtek.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 9cbe645..d9974ce 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -29,10 +29,23 @@
>  #define RTL8211F_PAGE_SELECT	0x1f
>  #define RTL8211F_TX_DELAY	0x100
>  
> +#define RTL8201F_ISR		0x1e
> +#define RTL8201F_PAGE_SELECT	0x1f

We have a page select register define for the RTL8211F right above, so
surely we can make that a common definition?

> +#define RTL8201F_IER		0x13
> +
>  MODULE_DESCRIPTION("Realtek PHY driver");
>  MODULE_AUTHOR("Johnson Leung");
>  MODULE_LICENSE("GPL");
>  
> +static int rtl8201_ack_interrupt(struct phy_device *phydev)
> +{
> +	int err;
> +
> +	err = phy_read(phydev, RTL8201F_ISR);
> +
> +	return (err < 0) ? err : 0;
> +}
> +
>  static int rtl821x_ack_interrupt(struct phy_device *phydev)
>  {
>  	int err;
> @@ -54,6 +67,25 @@ static int rtl8211f_ack_interrupt(struct phy_device *phydev)
>  	return (err < 0) ? err : 0;
>  }
>  
> +static int rtl8201_config_intr(struct phy_device *phydev)
> +{
> +	int err;
> +
> +	/* switch to page 7 */
> +	phy_write(phydev, RTL8201F_PAGE_SELECT, 0x7);
> +
> +	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> +		err = phy_write(phydev, RTL8201F_IER,
> +				BIT(13) | BIT(12) | BIT(11));

Can you detail what bits 11, 12 and 13 do? Do they correspond to link,
duplex and pause changes by any chance?

> +	else
> +		err = phy_write(phydev, RTL8201F_IER, 0);
> +
> +	/* restore to default page 0 */
> +	phy_write(phydev, RTL8201F_PAGE_SELECT, 0x0);
> +
> +	return err;
> +}
> +

Other than that, LGTM:

Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>

>  static int rtl8211b_config_intr(struct phy_device *phydev)
>  {
>  	int err;
> @@ -129,6 +161,18 @@ static struct phy_driver realtek_drvs[] = {
>  		.config_aneg    = &genphy_config_aneg,
>  		.read_status    = &genphy_read_status,
>  	}, {
> +		.phy_id		= 0x001cc816,
> +		.name		= "RTL8201F 10/100Mbps Ethernet",
> +		.phy_id_mask	= 0x001fffff,
> +		.features	= PHY_BASIC_FEATURES,
> +		.flags		= PHY_HAS_INTERRUPT,
> +		.config_aneg	= &genphy_config_aneg,
> +		.read_status	= &genphy_read_status,
> +		.ack_interrupt	= &rtl8201_ack_interrupt,
> +		.config_intr	= &rtl8201_config_intr,
> +		.suspend	= genphy_suspend,
> +		.resume		= genphy_resume,
> +	}, {
>  		.phy_id		= 0x001cc912,
>  		.name		= "RTL8211B Gigabit Ethernet",
>  		.phy_id_mask	= 0x001fffff,
> @@ -181,6 +225,7 @@ static struct phy_driver realtek_drvs[] = {
>  module_phy_driver(realtek_drvs);
>  
>  static struct mdio_device_id __maybe_unused realtek_tbl[] = {
> +	{ 0x001cc816, 0x001fffff },
>  	{ 0x001cc912, 0x001fffff },
>  	{ 0x001cc914, 0x001fffff },
>  	{ 0x001cc915, 0x001fffff },
> 


-- 
Florian