Re: [PATCH] net: bonding: Fix transmit load balancing inbalance-alb mode if specified by sysfs

From: Kosuke Tatsukawa
Date: Fri Sep 08 2017 - 10:18:20 EST


Hi,

> On 08/09/17 13:10, Nikolay Aleksandrov wrote:
>> On 08/09/17 05:06, Kosuke Tatsukawa wrote:
>>> Hi,
>>>
>>>> On 7.09.2017 01:47, Kosuke Tatsukawa wrote:
>>>>> Commit cbf5ecb30560 ("net: bonding: Fix transmit load balancing in
>>>>> balance-alb mode") tried to fix transmit dynamic load balancing in
>>>>> balance-alb mode, which wasn't working after commit 8b426dc54cf4
>>>>> ("bonding: remove hardcoded value").
>>>>>
>>>>> It turned out that my previous patch only fixed the case when
>>>>> balance-alb was specified as bonding module parameter, and not when
>>>>> balance-alb mode was set using /sys/class/net/*/bonding/mode (the most
>>>>> common usage). In the latter case, tlb_dynamic_lb was set up according
>>>>> to the default mode of the bonding interface, which happens to be
>>>>> balance-rr.
>>>>>
>>>>> This additional patch addresses this issue by setting up tlb_dynamic_lb
>>>>> to 1 if "mode" is set to balance-alb through the sysfs interface.
>>>>>
>>>>> I didn't add code to change tlb_balance_lb back to the default value for
>>>>> other modes, because "mode" is usually set up only once during
>>>>> initialization, and it's not worthwhile to change the static variable
>>>>> bonding_defaults in bond_main.c to a global variable just for this
>>>>> purpose.
>>>>>
>>>>> Commit 8b426dc54cf4 also changes the value of tlb_dynamic_lb for
>>>>> balance-tlb mode if it is set up using the sysfs interface. I didn't
>>>>> change that behavior, because the value of tlb_balance_lb can be changed
>>>>> using the sysfs interface for balance-tlb, and I didn't like changing
>>>>> the default value back and forth for balance-tlb.
>>>>>
>>>>> As for balance-alb, /sys/class/net/*/bonding/tlb_balance_lb cannot be
>>>>> written to. However, I think balance-alb with tlb_dynamic_lb set to 0
>>>>> is not an intended usage, so there is little use making it writable at
>>>>> this moment.
>>>>>
>>>>> Fixes: 8b426dc54cf4 ("bonding: remove hardcoded value")
>>>>> Reported-by: Reinis Rozitis <r@xxxxxxx>
>>>>> Signed-off-by: Kosuke Tatsukawa <tatsu@xxxxxxxxxxxxx>
>>>>> Cc: stable@xxxxxxxxxxxxxxx # v4.12+
>>>>> ---
>>>>> drivers/net/bonding/bond_options.c | 3 +++
>>>>> 1 files changed, 3 insertions(+), 0 deletions(-)
>>>>>
>>>>
>>>> I don't believe this to be the right solution, hardcoding it like this
>>>> changes user-visible behaviour. The issue is that if someone configured
>>>> it to be 0 in tlb mode, suddenly it will become 1 and will silently
>>>> override their config if they switch the mode to alb. Also it robs users
>>>> from their choice.
>>>>
>>>> If you think this should be settable in ALB mode, then IMO you should
>>>> edit tlb_dynamic_lb option's unsuppmodes and allow it to be set in ALB.
>>>> That would also be consistent with how it's handled in TLB mode.
>>>
>>> No, I don't think tlb_dynamic_lb should be settable in balance-alb at
>>> this point. All the current commits regarding tlb_dynamic_lb are for
>>> balance-tlb mode, so I don't think balance-alb with tlb_dynamic_lb set
>>> to 0 is an intended usage.
>>>
>>>
>>>> Going back and looking at your previous fix I'd argue that it is also
>>>> wrong, you should've removed the mode check altogether to return the
>>>> original behaviour where the dynamic_lb is set to 1 (enabled) by
>>>> default and then ALB mode would've had it, of course that would've left
>>>> the case of setting it to 0 in TLB mode and switching to ALB, but that
>>>> is a different issue.
>>>
>>> Maybe balance-alb shouldn't be dependent on tlb_dynamic_lb.
>>> tlb_dynamic_lb is referenced in the following functions.
>>>
>>> + bond_do_alb_xmit() -- Used by both balance-tlb and balance-alb
>>> + bond_tlb_xmit() -- Only used by balance-tlb
>>> + bond_open() -- Used by both balance-tlb and balance-alb
>>> + bond_check_params() -- Used during module initialization
>>> + bond_fill_info() -- Used to get/set value
>>> + bond_option_tlb_dynamic_lb_set() -- Used to get/set value
>>> + bonding_show_tlb_dynamic_lb() -- Used to get/set value
>>> + bond_is_nondyn_tlb() -- Only referenced if balance-tlb mode
>>>
>>> The following untested patch adds code to make balance-alb work as if
>>> tlb_dynamic_lb==1 for the functions which affect balance-alb mode. It
>>> also reverts my previous patch.
>>>
>>> What do you think about this approach?
>>> ---
>>> Kosuke TATSUKAWA | 1st Platform Software Division
>>> | NEC Solution Innovators
>>> | tatsu@xxxxxxxxxxxxx
>>>
>>
>> Logically the approach looks good, that being said it adds unnecessary tests in
>> the fast path, why not just something like the patch below ? That only leaves the
>> problem if it is zeroed in TLB and switched to ALB mode, and that is a one line
>> fix to unsuppmodes just allow it to be set for that specific case. The below
>> returns the default behaviour before the commit in your Fixes tag.
>>
>>
>
> Actually I'm fine with your approach, too. It will fix this regardless of the
> value of tlb_dynamic_lb which sounds good to me for the price of a test in
> the fast path.

If you're concerned about the additional test in the fast path, how
about the patch below. I've added an arguemnt to bond_do_alb_xmit()
to handle both balance-tlb and balance-alb similary.

I'm not sure if this causes any problem if tlb_dynamic_lb is changed
while calling bond_do_alb_xmit() in balance-tlb mode.
---
Kosuke TATSUKAWA | 1st Platform Software Division
| NEC Solution Innovators
| tatsu@xxxxxxxxxxxxx

------------------------------------------------------------------------
drivers/net/bonding/bond_alb.c | 11 ++++++-----
drivers/net/bonding/bond_main.c | 5 +++--
2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index c02cc81..7710f20 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1317,7 +1317,7 @@ void bond_alb_deinitialize(struct bonding *bond)
}

static int bond_do_alb_xmit(struct sk_buff *skb, struct bonding *bond,
- struct slave *tx_slave)
+ struct slave *tx_slave, int tlb_dynamic_lb)
{
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
struct ethhdr *eth_data = eth_hdr(skb);
@@ -1325,7 +1325,7 @@ static int bond_do_alb_xmit(struct sk_buff *skb, struct bonding *bond,
if (!tx_slave) {
/* unbalanced or unassigned, send through primary */
tx_slave = rcu_dereference(bond->curr_active_slave);
- if (bond->params.tlb_dynamic_lb)
+ if (tlb_dynamic_lb)
bond_info->unbalanced_load += skb->len;
}

@@ -1339,7 +1339,7 @@ static int bond_do_alb_xmit(struct sk_buff *skb, struct bonding *bond,
goto out;
}

- if (tx_slave && bond->params.tlb_dynamic_lb) {
+ if (tx_slave && tlb_dynamic_lb) {
spin_lock(&bond->mode_lock);
__tlb_clear_slave(bond, tx_slave, 0);
spin_unlock(&bond->mode_lock);
@@ -1386,7 +1386,8 @@ int bond_tlb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
break;
}
}
- return bond_do_alb_xmit(skb, bond, tx_slave);
+ return bond_do_alb_xmit(skb, bond, tx_slave,
+ bond->params.tlb_dynamic_lb);
}

int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
@@ -1483,7 +1484,7 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
tx_slave = tlb_choose_channel(bond, hash_index, skb->len);
}

- return bond_do_alb_xmit(skb, bond, tx_slave);
+ return bond_do_alb_xmit(skb, bond, tx_slave, 1);
}

void bond_alb_monitor(struct work_struct *work)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index fc63992..bcb71e7 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3305,7 +3305,8 @@ static int bond_open(struct net_device *bond_dev)
*/
if (bond_alb_initialize(bond, (BOND_MODE(bond) == BOND_MODE_ALB)))
return -ENOMEM;
- if (bond->params.tlb_dynamic_lb)
+ if (bond->params.tlb_dynamic_lb ||
+ (BOND_MODE(bond) == BOND_MODE_TLB))
queue_delayed_work(bond->wq, &bond->alb_work, 0);
}

@@ -4601,7 +4602,7 @@ static int bond_check_params(struct bond_params *params)
}
ad_user_port_key = valptr->value;

- if ((bond_mode == BOND_MODE_TLB) || (bond_mode == BOND_MODE_ALB)) {
+ if (bond_mode == BOND_MODE_TLB) {
bond_opt_initstr(&newval, "default");
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_TLB_DYNAMIC_LB),
&newval);