[PATCH v2 09/16] mmc: meson-gx: fix dual data rate mode frequencies

From: Jerome Brunet
Date: Mon Aug 21 2017 - 12:05:52 EST


In DDR modes, meson mmc controller requires an input rate twice as fast
as the output rate

Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
Reviewed-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/mmc/host/meson-gx-mmc.c | 41 +++++++++++++++++++++++++++++------------
1 file changed, 29 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 2f45daa5d510..0d3416dae8cf 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -262,14 +262,29 @@ static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
mmc_get_dma_dir(data));
}

-static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
+static bool meson_mmc_timing_is_ddr(struct mmc_ios *ios)
+{
+ if (ios->timing == MMC_TIMING_MMC_DDR52 ||
+ ios->timing == MMC_TIMING_UHS_DDR50 ||
+ ios->timing == MMC_TIMING_MMC_HS400)
+ return true;
+
+ return false;
+}
+
+static int meson_mmc_clk_set(struct meson_host *host, struct mmc_ios *ios)
{
struct mmc_host *mmc = host->mmc;
+ unsigned long rate = ios->clock;
int ret;
u32 cfg;

+ /* DDR modes require higher module clock */
+ if (meson_mmc_timing_is_ddr(ios))
+ rate <<= 1;
+
/* Same request - bail-out */
- if (host->req_rate == clk_rate)
+ if (host->req_rate == rate)
return 0;

/* stop clock */
@@ -278,25 +293,29 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
writel(cfg, host->regs + SD_EMMC_CFG);
host->req_rate = 0;

- if (!clk_rate) {
+ if (!rate) {
mmc->actual_clock = 0;
/* return with clock being stopped */
return 0;
}

- ret = clk_set_rate(host->mmc_clk, clk_rate);
+ ret = clk_set_rate(host->mmc_clk, rate);
if (ret) {
dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
- clk_rate, ret);
+ rate, ret);
return ret;
}

- host->req_rate = clk_rate;
+ host->req_rate = rate;
mmc->actual_clock = clk_get_rate(host->mmc_clk);

+ /* We should report the real output frequency of the controller */
+ if (meson_mmc_timing_is_ddr(ios))
+ mmc->actual_clock >>= 1;
+
dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
- if (clk_rate != mmc->actual_clock)
- dev_dbg(host->dev, "requested rate was %lu\n", clk_rate);
+ if (ios->clock != mmc->actual_clock)
+ dev_dbg(host->dev, "requested rate was %u\n", ios->clock);

/* (re)start clock */
cfg = readl(host->regs + SD_EMMC_CFG);
@@ -490,16 +509,14 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);

val &= ~CFG_DDR;
- if (ios->timing == MMC_TIMING_UHS_DDR50 ||
- ios->timing == MMC_TIMING_MMC_DDR52 ||
- ios->timing == MMC_TIMING_MMC_HS400)
+ if (meson_mmc_timing_is_ddr(ios))
val |= CFG_DDR;

val &= ~CFG_CHK_DS;
if (ios->timing == MMC_TIMING_MMC_HS400)
val |= CFG_CHK_DS;

- err = meson_mmc_clk_set(host, ios->clock);
+ err = meson_mmc_clk_set(host, ios);
if (err)
dev_err(host->dev, "Failed to set clock: %d\n,", err);

--
2.9.5