[Patch v2 03/19] CIFS: SMBD: Implement SMBDirect

From: Long Li
Date: Sun Aug 20 2017 - 15:10:59 EST


From: Long Li <longli@xxxxxxxxxxxxx>

Add code to implement SMBDirect transport and protocol.

1. Add APIs in header file. Upper layer code uses transport through the APIs.
2. Define SMBDirect connection in the header file. A connection is based on a RC QP in RDMA.
3. The implementation doesn't maintain send buffers or send queue for transfering payload via RDMA send. There is no data copy in the transport on send.
4. On the receive path, the implementation maintains receive buffers and reassembly queue for transfering payload via RDMA recv. There is data copy in the transport on recv.
5. The implementation recognizes the RFC1002 header length use in the SMB upper layer payloads in CIFS. Because this length is mainly used for TCP and not applicable to RDMA, it is handled as a out-of-band information never sent over the wire, and the trasnport behaves like TCP to upper layer by processing and exposing the length correctly on data payloads.
6. SMBDirect protocol enforces credits on RDMA send or recv, credits are exchanged and mutually managed by SMB server and client.
7. Each connection defines a user-configuration rdma_readwrite_threshold. Upper layer payloads larger than rdma_readwrite_threshold are sent through RDMA read, and received via RDMA write. There are fixed number of registered memory regions per connection for doing RDMA read/write. There is no data copy in the transport on RDMA read/write.
8. There are choices between workqueue and softirq on RDMA notification calls on CQ completions. Benchmark shows no visible difference between those two. This implemention chooses workqueue IB_POLL_WORKQUEUE, this also avoids using spin_lock_irqsave (use spin_lock instead) throughout the code.

Signed-off-by: Long Li <longli@xxxxxxxxxxxxx>
---
fs/cifs/smbdirect.c | 2250 +++++++++++++++++++++++++++++++++++++++++++++++++++
fs/cifs/smbdirect.h | 280 +++++++
2 files changed, 2530 insertions(+)

diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c
index d785bc1..01bf418 100644
--- a/fs/cifs/smbdirect.c
+++ b/fs/cifs/smbdirect.c
@@ -17,6 +17,35 @@
#include "smbdirect.h"
#include "cifs_debug.h"

+static struct smbd_response *get_receive_buffer(
+ struct smbd_connection *info);
+static void put_receive_buffer(
+ struct smbd_connection *info,
+ struct smbd_response *response);
+static int allocate_receive_buffers(struct smbd_connection *info, int num_buf);
+static void destroy_receive_buffers(struct smbd_connection *info);
+
+static void enqueue_reassembly(
+ struct smbd_connection *info,
+ struct smbd_response *response, int data_length);
+static struct smbd_response *_get_first_reassembly(
+ struct smbd_connection *info);
+
+static int smbd_post_recv(
+ struct smbd_connection *info,
+ struct smbd_response *response);
+
+static int smbd_post_send_empty(struct smbd_connection *info);
+static int smbd_post_send_data(
+ struct smbd_connection *info,
+ struct kvec *iov, int n_vec, int remaining_data_length);
+static int smbd_post_send_page(struct smbd_connection *info,
+ struct page *page, unsigned long offset,
+ size_t size, int remaining_data_length);
+
+static void destroy_mr_list(struct smbd_connection *info);
+static int allocate_mr_list(struct smbd_connection *info);
+
/* SMBD version number */
#define SMBD_V1 0x0100

@@ -76,3 +105,2224 @@ static int max_frmr_depth = 2048;

/* If payload is less than this byte, use RDMA send/recv not read/write */
static int rdma_readwrite_threshold = 4096;
+
+/* Transport logging functions
+ * Logging are defined as classes. They can be OR'ed to define the actual
+ * logging level via module parameter smbd_logging_class
+ * e.g. cifs.smbd_logging_class=0x500 will log all log_rdma_recv() and
+ * log_rdma_event()
+ */
+#define LOG_CREDIT 0x1
+#define LOG_OUTGOING 0x2
+#define LOG_INCOMING 0x4
+#define LOG_RECEIVE_QUEUE 0x8
+#define LOG_REASSEMBLY_QUEUE 0x10
+#define LOG_READ 0x20
+#define LOG_WRITE 0x40
+#define LOG_RDMA_SEND 0x80
+#define LOG_RDMA_RECV 0x100
+#define LOG_KEEP_ALIVE 0x200
+#define LOG_RDMA_EVENT 0x400
+#define LOG_RDMA_MR 0X800
+
+static unsigned int smbd_logging_class = LOG_RDMA_MR;
+module_param(smbd_logging_class, uint, 0644);
+MODULE_PARM_DESC(smbd_logging_class,
+ "Logging class for SMBD transport 0x0 to 0xfff");
+
+#define log_rdma(class, fmt, args...) \
+do { \
+ if (class & smbd_logging_class) \
+ cifs_dbg(VFS, "%s:%d " fmt, __func__, __LINE__, ##args);\
+} while (0)
+
+#define log_rdma_credit(fmt, args...) log_rdma(LOG_CREDIT, fmt, ##args)
+#define log_outgoing(fmt, args...) log_rdma(LOG_OUTGOING, fmt, ##args)
+#define log_incoming(fmt, args...) log_rdma(LOG_INCOMING, fmt, ##args)
+#define log_receive_queue(fmt, args...) \
+ log_rdma(LOG_RECEIVE_QUEUE, fmt, ##args)
+#define log_reassembly_queue(fmt, args...) \
+ log_rdma(LOG_REASSEMBLY_QUEUE, fmt, ##args)
+#define log_read(fmt, args...) log_rdma(LOG_READ, fmt, ##args)
+#define log_write(fmt, args...) log_rdma(LOG_WRITE, fmt, ##args)
+#define log_rdma_send(fmt, args...) log_rdma(LOG_RDMA_SEND, fmt, ##args)
+#define log_rdma_recv(fmt, args...) log_rdma(LOG_RDMA_RECV, fmt, ##args)
+#define log_keep_alive(fmt, args...) log_rdma(LOG_KEEP_ALIVE, fmt, ##args)
+#define log_rdma_event(fmt, args...) log_rdma(LOG_RDMA_EVENT, fmt, ##args)
+#define log_rdma_mr(fmt, args...) log_rdma(LOG_RDMA_MR, fmt, ##args)
+
+#define log_transport_credit(info) \
+ log_rdma_credit("receive_credits %d receive_credit_target %d " \
+ "send_credits %d send_credit_target %d\n", \
+ atomic_read(&info->receive_credits), \
+ info->receive_credit_target, \
+ atomic_read(&info->send_credits), \
+ info->send_credit_target) \
+
+/*
+ * Destroy the transport and related RDMA and memory resources
+ * Need to go through all the pending counters and make sure on one is using
+ * the transport while it is destroyed
+ */
+static void smbd_destroy_rdma_work(struct work_struct *work)
+{
+ struct smbd_response *response;
+ struct smbd_connection *info =
+ container_of(work, struct smbd_connection, destroy_work);
+
+ log_rdma_event("cancelling all pending works\n");
+ cancel_delayed_work_sync(&info->idle_timer_work);
+ cancel_delayed_work_sync(&info->send_immediate_work);
+
+ ib_drain_qp(info->id->qp);
+ rdma_destroy_qp(info->id);
+
+ log_rdma_event("wait for all send or recv finish\n");
+ wait_event(info->wait_send_pending,
+ atomic_read(&info->send_pending) == 0);
+ wait_event(info->wait_send_payload_pending,
+ atomic_read(&info->send_payload_pending) == 0);
+ wait_event(info->wait_recv_pending,
+ atomic_read(&info->recv_pending) == 0);
+ wait_event(info->wait_read_pending,
+ atomic_read(&info->read_pending) == 0);
+ destroy_mr_list(info);
+
+ log_rdma_event("drain the reassembly queue\n");
+ do {
+ spin_lock(&info->reassembly_queue_lock);
+ response = _get_first_reassembly(info);
+ if (response) {
+ list_del(&response->list);
+ spin_unlock(&info->reassembly_queue_lock);
+ put_receive_buffer(info, response);
+ }
+ } while (response);
+ spin_unlock(&info->reassembly_queue_lock);
+ info->reassembly_data_length = 0;
+ wake_up_interruptible(&info->wait_reassembly_queue);
+
+ log_rdma_event("free receive buffers\n");
+ destroy_receive_buffers(info);
+
+ ib_free_cq(info->send_cq);
+ ib_free_cq(info->recv_cq);
+ ib_dealloc_pd(info->pd);
+ rdma_destroy_id(info->id);
+
+ /* free mempools */
+ mempool_destroy(info->request_mempool);
+ kmem_cache_destroy(info->request_cache);
+
+ mempool_destroy(info->response_mempool);
+ kmem_cache_destroy(info->response_cache);
+
+ info->transport_status = SMBD_DESTROYED;
+ wake_up_all(&info->wait_destroy);
+}
+
+static int smbd_process_disconnected(struct smbd_connection *info)
+{
+ schedule_work(&info->destroy_work);
+ return 0;
+}
+
+static void smbd_disconnect_rdma_work(struct work_struct *work)
+{
+ struct smbd_connection *info =
+ container_of(work, struct smbd_connection, disconnect_work);
+
+ if (info->transport_status == SMBD_CONNECTED) {
+ info->transport_status = SMBD_DISCONNECTING;
+ rdma_disconnect(info->id);
+ }
+}
+
+static void smbd_disconnect_rdma_connection(struct smbd_connection *info)
+{
+ schedule_work(&info->disconnect_work);
+}
+
+/* Upcall from RDMA CM */
+static int smbd_conn_upcall(
+ struct rdma_cm_id *id, struct rdma_cm_event *event)
+{
+ struct smbd_connection *info = id->context;
+
+ log_rdma_event("event=%d status=%d\n", event->event, event->status);
+
+ switch (event->event) {
+ case RDMA_CM_EVENT_ADDR_RESOLVED:
+ case RDMA_CM_EVENT_ROUTE_RESOLVED:
+ info->ri_rc = 0;
+ complete(&info->ri_done);
+ break;
+
+ case RDMA_CM_EVENT_ADDR_ERROR:
+ info->ri_rc = -EHOSTUNREACH;
+ complete(&info->ri_done);
+ break;
+
+ case RDMA_CM_EVENT_ROUTE_ERROR:
+ info->ri_rc = -ENETUNREACH;
+ complete(&info->ri_done);
+ break;
+
+ case RDMA_CM_EVENT_ESTABLISHED:
+ case RDMA_CM_EVENT_CONNECT_ERROR:
+ case RDMA_CM_EVENT_UNREACHABLE:
+ case RDMA_CM_EVENT_REJECTED:
+ case RDMA_CM_EVENT_DEVICE_REMOVAL:
+ log_rdma_event("connected event=%d\n", event->event);
+ info->connect_state = event->event;
+ info->transport_status = SMBD_CONNECTED;
+ wake_up_interruptible(&info->conn_wait);
+ break;
+
+ case RDMA_CM_EVENT_DISCONNECTED:
+ info->transport_status = SMBD_DISCONNECTED;
+ smbd_process_disconnected(info);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/* Upcall from RDMA QP */
+static void
+smbd_qp_async_error_upcall(struct ib_event *event, void *context)
+{
+ struct smbd_connection *info = context;
+
+ log_rdma_event("%s on device %s info %p\n",
+ ib_event_msg(event->event), event->device->name, info);
+
+ switch (event->event) {
+ case IB_EVENT_CQ_ERR:
+ case IB_EVENT_QP_FATAL:
+ smbd_disconnect_rdma_connection(info);
+
+ default:
+ break;
+ }
+}
+
+static inline void *smbd_request_payload(struct smbd_request *request)
+{
+ return (void *)request->packet;
+}
+
+static inline void *smbd_response_payload(struct smbd_response *response)
+{
+ return (void *)response->packet;
+}
+
+/* Called when a RDMA send is done */
+static void send_done(struct ib_cq *cq, struct ib_wc *wc)
+{
+ int i;
+ struct smbd_request *request =
+ container_of(wc->wr_cqe, struct smbd_request, cqe);
+
+ log_rdma_send("smbd_request %p completed wc->status=%d\n",
+ request, wc->status);
+
+ if (wc->status != IB_WC_SUCCESS || wc->opcode != IB_WC_SEND) {
+ log_rdma_send("wc->status=%d wc->opcode=%d\n",
+ wc->status, wc->opcode);
+ }
+
+ for (i = 0; i < request->num_sge; i++)
+ ib_dma_unmap_single(request->info->id->device,
+ request->sge[i].addr,
+ request->sge[i].length,
+ DMA_TO_DEVICE);
+
+ if (request->has_payload) {
+ if (atomic_dec_and_test(&request->info->send_payload_pending))
+ wake_up(&request->info->wait_send_payload_pending);
+ } else {
+ if (atomic_dec_and_test(&request->info->send_pending))
+ wake_up(&request->info->wait_send_pending);
+ }
+
+ mempool_free(request, request->info->request_mempool);
+}
+
+static void dump_smbd_negotiate_resp(struct smbd_negotiate_resp *resp)
+{
+ log_rdma_event("resp message min_version %u max_version %u "
+ "negotiated_version %u credits_requested %u "
+ "credits_granted %u status %u max_readwrite_size %u "
+ "preferred_send_size %u max_receive_size %u "
+ "max_fragmented_size %u\n",
+ resp->min_version, resp->max_version, resp->negotiated_version,
+ resp->credits_requested, resp->credits_granted, resp->status,
+ resp->max_readwrite_size, resp->preferred_send_size,
+ resp->max_receive_size, resp->max_fragmented_size);
+}
+
+/*
+ * Process a negotiation response message, according to [MS-SMBD]3.1.5.7
+ * response, packet_length: the negotiation response message
+ * return value: true if negotiation is a success, false if failed
+ */
+static bool process_negotiation_response(
+ struct smbd_response *response, int packet_length)
+{
+ struct smbd_connection *info = response->info;
+ struct smbd_negotiate_resp *packet = smbd_response_payload(response);
+
+ if (packet_length < sizeof(struct smbd_negotiate_resp)) {
+ log_rdma_event("error: packet_length=%d\n", packet_length);
+ return false;
+ }
+
+ if (le16_to_cpu(packet->negotiated_version) != SMBD_V1) {
+ log_rdma_event("error: negotiated_version=%x\n",
+ le16_to_cpu(packet->negotiated_version));
+ return false;
+ }
+ info->protocol = le16_to_cpu(packet->negotiated_version);
+
+ if (packet->credits_requested == 0) {
+ log_rdma_event("error: credits_requested==0\n");
+ return false;
+ }
+ info->receive_credit_target = le16_to_cpu(packet->credits_requested);
+
+ if (packet->credits_granted == 0) {
+ log_rdma_event("error: credits_granted==0\n");
+ return false;
+ }
+ atomic_set(&info->send_credits, le16_to_cpu(packet->credits_granted));
+
+ atomic_set(&info->receive_credits, 0);
+
+ if (le32_to_cpu(packet->preferred_send_size) > info->max_receive_size) {
+ log_rdma_event("error: preferred_send_size=%d\n",
+ le32_to_cpu(packet->preferred_send_size));
+ return false;
+ }
+ info->max_receive_size = le32_to_cpu(packet->preferred_send_size);
+
+ if (le32_to_cpu(packet->max_receive_size) < SMBD_MIN_RECEIVE_SIZE) {
+ log_rdma_event("error: max_receive_size=%d\n",
+ le32_to_cpu(packet->max_receive_size));
+ return false;
+ }
+ info->max_send_size = min_t(int, info->max_send_size,
+ le32_to_cpu(packet->max_receive_size));
+
+ if (le32_to_cpu(packet->max_fragmented_size) <
+ SMBD_MIN_FRAGMENTED_SIZE) {
+ log_rdma_event("error: max_fragmented_size=%d\n",
+ le32_to_cpu(packet->max_fragmented_size));
+ return false;
+ }
+ info->max_fragmented_send_size =
+ le32_to_cpu(packet->max_fragmented_size);
+ info->rdma_readwrite_threshold =
+ rdma_readwrite_threshold > info->max_fragmented_send_size ?
+ info->max_fragmented_send_size :
+ rdma_readwrite_threshold;
+
+
+ info->max_readwrite_size = min_t(u32,
+ le32_to_cpu(packet->max_readwrite_size),
+ info->max_frmr_depth * PAGE_SIZE);
+ info->max_frmr_depth = info->max_readwrite_size / PAGE_SIZE;
+
+ return true;
+}
+
+/*
+ * Check and schedule to send an immediate packet
+ * This is used to extend credtis to remote peer to keep the transport busy
+ */
+static void check_and_send_immediate(struct smbd_connection *info)
+{
+ if (info->transport_status != SMBD_CONNECTED)
+ return;
+
+ info->send_immediate = true;
+
+ /*
+ * Promptly send a packet if our peer is running low on receive
+ * credits
+ */
+ if (atomic_read(&info->receive_credits) <
+ info->receive_credit_target - 1)
+ queue_delayed_work(
+ info->workqueue, &info->send_immediate_work, 0);
+}
+
+/* Called from softirq, when recv is done */
+static void recv_done(struct ib_cq *cq, struct ib_wc *wc)
+{
+ struct smbd_data_transfer *data_transfer;
+ struct smbd_response *response =
+ container_of(wc->wr_cqe, struct smbd_response, cqe);
+ struct smbd_connection *info = response->info;
+
+ log_rdma_recv("response=%p type=%d wc status=%d wc opcode %d "
+ "byte_len=%d pkey_index=%x\n",
+ response, response->type, wc->status, wc->opcode,
+ wc->byte_len, wc->pkey_index);
+
+ if (wc->status != IB_WC_SUCCESS || wc->opcode != IB_WC_RECV) {
+ log_rdma_recv("wc->status=%d opcode=%d\n",
+ wc->status, wc->opcode);
+ goto error;
+ }
+
+ ib_dma_sync_single_for_cpu(
+ wc->qp->device,
+ response->sge.addr,
+ response->sge.length,
+ DMA_FROM_DEVICE);
+
+ switch (response->type) {
+ /* SMBD negotiation response */
+ case SMBD_NEGOTIATE_RESP:
+ dump_smbd_negotiate_resp(smbd_response_payload(response));
+ info->full_packet_received = true;
+ info->negotiate_done =
+ process_negotiation_response(response, wc->byte_len);
+ complete(&info->negotiate_completion);
+ break;
+
+ /* SMBD data transfer packet */
+ case SMBD_TRANSFER_DATA:
+ data_transfer = smbd_response_payload(response);
+ atomic_dec(&info->receive_credits);
+ info->receive_credit_target =
+ le16_to_cpu(data_transfer->credits_requested);
+ atomic_add(le16_to_cpu(data_transfer->credits_granted),
+ &info->send_credits);
+
+ log_incoming("data flags %d data_offset %d data_length %d "
+ "remaining_data_length %d\n",
+ le16_to_cpu(data_transfer->flags),
+ le32_to_cpu(data_transfer->data_offset),
+ le32_to_cpu(data_transfer->data_length),
+ le32_to_cpu(data_transfer->remaining_data_length));
+
+ log_transport_credit(info);
+
+ /*
+ * We may have new send credits granted from remote peer
+ * If any sender is blcoked on lack of credets, unblock it
+ */
+ if (atomic_read(&info->send_credits))
+ wake_up_interruptible(&info->wait_send_queue);
+
+ /* Send a KEEP_ALIVE response right away if requested */
+ info->keep_alive_requested = KEEP_ALIVE_NONE;
+ if (le16_to_cpu(data_transfer->flags) &
+ le16_to_cpu(SMB_DIRECT_RESPONSE_REQUESTED)) {
+ info->keep_alive_requested = KEEP_ALIVE_PENDING;
+ }
+
+ /*
+ * Check if we need to send something to remote peer to
+ * grant more credits or respond to KEEP_ALIVE packet
+ */
+ check_and_send_immediate(info);
+
+ /*
+ * If this is a packet with data playload place the data in
+ * reassembly queue and wake up the reading thread
+ */
+ if (le32_to_cpu(data_transfer->data_length)) {
+ if (info->full_packet_received)
+ response->first_segment = true;
+
+ if (le32_to_cpu(data_transfer->remaining_data_length))
+ info->full_packet_received = false;
+ else
+ info->full_packet_received = true;
+
+ enqueue_reassembly(
+ info,
+ response,
+ le32_to_cpu(data_transfer->data_length));
+
+ wake_up_interruptible(&info->wait_reassembly_queue);
+ goto queue_done;
+ }
+
+ /* This is an empty packet, finish it */
+ break;
+
+ default:
+ log_rdma_recv("unexpected response type=%d\n", response->type);
+ }
+
+error:
+ put_receive_buffer(info, response);
+
+queue_done:
+ if (atomic_dec_and_test(&info->recv_pending))
+ wake_up(&info->wait_recv_pending);
+}
+
+static struct rdma_cm_id *smbd_create_id(
+ struct smbd_connection *info,
+ struct sockaddr *dstaddr, int port)
+{
+ struct rdma_cm_id *id;
+ int rc;
+ __be16 *sport;
+
+ id = rdma_create_id(&init_net, smbd_conn_upcall, info,
+ RDMA_PS_TCP, IB_QPT_RC);
+ if (IS_ERR(id)) {
+ rc = PTR_ERR(id);
+ log_rdma_event("rdma_create_id() failed %i\n", rc);
+ return id;
+ }
+
+ if (dstaddr->sa_family == AF_INET6)
+ sport = &((struct sockaddr_in6 *)dstaddr)->sin6_port;
+ else
+ sport = &((struct sockaddr_in *)dstaddr)->sin_port;
+
+ *sport = htons(port);
+
+ init_completion(&info->ri_done);
+ info->ri_rc = -ETIMEDOUT;
+
+ rc = rdma_resolve_addr(id, NULL, (struct sockaddr *)dstaddr,
+ RDMA_RESOLVE_TIMEOUT);
+ if (rc) {
+ log_rdma_event("rdma_resolve_addr() failed %i\n", rc);
+ goto out;
+ }
+ wait_for_completion_interruptible_timeout(
+ &info->ri_done, msecs_to_jiffies(RDMA_RESOLVE_TIMEOUT));
+ rc = info->ri_rc;
+ if (rc) {
+ log_rdma_event("rdma_resolve_addr() completed %i\n", rc);
+ goto out;
+ }
+
+ info->ri_rc = -ETIMEDOUT;
+ rc = rdma_resolve_route(id, RDMA_RESOLVE_TIMEOUT);
+ if (rc) {
+ log_rdma_event("rdma_resolve_route() failed %i\n", rc);
+ goto out;
+ }
+ wait_for_completion_interruptible_timeout(
+ &info->ri_done, msecs_to_jiffies(RDMA_RESOLVE_TIMEOUT));
+ rc = info->ri_rc;
+ if (rc) {
+ log_rdma_event("rdma_resolve_route() completed %i\n", rc);
+ goto out;
+ }
+
+ return id;
+
+out:
+ rdma_destroy_id(id);
+ return ERR_PTR(rc);
+}
+
+/*
+ * Test if FRWR (Fast Registration Work Requests) is supported on the device
+ * This implementation requries FRWR on RDMA read/write
+ * return value: true if it is supported
+ */
+static bool frwr_is_supported(struct ib_device_attr *attrs)
+{
+ if (!(attrs->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS))
+ return false;
+ if (attrs->max_fast_reg_page_list_len == 0)
+ return false;
+ return true;
+}
+
+static int smbd_ia_open(
+ struct smbd_connection *info,
+ struct sockaddr *dstaddr, int port)
+{
+ int rc;
+
+ info->id = smbd_create_id(info, dstaddr, port);
+ if (IS_ERR(info->id)) {
+ rc = PTR_ERR(info->id);
+ goto out1;
+ }
+
+ if (!frwr_is_supported(&info->id->device->attrs)) {
+ log_rdma_event(
+ "Fast Registration Work Requests "
+ "(FRWR) is not supported\n");
+ log_rdma_event(
+ "Device capability flags = %llx "
+ "max_fast_reg_page_list_len = %u\n",
+ info->id->device->attrs.device_cap_flags,
+ info->id->device->attrs.max_fast_reg_page_list_len);
+ rc = -EPROTONOSUPPORT;
+ goto out2;
+ }
+ info->max_frmr_depth = min_t(int,
+ max_frmr_depth,
+ info->id->device->attrs.max_fast_reg_page_list_len);
+ info->mr_type = IB_MR_TYPE_MEM_REG;
+ if (info->id->device->attrs.device_cap_flags & IB_DEVICE_SG_GAPS_REG)
+ info->mr_type = IB_MR_TYPE_SG_GAPS;
+
+ info->pd = ib_alloc_pd(info->id->device, 0);
+ if (IS_ERR(info->pd)) {
+ rc = PTR_ERR(info->pd);
+ log_rdma_event("ib_alloc_pd() returned %d\n", rc);
+ goto out2;
+ }
+
+ return 0;
+
+out2:
+ rdma_destroy_id(info->id);
+ info->id = NULL;
+
+out1:
+ return rc;
+}
+
+/*
+ * Send a negotiation request message to the peer
+ * The negotiation procedure is in [MS-SMBD] 3.1.5.2 and 3.1.5.3
+ * After negotiation, the transport is connected and ready for
+ * carrying upper layer SMB payload
+ */
+static int smbd_post_send_negotiate_req(struct smbd_connection *info)
+{
+ struct ib_send_wr send_wr, *send_wr_fail;
+ int rc = -ENOMEM;
+ struct smbd_request *request;
+ struct smbd_negotiate_req *packet;
+
+ request = mempool_alloc(info->request_mempool, GFP_KERNEL);
+ if (!request)
+ return rc;
+
+ request->info = info;
+
+ packet = smbd_request_payload(request);
+ packet->min_version = cpu_to_le16(SMBD_V1);
+ packet->max_version = cpu_to_le16(SMBD_V1);
+ packet->reserved = 0;
+ packet->credits_requested = cpu_to_le16(info->send_credit_target);
+ packet->preferred_send_size = cpu_to_le32(info->max_send_size);
+ packet->max_receive_size = cpu_to_le32(info->max_receive_size);
+ packet->max_fragmented_size =
+ cpu_to_le32(info->max_fragmented_recv_size);
+
+ request->num_sge = 1;
+ request->sge[0].addr = ib_dma_map_single(
+ info->id->device, (void *)packet,
+ sizeof(*packet), DMA_TO_DEVICE);
+ if (ib_dma_mapping_error(info->id->device, request->sge[0].addr)) {
+ rc = -EIO;
+ goto dma_mapping_failed;
+ }
+
+ request->sge[0].length = sizeof(*packet);
+ request->sge[0].lkey = info->pd->local_dma_lkey;
+
+ ib_dma_sync_single_for_device(
+ info->id->device, request->sge[0].addr,
+ request->sge[0].length, DMA_TO_DEVICE);
+
+ request->cqe.done = send_done;
+
+ send_wr.next = NULL;
+ send_wr.wr_cqe = &request->cqe;
+ send_wr.sg_list = request->sge;
+ send_wr.num_sge = request->num_sge;
+ send_wr.opcode = IB_WR_SEND;
+ send_wr.send_flags = IB_SEND_SIGNALED;
+
+ log_rdma_send("sge addr=%llx length=%x lkey=%x\n",
+ request->sge[0].addr,
+ request->sge[0].length, request->sge[0].lkey);
+
+ request->has_payload = false;
+ atomic_inc(&info->send_pending);
+ rc = ib_post_send(info->id->qp, &send_wr, &send_wr_fail);
+ if (!rc)
+ return 0;
+
+ /* if we reach here, post send failed */
+ log_rdma_send("ib_post_send failed rc=%d\n", rc);
+ atomic_dec(&info->send_pending);
+ ib_dma_unmap_single(info->id->device, request->sge[0].addr,
+ request->sge[0].length, DMA_TO_DEVICE);
+
+dma_mapping_failed:
+ mempool_free(request, info->request_mempool);
+ return rc;
+}
+
+/*
+ * Extend the credits to remote peer
+ * This implements [MS-SMBD] 3.1.5.9
+ * The idea is that we should extend credits to remote peer as quickly as
+ * it's allowed, to maintain data flow. We allocate as much receive
+ * buffer as possible, and extend the receive credits to remote peer
+ * return value: the new credtis being granted.
+ */
+static int manage_credits_prior_sending(struct smbd_connection *info)
+{
+ int ret = 0;
+ struct smbd_response *response;
+ int rc;
+
+ if (info->receive_credit_target > atomic_read(&info->receive_credits)) {
+ while (true) {
+ response = get_receive_buffer(info);
+ if (!response)
+ break;
+
+ response->type = SMBD_TRANSFER_DATA;
+ response->first_segment = false;
+ rc = smbd_post_recv(info, response);
+ if (rc) {
+ log_rdma_recv("post_recv failed rc=%d\n", rc);
+ put_receive_buffer(info, response);
+ break;
+ }
+
+ ret++;
+ }
+ }
+
+ atomic_add(ret, &info->receive_credits);
+ log_transport_credit(info);
+
+ if (ret)
+ info->send_immediate = false;
+
+ return ret;
+}
+
+/*
+ * Check if we need to send a KEEP_ALIVE message
+ * The idle connection timer triggers a KEEP_ALIVE message when expires
+ * SMB_DIRECT_RESPONSE_REQUESTED is set in the message flag to have peer send
+ * back a response.
+ * return value:
+ * 1 if SMB_DIRECT_RESPONSE_REQUESTED needs to be set
+ * 0: otherwise
+ */
+static int manage_keep_alive_before_sending(struct smbd_connection *info)
+{
+ if (info->keep_alive_requested == KEEP_ALIVE_PENDING) {
+ info->keep_alive_requested = KEEP_ALIVE_SENT;
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Build and prepare the SMBD packet header
+ * This function waits for avaialbe send credits and build a SMBD packet
+ * header. The caller then optional append payload to the packet after
+ * the header
+ * intput values
+ * size: the size of the payload
+ * remaining_data_length: remaining data to send if this is part of a
+ * fragmented packet
+ * output values
+ * request_out: the request allocated from this function
+ * return values: 0 on success, otherwise actual error code returned
+ */
+static int smbd_create_header(struct smbd_connection *info,
+ int size, int remaining_data_length,
+ struct smbd_request **request_out)
+{
+ struct smbd_request *request;
+ struct smbd_data_transfer *packet;
+ int header_length;
+ int rc;
+
+ if (info->transport_status != SMBD_CONNECTED) {
+ log_outgoing("disconnected not sending\n");
+ return -ENOENT;
+ }
+
+ /* Wait for send credits. A SMBD packet needs one credit */
+ rc = wait_event_interruptible(info->wait_send_queue,
+ atomic_read(&info->send_credits) > 0);
+ if (rc)
+ return rc;
+ atomic_dec(&info->send_credits);
+
+ request = mempool_alloc(info->request_mempool, GFP_KERNEL);
+ if (!request) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ request->info = info;
+
+ /* Fill in the packet header */
+ packet = smbd_request_payload(request);
+ packet->credits_requested = cpu_to_le16(info->send_credit_target);
+ packet->credits_granted =
+ cpu_to_le16(manage_credits_prior_sending(info));
+
+ packet->flags = 0;
+ if (manage_keep_alive_before_sending(info))
+ packet->flags |= cpu_to_le16(SMB_DIRECT_RESPONSE_REQUESTED);
+
+ packet->reserved = 0;
+ if (!size)
+ packet->data_offset = 0;
+ else
+ packet->data_offset = cpu_to_le32(24);
+ packet->data_length = cpu_to_le32(size);
+ packet->remaining_data_length = cpu_to_le32(remaining_data_length);
+ packet->padding = 0;
+
+ log_outgoing("credits_requested=%d credits_granted=%d data_offset=%d "
+ "data_length=%d remaining_data_length=%d\n",
+ le16_to_cpu(packet->credits_requested),
+ le16_to_cpu(packet->credits_granted),
+ le32_to_cpu(packet->data_offset),
+ le32_to_cpu(packet->data_length),
+ le32_to_cpu(packet->remaining_data_length));
+
+ /* Map the packet to DMA */
+ header_length = sizeof(struct smbd_data_transfer);
+ /* If this is a packet without payload, don't send padding */
+ if (!size)
+ header_length = offsetof(struct smbd_data_transfer, padding);
+
+ request->num_sge = 1;
+ request->sge[0].addr = ib_dma_map_single(info->id->device,
+ (void *)packet,
+ header_length,
+ DMA_BIDIRECTIONAL);
+ if (ib_dma_mapping_error(info->id->device, request->sge[0].addr)) {
+ mempool_free(request, info->request_mempool);
+ rc = -EIO;
+ goto err;
+ }
+
+ request->sge[0].length = header_length;
+ request->sge[0].lkey = info->pd->local_dma_lkey;
+
+ *request_out = request;
+ return 0;
+
+err:
+ atomic_inc(&info->send_credits);
+ return rc;
+}
+
+static void smbd_destroy_header(struct smbd_connection *info,
+ struct smbd_request *request)
+{
+
+ ib_dma_unmap_single(info->id->device,
+ request->sge[0].addr,
+ request->sge[0].length,
+ DMA_TO_DEVICE);
+ mempool_free(request, info->request_mempool);
+ atomic_inc(&info->send_credits);
+}
+
+/* Post the send request */
+static int smbd_post_send(struct smbd_connection *info,
+ struct smbd_request *request, bool has_payload)
+{
+ struct ib_send_wr send_wr, *send_wr_fail;
+ int rc, i;
+
+ for (i = 0; i < request->num_sge; i++) {
+ log_rdma_send("rdma_request sge[%d] addr=%llu legnth=%u\n",
+ i, request->sge[0].addr, request->sge[0].length);
+ ib_dma_sync_single_for_device(
+ info->id->device,
+ request->sge[i].addr,
+ request->sge[i].length,
+ DMA_TO_DEVICE);
+ }
+
+ request->cqe.done = send_done;
+
+ send_wr.next = NULL;
+ send_wr.wr_cqe = &request->cqe;
+ send_wr.sg_list = request->sge;
+ send_wr.num_sge = request->num_sge;
+ send_wr.opcode = IB_WR_SEND;
+ send_wr.send_flags = IB_SEND_SIGNALED;
+
+ if (has_payload) {
+ request->has_payload = true;
+ atomic_inc(&info->send_payload_pending);
+ } else {
+ request->has_payload = false;
+ atomic_inc(&info->send_pending);
+ }
+
+ rc = ib_post_send(info->id->qp, &send_wr, &send_wr_fail);
+ if (rc) {
+ log_rdma_send("ib_post_send failed rc=%d\n", rc);
+ if (has_payload) {
+ if (atomic_dec_and_test(&info->send_payload_pending))
+ wake_up(&info->wait_send_payload_pending);
+ } else {
+ if (atomic_dec_and_test(&info->send_pending))
+ wake_up(&info->wait_send_pending);
+ }
+ } else
+ /* Reset timer for idle connection after packet is sent */
+ mod_delayed_work(info->workqueue, &info->idle_timer_work,
+ info->keep_alive_interval*HZ);
+
+ return rc;
+}
+
+/*
+ * Send a page
+ * page: the page to send
+ * offset: offset in the page to send
+ * size: length in the page to send
+ * remaining_data_length: remaining data to send in this payload
+ */
+static int smbd_post_send_page(struct smbd_connection *info, struct page *page,
+ unsigned long offset, size_t size, int remaining_data_length)
+{
+ struct smbd_request *request;
+ int rc;
+
+ rc = smbd_create_header(info, size, remaining_data_length, &request);
+ if (rc)
+ return rc;
+
+ /* Add payload to packet */
+ request->num_sge++;
+ request->sge[1].addr = ib_dma_map_page(info->id->device, page,
+ offset, size, DMA_BIDIRECTIONAL);
+ if (ib_dma_mapping_error(info->id->device, request->sge[1].addr)) {
+ smbd_destroy_header(info, request);
+ return -EIO;
+ }
+ request->sge[1].length = size;
+ request->sge[1].lkey = info->pd->local_dma_lkey;
+
+ rc = smbd_post_send(info, request, true);
+ if (rc) {
+ ib_dma_unmap_single(info->id->device,
+ request->sge[1].addr,
+ request->sge[1].length,
+ DMA_TO_DEVICE);
+ smbd_destroy_header(info, request);
+
+ }
+ return rc;
+}
+
+/*
+ * Send an empty message
+ * Empty message is used to extend credits to peer to for keep live
+ * while there is no upper layer payload to send at the time
+ */
+static int smbd_post_send_empty(struct smbd_connection *info)
+{
+ struct smbd_request *request;
+ int rc;
+
+ rc = smbd_create_header(info, 0, 0, &request);
+ if (rc)
+ return rc;
+
+ info->count_send_empty++;
+ rc = smbd_post_send(info, request, false);
+ if (rc)
+ smbd_destroy_header(info, request);
+
+ return rc;
+}
+
+/*
+ * Send a data buffer
+ * iov: the iov array describing the data buffers
+ * n_vec: number of iov array
+ * remaining_data_length: remaining data to send following this packet
+ * in segmented SMBD packet
+ */
+static int smbd_post_send_data(
+ struct smbd_connection *info, struct kvec *iov, int n_vec,
+ int remaining_data_length)
+{
+ struct smbd_request *request;
+ int rc, i;
+ u32 data_length = 0;
+
+ for (i = 0; i < n_vec; i++)
+ data_length += iov[i].iov_len;
+ rc = smbd_create_header(
+ info, data_length, remaining_data_length, &request);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < n_vec; i++) {
+ request->sge[i+1].addr =
+ ib_dma_map_single(info->id->device, iov[i].iov_base,
+ iov[i].iov_len, DMA_BIDIRECTIONAL);
+ if (ib_dma_mapping_error(
+ info->id->device, request->sge[i+1].addr)) {
+ rc = -EIO;
+ request->sge[i+1].addr = 0;
+ goto dma_mapping_failure;
+ }
+ request->sge[i+1].length = iov[i].iov_len;
+ request->sge[i+1].lkey = info->pd->local_dma_lkey;
+ request->num_sge++;
+ }
+
+ rc = smbd_post_send(info, request, true);
+ if (!rc)
+ return 0;
+
+dma_mapping_failure:
+ for (i = 1; i < request->num_sge; i++)
+ if (request->sge[i].addr)
+ ib_dma_unmap_single(info->id->device,
+ request->sge[i].addr,
+ request->sge[i].length,
+ DMA_TO_DEVICE);
+ smbd_destroy_header(info, request);
+ return rc;
+}
+
+/*
+ * Post a receive request to the transport
+ * The remote peer can only send data when a receive request is posted
+ * The interaction is controlled by send/receive credit system
+ */
+static int smbd_post_recv(
+ struct smbd_connection *info, struct smbd_response *response)
+{
+ struct ib_recv_wr recv_wr, *recv_wr_fail = NULL;
+ int rc = -EIO;
+
+ response->sge.addr = ib_dma_map_single(
+ info->id->device, response->packet,
+ info->max_receive_size, DMA_FROM_DEVICE);
+ if (ib_dma_mapping_error(info->id->device, response->sge.addr))
+ return rc;
+
+ response->sge.length = info->max_receive_size;
+ response->sge.lkey = info->pd->local_dma_lkey;
+
+ response->cqe.done = recv_done;
+
+ recv_wr.wr_cqe = &response->cqe;
+ recv_wr.next = NULL;
+ recv_wr.sg_list = &response->sge;
+ recv_wr.num_sge = 1;
+
+ atomic_inc(&info->recv_pending);
+ rc = ib_post_recv(info->id->qp, &recv_wr, &recv_wr_fail);
+ if (rc) {
+ ib_dma_unmap_single(info->id->device, response->sge.addr,
+ response->sge.length, DMA_FROM_DEVICE);
+
+ log_rdma_recv("ib_post_recv failed rc=%d\n", rc);
+ atomic_dec(&info->recv_pending);
+ }
+
+ return rc;
+}
+
+/* Perform SMBD negotiate according to [MS-SMBD] 3.1.5.2 */
+static int smbd_negotiate(struct smbd_connection *info)
+{
+ int rc;
+ struct smbd_response *response = get_receive_buffer(info);
+
+ response->type = SMBD_NEGOTIATE_RESP;
+ rc = smbd_post_recv(info, response);
+ log_rdma_event("smbd_post_recv rc=%d iov.addr=%llx iov.length=%x "
+ "iov.lkey=%x\n",
+ rc, response->sge.addr,
+ response->sge.length, response->sge.lkey);
+ if (rc)
+ return rc;
+
+ init_completion(&info->negotiate_completion);
+ info->negotiate_done = false;
+ rc = smbd_post_send_negotiate_req(info);
+ if (rc)
+ return rc;
+
+ rc = wait_for_completion_interruptible_timeout(
+ &info->negotiate_completion, SMBD_NEGOTIATE_TIMEOUT * HZ);
+ log_rdma_event("wait_for_completion_timeout rc=%d\n", rc);
+
+ if (info->negotiate_done)
+ return 0;
+
+ if (rc == 0)
+ rc = -ETIMEDOUT;
+ else if (rc == -ERESTARTSYS)
+ rc = -EINTR;
+ else
+ rc = -ENOTCONN;
+
+ return rc;
+}
+
+/*
+ * Implement Connection.FragmentReassemblyBuffer defined in [MS-SMBD] 3.1.1.1
+ * This is a queue for reassembling upper layer payload and present to upper
+ * layer. All the inncoming payload go to the reassembly queue, regardless of
+ * if reassembly is required. The uuper layer code reads from the queue for all
+ * incoming payloads.
+ * Put a received packet to the reassembly queue
+ * response: the packet received
+ * data_length: the size of payload in this packet
+ */
+static void enqueue_reassembly(
+ struct smbd_connection *info,
+ struct smbd_response *response,
+ int data_length)
+{
+ spin_lock(&info->reassembly_queue_lock);
+ list_add_tail(&response->list, &info->reassembly_queue);
+ info->reassembly_data_length += data_length;
+ log_reassembly_queue("info->reassembly_data_length=%d\n",
+ info->reassembly_data_length);
+ info->count_reassembly_queue++;
+ info->count_enqueue_reassembly_queue++;
+ spin_unlock(&info->reassembly_queue_lock);
+}
+
+/*
+ * Get the first entry at the front of reassembly queue
+ * Caller is responsible for locking
+ * return value: the first entry if any, NULL if queue is empty
+ */
+static struct smbd_response *_get_first_reassembly(struct smbd_connection *info)
+{
+ struct smbd_response *ret = NULL;
+
+ if (!list_empty(&info->reassembly_queue)) {
+ ret = list_first_entry(
+ &info->reassembly_queue,
+ struct smbd_response, list);
+ }
+ return ret;
+}
+
+/*
+ * Get a receive buffer
+ * For each remote send, we need to post a receive. The receive buffers are
+ * pre-allocated in advance.
+ * return value: the receive buffer, NULL if none is available
+ */
+static struct smbd_response *get_receive_buffer(struct smbd_connection *info)
+{
+ struct smbd_response *ret = NULL;
+
+ spin_lock(&info->receive_queue_lock);
+ if (!list_empty(&info->receive_queue)) {
+ ret = list_first_entry(
+ &info->receive_queue,
+ struct smbd_response, list);
+ list_del(&ret->list);
+ info->count_receive_buffer--;
+ info->count_get_receive_buffer++;
+ }
+ spin_unlock(&info->receive_queue_lock);
+
+ return ret;
+}
+
+/*
+ * Return a receive buffer
+ * Upon returning of a receive buffer, we can post new receive and extend
+ * more receive credits to remote peer. This is done immediately after a
+ * receive buffer is returned.
+ */
+static void put_receive_buffer(
+ struct smbd_connection *info, struct smbd_response *response)
+{
+ ib_dma_unmap_single(info->id->device, response->sge.addr,
+ response->sge.length, DMA_FROM_DEVICE);
+
+ spin_lock(&info->receive_queue_lock);
+ list_add_tail(&response->list, &info->receive_queue);
+ info->count_receive_buffer++;
+ info->count_put_receive_buffer++;
+ spin_unlock(&info->receive_queue_lock);
+
+ /* Check if we can post new receive and grant credits to peer */
+ check_and_send_immediate(info);
+}
+
+/* Preallocate all receive buffer on transport establishment */
+static int allocate_receive_buffers(struct smbd_connection *info, int num_buf)
+{
+ int i;
+ struct smbd_response *response;
+
+ INIT_LIST_HEAD(&info->reassembly_queue);
+ spin_lock_init(&info->reassembly_queue_lock);
+ info->reassembly_data_length = 0;
+
+ INIT_LIST_HEAD(&info->receive_queue);
+ spin_lock_init(&info->receive_queue_lock);
+
+ for (i = 0; i < num_buf; i++) {
+ response = mempool_alloc(info->response_mempool, GFP_KERNEL);
+ if (!response)
+ goto allocate_failed;
+
+ response->info = info;
+ list_add_tail(&response->list, &info->receive_queue);
+ info->count_receive_buffer++;
+ }
+
+ return 0;
+
+allocate_failed:
+ while (!list_empty(&info->receive_queue)) {
+ response = list_first_entry(
+ &info->receive_queue,
+ struct smbd_response, list);
+ list_del(&response->list);
+ info->count_receive_buffer--;
+
+ mempool_free(response, info->response_mempool);
+ }
+ return -ENOMEM;
+}
+
+static void destroy_receive_buffers(struct smbd_connection *info)
+{
+ struct smbd_response *response;
+
+ while ((response = get_receive_buffer(info)))
+ mempool_free(response, info->response_mempool);
+}
+
+/*
+ * Check and send an immediate or keep alive packet
+ * The condition to send those packets are defined in [MS-SMBD] 3.1.1.1
+ * Connection.KeepaliveRequested and Connection.SendImmediate
+ * The idea is to extend credits to server as soon as it becomes available
+ */
+static void send_immediate_work(struct work_struct *work)
+{
+ struct smbd_connection *info = container_of(
+ work, struct smbd_connection,
+ send_immediate_work.work);
+
+ if (info->keep_alive_requested == KEEP_ALIVE_PENDING ||
+ info->send_immediate) {
+ log_keep_alive("send an empty message\n");
+ smbd_post_send_empty(info);
+ }
+}
+
+/* Implement idle connection timer [MS-SMBD] 3.1.6.2 */
+static void idle_connection_timer(struct work_struct *work)
+{
+ struct smbd_connection *info = container_of(
+ work, struct smbd_connection,
+ idle_timer_work.work);
+
+ if (info->keep_alive_requested != KEEP_ALIVE_NONE) {
+ log_keep_alive("error status info->keep_alive_requested=%d\n",
+ info->keep_alive_requested);
+ smbd_disconnect_rdma_connection(info);
+ }
+
+ log_keep_alive("about to send an empty idle message\n");
+ smbd_post_send_empty(info);
+
+ /* Setup the next idle timeout work */
+ queue_delayed_work(info->workqueue, &info->idle_timer_work,
+ info->keep_alive_interval*HZ);
+}
+
+/* Destroy this SMBD connection, called from upper layer */
+void smbd_destroy(struct smbd_connection *info)
+{
+ log_rdma_event("destroying rdma session\n");
+
+ /* Kick off the disconnection process */
+ if (info->transport_status == SMBD_CONNECTED)
+ rdma_disconnect(info->id);
+
+ info->server_info->tcpStatus = CifsExiting;
+
+ log_rdma_event("wait for transport being destroyed\n");
+ wait_event(info->wait_destroy,
+ info->transport_status == SMBD_DESTROYED);
+}
+
+/*
+ * Reconnect this SMBD connection, called from upper layer
+ * return value: 0 on success, or actual error code
+ */
+int smbd_reconnect(struct TCP_Server_Info *server)
+{
+ log_rdma_event("reconnecting rdma session\n");
+
+ /* why reconnect while it is still connected? */
+ if (server->smbd_conn->transport_status == SMBD_CONNECTED) {
+ log_rdma_event("still connected, not reconnecting\n");
+ return -EINVAL;
+ }
+
+ /* wait until the transport is destroyed */
+ wait_event(server->smbd_conn->wait_destroy,
+ server->smbd_conn->transport_status == SMBD_DESTROYED);
+
+ kfree(server->smbd_conn);
+
+ log_rdma_event("creating rdma session\n");
+ server->smbd_conn = smbd_get_connection(
+ server, (struct sockaddr *) &server->dstaddr);
+
+ return server->smbd_conn ? 0 : -ENOENT;
+}
+
+#define MAX_NAME_LEN 80
+static int allocate_caches_and_workqueue(struct smbd_connection *info)
+{
+ char name[MAX_NAME_LEN];
+
+ snprintf(name, MAX_NAME_LEN, "smbd_request_%p", info);
+ info->request_cache =
+ kmem_cache_create(
+ name,
+ sizeof(struct smbd_request) +
+ sizeof(struct smbd_data_transfer),
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (!info->request_cache)
+ return -ENOMEM;
+
+ info->request_mempool =
+ mempool_create(info->send_credit_target, mempool_alloc_slab,
+ mempool_free_slab, info->request_cache);
+ if (!info->request_mempool)
+ goto out1;
+
+ snprintf(name, MAX_NAME_LEN, "smbd_response_%p", info);
+ info->response_cache =
+ kmem_cache_create(
+ name,
+ sizeof(struct smbd_response) +
+ info->max_receive_size,
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (!info->response_cache)
+ goto out2;
+
+ info->response_mempool =
+ mempool_create(info->receive_credit_max, mempool_alloc_slab,
+ mempool_free_slab, info->response_cache);
+ if (!info->response_mempool)
+ goto out3;
+
+ snprintf(name, MAX_NAME_LEN, "smbd_%p", info);
+ info->workqueue = create_workqueue(name);
+ if (!info->workqueue)
+ goto out4;
+
+ return 0;
+
+out4:
+ mempool_destroy(info->response_mempool);
+out3:
+ kmem_cache_destroy(info->response_cache);
+out2:
+ mempool_destroy(info->request_mempool);
+out1:
+ kmem_cache_destroy(info->request_cache);
+ return -ENOMEM;
+}
+
+/* Create a SMBD connection, called by upper layer */
+struct smbd_connection *smbd_get_connection(
+ struct TCP_Server_Info *server, struct sockaddr *dstaddr)
+{
+ int rc;
+ struct smbd_connection *info;
+ struct rdma_conn_param conn_param;
+ struct ib_qp_init_attr qp_attr;
+ struct sockaddr_in *addr_in = (struct sockaddr_in *) dstaddr;
+ int port;
+
+ info = kzalloc(sizeof(struct smbd_connection), GFP_KERNEL);
+ if (!info)
+ return NULL;
+
+ info->server_info = server;
+ info->transport_status = SMBD_CONNECTING;
+
+ port = SMB_PORT;
+try_another_port:
+ rc = smbd_ia_open(info, dstaddr, port);
+ if (rc) {
+ log_rdma_event("smbd_ia_open rc=%d\n", rc);
+ goto out1;
+ }
+
+ if (send_credit_target > info->id->device->attrs.max_cqe ||
+ send_credit_target > info->id->device->attrs.max_qp_wr) {
+ log_rdma_event("consider lowering send_credit_target = %d. "
+ "Possible CQE overrun, device "
+ "reporting max_cpe %d max_qp_wr %d\n",
+ send_credit_target,
+ info->id->device->attrs.max_cqe,
+ info->id->device->attrs.max_qp_wr);
+ goto out2;
+ }
+
+ if (receive_credit_max > info->id->device->attrs.max_cqe ||
+ receive_credit_max > info->id->device->attrs.max_qp_wr) {
+ log_rdma_event("consider lowering receive_credit_max = %d. "
+ "Possible CQE overrun, device "
+ "reporting max_cpe %d max_qp_wr %d\n",
+ receive_credit_max,
+ info->id->device->attrs.max_cqe,
+ info->id->device->attrs.max_qp_wr);
+ goto out2;
+ }
+
+ info->receive_credit_max = receive_credit_max;
+ info->send_credit_target = send_credit_target;
+ info->max_send_size = max_send_size;
+ info->max_fragmented_recv_size = max_fragmented_recv_size;
+ info->max_receive_size = max_receive_size;
+ info->keep_alive_interval = keep_alive_interval;
+
+ max_send_sge = min_t(int, max_send_sge,
+ info->id->device->attrs.max_sge);
+ max_recv_sge = min_t(int, max_recv_sge,
+ info->id->device->attrs.max_sge_rd);
+
+ info->send_cq = ib_alloc_cq(info->id->device, info,
+ info->send_credit_target, 0, IB_POLL_WORKQUEUE);
+ if (IS_ERR(info->send_cq))
+ goto out2;
+
+ info->recv_cq = ib_alloc_cq(info->id->device, info,
+ info->receive_credit_max, 0, IB_POLL_WORKQUEUE);
+ if (IS_ERR(info->recv_cq))
+ goto out2;
+
+ memset(&qp_attr, 0, sizeof(qp_attr));
+ qp_attr.event_handler = smbd_qp_async_error_upcall;
+ qp_attr.qp_context = info;
+ qp_attr.cap.max_send_wr = info->send_credit_target;
+ qp_attr.cap.max_recv_wr = info->receive_credit_max;
+ qp_attr.cap.max_send_sge = max_send_sge;
+ qp_attr.cap.max_recv_sge = max_recv_sge;
+ qp_attr.cap.max_inline_data = 0;
+ qp_attr.sq_sig_type = IB_SIGNAL_REQ_WR;
+ qp_attr.qp_type = IB_QPT_RC;
+ qp_attr.send_cq = info->send_cq;
+ qp_attr.recv_cq = info->recv_cq;
+ qp_attr.port_num = ~0;
+
+ rc = rdma_create_qp(info->id, info->pd, &qp_attr);
+ if (rc) {
+ log_rdma_event("rdma_create_qp failed %i\n", rc);
+ rc = -ENETUNREACH;
+ goto out2;
+ }
+
+ memset(&conn_param, 0, sizeof(conn_param));
+ conn_param.private_data = NULL;
+ conn_param.private_data_len = 0;
+ conn_param.initiator_depth = 0;
+
+ conn_param.responder_resources =
+ info->id->device->attrs.max_qp_rd_atom
+ < SMBD_CM_RESPONDER_RESOURCES ?
+ info->id->device->attrs.max_qp_rd_atom :
+ SMBD_CM_RESPONDER_RESOURCES;
+ info->responder_resources = conn_param.responder_resources;
+ log_rdma_mr("responder_resources=%d\n", info->responder_resources);
+
+ conn_param.retry_count = SMBD_CM_RETRY;
+ conn_param.rnr_retry_count = SMBD_CM_RNR_RETRY;
+ conn_param.flow_control = 0;
+ init_waitqueue_head(&info->conn_wait);
+ init_waitqueue_head(&info->wait_destroy);
+
+ log_rdma_event("connecting to IP %pI4 port %d\n",
+ &addr_in->sin_addr, port);
+
+ rc = rdma_connect(info->id, &conn_param);
+ if (rc) {
+ log_rdma_event("rdma_connect() failed with %i\n", rc);
+ goto out2;
+ }
+
+ wait_event_interruptible(
+ info->conn_wait, info->transport_status == SMBD_CONNECTED);
+ if (info->connect_state != RDMA_CM_EVENT_ESTABLISHED)
+ goto out2;
+
+ log_rdma_event("rdma_connect connected\n");
+
+ rc = allocate_caches_and_workqueue(info);
+ if (rc) {
+ log_rdma_event("cache allocation failed\n");
+ goto out2;
+ }
+
+ rc = allocate_receive_buffers(info, info->receive_credit_max);
+ if (rc) {
+ log_rdma_event("failed to allocate receive buffers\n");
+ goto out2;
+ }
+
+ init_waitqueue_head(&info->wait_send_queue);
+ init_waitqueue_head(&info->wait_reassembly_queue);
+
+ INIT_DELAYED_WORK(&info->idle_timer_work, idle_connection_timer);
+ INIT_DELAYED_WORK(&info->send_immediate_work, send_immediate_work);
+ queue_delayed_work(info->workqueue, &info->idle_timer_work,
+ info->keep_alive_interval*HZ);
+
+ init_waitqueue_head(&info->wait_send_pending);
+ atomic_set(&info->send_pending, 0);
+
+ init_waitqueue_head(&info->wait_send_payload_pending);
+ atomic_set(&info->send_payload_pending, 0);
+
+ init_waitqueue_head(&info->wait_recv_pending);
+ atomic_set(&info->recv_pending, 0);
+
+ init_waitqueue_head(&info->wait_read_pending);
+ atomic_set(&info->read_pending, 0);
+
+ INIT_WORK(&info->disconnect_work, smbd_disconnect_rdma_work);
+ INIT_WORK(&info->destroy_work, smbd_destroy_rdma_work);
+
+ rc = smbd_negotiate(info);
+ if (rc) {
+ log_rdma_event("smbd_negotiate rc=%d\n", rc);
+ goto negotiation_failed;
+ }
+
+ rc = allocate_mr_list(info);
+ if (rc) {
+ log_rdma_mr("memory registration allocation failed\n");
+ goto negotiation_failed;
+ }
+
+ return info;
+
+negotiation_failed:
+ smbd_destroy(info);
+
+out2:
+ rdma_destroy_id(info->id);
+ /* try port SMBD_PORT if SMB_PORT doesn't work */
+ if (port == SMB_PORT) {
+ port = SMBD_PORT;
+ goto try_another_port;
+ }
+
+out1:
+ kfree(info);
+ return NULL;
+}
+
+/*
+ * Receive a page from receive reassembly queue
+ * page: the page to read data into
+ * to_read: the length of data to read
+ * return value: actual data read
+ */
+int smbd_recv_page(struct smbd_connection *info,
+ struct page *page, unsigned int to_read)
+{
+ int ret;
+ char *to_address;
+
+ /* make sure we have the page ready for read */
+ ret = wait_event_interruptible(
+ info->wait_reassembly_queue,
+ info->reassembly_data_length >= to_read ||
+ info->transport_status != SMBD_CONNECTED);
+ if (ret)
+ return 0;
+
+ /* now we can read from reassembly queue and not sleep */
+ to_address = kmap_atomic(page);
+
+ log_read("reading from page=%p address=%p to_read=%d\n",
+ page, to_address, to_read);
+
+ ret = smbd_recv(info, to_address, to_read);
+ kunmap_atomic(to_address);
+
+ return ret;
+}
+
+/*
+ * Receive data from receive reassembly queue
+ * All the incoming data packets are placed in reassembly queue
+ * buf: the buffer to read data into
+ * size: the length of data to read
+ * return value: actual data read
+ * Note: this implementation copies the data from reassebmly queue to receive
+ * buffers used by upper layer. This is not the optimal code path. A better way
+ * to do it is to not have upper layer allocate its receive buffers but rather
+ * borrow the buffer from reassembly queue, and return it after data is
+ * consumed. But this will require more changes to upper layer code, and also
+ * need to consider packet boundaries while they still being reassembled.
+ */
+int smbd_recv(struct smbd_connection *info, char *buf, unsigned int size)
+{
+ struct smbd_response *response;
+ struct smbd_data_transfer *data_transfer;
+ int to_copy, to_read, data_read, offset;
+ u32 data_length, remaining_data_length, data_offset;
+ int rc;
+
+again:
+ /* the transport is disconnected? */
+ if (info->transport_status != SMBD_CONNECTED) {
+ log_read("disconnected\n");
+
+ /*
+ * FIXME If upper layer code is reading SMB packet length
+ * return 0 to indicate transport is disconnected and
+ * trigger a reconnect.
+ */
+ return 0;
+ }
+
+ /*
+ * No need to hold the reassembly queue lock all the time as we are
+ * the only one reading from the front of the queue. The transport
+ * may add more entries to the back of the queeu at the same time
+ */
+ log_read("size=%d info->reassembly_data_length=%d\n", size,
+ info->reassembly_data_length);
+ if (info->reassembly_data_length >= size) {
+ atomic_inc(&info->read_pending);
+ data_read = 0;
+ to_read = size;
+ offset = info->first_entry_offset;
+ while (data_read < size) {
+ spin_lock(&info->reassembly_queue_lock);
+ response = _get_first_reassembly(info);
+ spin_unlock(&info->reassembly_queue_lock);
+ data_transfer = smbd_response_payload(response);
+
+ data_length = le32_to_cpu(data_transfer->data_length);
+ remaining_data_length =
+ le32_to_cpu(
+ data_transfer->remaining_data_length);
+ data_offset = le32_to_cpu(data_transfer->data_offset);
+
+ /*
+ * The upper layer expects RFC1002 length at the
+ * beginning of the payload. Return it to indicate
+ * the total length of the packet. This minimize the
+ * change to upper layer packet processing logic. This
+ * will be eventually remove when an intermediate
+ * transport layer is added
+ */
+ if (response->first_segment && size == 4) {
+ unsigned int rfc1002_len =
+ data_length + remaining_data_length;
+ *((__be32 *)buf) = cpu_to_be32(rfc1002_len);
+ data_read = 4;
+ response->first_segment = false;
+ log_read("returning rfc1002 length %d\n",
+ rfc1002_len);
+ goto read_rfc1002_done;
+ }
+
+ to_copy = min_t(int, data_length - offset, to_read);
+ memcpy(
+ buf + data_read,
+ (char *)data_transfer + data_offset + offset,
+ to_copy);
+
+ /* move on to the next buffer? */
+ if (to_copy == data_length - offset) {
+ spin_lock(&info->reassembly_queue_lock);
+ list_del(&response->list);
+ spin_unlock(&info->reassembly_queue_lock);
+
+ info->count_reassembly_queue--;
+ info->count_dequeue_reassembly_queue++;
+ put_receive_buffer(info, response);
+ offset = 0;
+ log_read("put_receive_buffer offset=0\n");
+ } else
+ offset += to_copy;
+
+ to_read -= to_copy;
+ data_read += to_copy;
+
+ log_read("_get_first_reassembly memcpy %d bytes "
+ "data_transfer_length-offset=%d after that "
+ "to_read=%d data_read=%d offset=%d\n",
+ to_copy, data_length - offset,
+ to_read, data_read, offset);
+ }
+
+ spin_lock(&info->reassembly_queue_lock);
+ info->reassembly_data_length -= data_read;
+ spin_unlock(&info->reassembly_queue_lock);
+
+ info->first_entry_offset = offset;
+ log_read("returning to thread data_read=%d "
+ "reassembly_data_length=%d first_entry_offset=%d\n",
+ data_read, info->reassembly_data_length,
+ info->first_entry_offset);
+read_rfc1002_done:
+ if (atomic_dec_and_test(&info->read_pending))
+ wake_up(&info->wait_read_pending);
+ return data_read;
+ }
+
+ log_read("wait_event on more data\n");
+ rc = wait_event_interruptible(
+ info->wait_reassembly_queue,
+ info->reassembly_data_length >= size ||
+ info->transport_status != SMBD_CONNECTED);
+ /* Don't return any data if interrupted */
+ if (rc)
+ return 0;
+
+ goto again;
+}
+
+/*
+ * Send data to transport
+ * Each rqst is transported as a SMBDirect payload
+ * rqst: the data to write
+ * return value: 0 if successfully write, otherwise error code
+ */
+int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst)
+{
+ struct kvec vec;
+ int nvecs;
+ int size;
+ int buflen = 0, remaining_data_length;
+ int start, i, j;
+ int max_iov_size =
+ info->max_send_size - sizeof(struct smbd_data_transfer);
+ struct kvec iov[SMBDIRECT_MAX_SGE];
+ int rc;
+
+ if (info->transport_status != SMBD_CONNECTED) {
+ log_write("disconnected returning -EIO\n");
+ return -EIO;
+ }
+
+ /*
+ * This usually means a configuration error
+ * We use RDMA read/write for packet size > rdma_readwrite_threshold
+ * as long as it's properly configured we should never get into this
+ * situation
+ */
+ if (rqst->rq_nvec + rqst->rq_npages > SMBDIRECT_MAX_SGE) {
+ log_write("maximum send segment %x exceeding %x\n",
+ rqst->rq_nvec + rqst->rq_npages, SMBDIRECT_MAX_SGE);
+ return -EINVAL;
+ }
+
+ /*
+ * Remove the RFC1002 length defined in MS-SMB2 section 2.1
+ * It is used only for TCP transport
+ * In future we may want to add a transport layer under protocol
+ * layer so this will only be issued to TCP transport
+ */
+ iov[0].iov_base = (char *)rqst->rq_iov[0].iov_base + 4;
+ iov[0].iov_len = rqst->rq_iov[0].iov_len - 4;
+ buflen += iov[0].iov_len;
+
+ /* total up iov array first */
+ for (i = 1; i < rqst->rq_nvec; i++) {
+ iov[i].iov_base = rqst->rq_iov[i].iov_base;
+ iov[i].iov_len = rqst->rq_iov[i].iov_len;
+ buflen += iov[i].iov_len;
+ }
+
+ /* add in the page array if there is one */
+ if (rqst->rq_npages) {
+ buflen += rqst->rq_pagesz * (rqst->rq_npages - 1);
+ buflen += rqst->rq_tailsz;
+ }
+
+ if (buflen + sizeof(struct smbd_data_transfer) >
+ info->max_fragmented_send_size) {
+ log_write("payload size %d > max size %d\n",
+ buflen, info->max_fragmented_send_size);
+ rc = -EINVAL;
+ goto done;
+ }
+
+ remaining_data_length = buflen;
+
+ log_write("rqst->rq_nvec=%d rqst->rq_npages=%d rq_pagesz=%d "
+ "rq_tailsz=%d buflen=%d\n",
+ rqst->rq_nvec, rqst->rq_npages, rqst->rq_pagesz,
+ rqst->rq_tailsz, buflen);
+
+ start = i = iov[0].iov_len ? 0 : 1;
+ buflen = 0;
+ while (true) {
+ buflen += iov[i].iov_len;
+ if (buflen > max_iov_size) {
+ if (i > start) {
+ remaining_data_length -=
+ (buflen-iov[i].iov_len);
+ log_write("sending iov[] from start=%d "
+ "i=%d nvecs=%d "
+ "remaining_data_length=%d\n",
+ start, i, i-start,
+ remaining_data_length);
+ rc = smbd_post_send_data(
+ info, &iov[start], i-start,
+ remaining_data_length);
+ if (rc)
+ goto done;
+ } else {
+ /* iov[start] is too big, break it */
+ nvecs = (buflen+max_iov_size-1)/max_iov_size;
+ log_write("iov[%d] iov_base=%p buflen=%d"
+ " break to %d vectors\n",
+ start, iov[start].iov_base,
+ buflen, nvecs);
+ for (j = 0; j < nvecs; j++) {
+ vec.iov_base =
+ (char *)iov[start].iov_base +
+ j*max_iov_size;
+ vec.iov_len = max_iov_size;
+ if (j == nvecs-1)
+ vec.iov_len =
+ buflen -
+ max_iov_size*(nvecs-1);
+ remaining_data_length -= vec.iov_len;
+ log_write(
+ "sending vec j=%d iov_base=%p"
+ " iov_len=%lu "
+ "remaining_data_length=%d\n",
+ j, vec.iov_base, vec.iov_len,
+ remaining_data_length);
+ rc = smbd_post_send_data(
+ info, &vec, 1,
+ remaining_data_length);
+ if (rc)
+ goto done;
+ }
+ i++;
+ }
+ start = i;
+ buflen = 0;
+ } else {
+ i++;
+ if (i == rqst->rq_nvec) {
+ /* send out all remaining vecs */
+ remaining_data_length -= buflen;
+ log_write(
+ "sending iov[] from start=%d i=%d "
+ "nvecs=%d remaining_data_length=%d\n",
+ start, i, i-start,
+ remaining_data_length);
+ rc = smbd_post_send_data(info, &iov[start],
+ i-start, remaining_data_length);
+ if (rc)
+ goto done;
+ break;
+ }
+ }
+ log_write("looping i=%d buflen=%d\n", i, buflen);
+ }
+
+ /* now sending pages if there are any */
+ for (i = 0; i < rqst->rq_npages; i++) {
+ buflen = (i == rqst->rq_npages-1) ?
+ rqst->rq_tailsz : rqst->rq_pagesz;
+ nvecs = (buflen + max_iov_size - 1) / max_iov_size;
+ log_write("sending pages buflen=%d nvecs=%d\n",
+ buflen, nvecs);
+ for (j = 0; j < nvecs; j++) {
+ size = max_iov_size;
+ if (j == nvecs-1)
+ size = buflen - j*max_iov_size;
+ remaining_data_length -= size;
+ log_write("sending pages i=%d offset=%d size=%d"
+ " remaining_data_length=%d\n",
+ i, j*max_iov_size, size, remaining_data_length);
+ rc = smbd_post_send_page(
+ info, rqst->rq_pages[i], j*max_iov_size,
+ size, remaining_data_length);
+ if (rc)
+ goto done;
+ }
+ }
+
+done:
+ /*
+ * As an optimization, we don't wait for individual I/O to finish
+ * before sending the next one.
+ * Send them all and wait for pending send count to get to 0
+ * that means all the I/Os have been out and we are good to return
+ */
+ wait_event(info->wait_send_payload_pending,
+ atomic_read(&info->send_payload_pending) == 0);
+ return rc;
+}
+
+static void register_mr_done(struct ib_cq *cq, struct ib_wc *wc)
+{
+ if (wc->status)
+ log_rdma_mr("status=%d\n", wc->status);
+}
+
+/*
+ * The work queue function that recovers MRs
+ * We need to call ib_dereg_mr() and ib_alloc_mr() before this MR can be used
+ * again. Both calls are slow, so finish them in a workqueue. This will not
+ * block I/O path.
+ * There is one workqueue that recovers MRs, there is no need to lock as the
+ * I/O requests calling smbd_register_mr will never update the links in the
+ * mr_list.
+ */
+static void smbd_mr_recovery_work(struct work_struct *work)
+{
+ struct smbd_connection *info =
+ container_of(work, struct smbd_connection, mr_recovery_work);
+ struct smbd_mr *smbdirect_mr;
+ int rc;
+
+ list_for_each_entry(smbdirect_mr, &info->mr_list, list) {
+ if (smbdirect_mr->state == MR_INVALIDATED ||
+ smbdirect_mr->state == MR_ERROR) {
+
+ /* recover this MR entry */
+ if (smbdirect_mr->state == MR_INVALIDATED)
+ ib_dma_unmap_sg(
+ info->id->device,
+ smbdirect_mr->sgl,
+ smbdirect_mr->sgl_count,
+ smbdirect_mr->dir);
+
+ rc = ib_dereg_mr(smbdirect_mr->mr);
+ if (rc) {
+ log_rdma_mr("ib_dereg_mr faield rc=%x\n", rc);
+ rdma_disconnect(info->id);
+ }
+
+ smbdirect_mr->mr = ib_alloc_mr(
+ info->pd, info->mr_type, info->max_frmr_depth);
+ if (IS_ERR(smbdirect_mr->mr)) {
+ log_rdma_mr(
+ "ib_alloc_mr failed mr_type=%x "
+ "max_frmr_depth=%x\n",
+ info->mr_type, info->max_frmr_depth);
+ rdma_disconnect(info->id);
+ }
+
+ smbdirect_mr->state = MR_READY;
+ /* smbdirect_mr->state is updated by this function
+ * and is read and updated by I/O issuing CPUs trying
+ * to get a MR, the call to atomic_inc_return
+ * implicates a memory barrier and guarantees this
+ * value is updated before waking up any calls to
+ * get_mr() from the I/O issuing CPUs
+ */
+ if (atomic_inc_return(&info->mr_ready_count) == 1)
+ wake_up_interruptible(&info->wait_mr);
+ }
+ }
+}
+
+static void destroy_mr_list(struct smbd_connection *info)
+{
+ struct smbd_mr *mr, *tmp;
+
+ cancel_work_sync(&info->mr_recovery_work);
+ list_for_each_entry_safe(mr, tmp, &info->mr_list, list) {
+ if (mr->state == MR_INVALIDATED)
+ ib_dma_unmap_sg(info->id->device, mr->sgl,
+ mr->sgl_count, mr->dir);
+ ib_dereg_mr(mr->mr);
+ kfree(mr->sgl);
+ kfree(mr);
+ }
+}
+
+/*
+ * Allocate MRs used for RDMA read/write
+ * The number of MRs will not exceed hardware capability in responder_resources
+ * All MRs are kept in mr_list. The MR can be recovered after it's used
+ * Recovery is done in smbd_mr_recovery_work. The content of list entry changes
+ * as MRs are used and recovered for I/O, but the list links will not change
+ */
+static int allocate_mr_list(struct smbd_connection *info)
+{
+ int i;
+ struct smbd_mr *smbdirect_mr, *tmp;
+
+ INIT_LIST_HEAD(&info->mr_list);
+ init_waitqueue_head(&info->wait_mr);
+ spin_lock_init(&info->mr_list_lock);
+ atomic_set(&info->mr_ready_count, 0);
+ for (i = 0; i < info->responder_resources; i++) {
+ smbdirect_mr = kzalloc(sizeof(*smbdirect_mr), GFP_KERNEL);
+ if (!smbdirect_mr)
+ goto out;
+ smbdirect_mr->mr = ib_alloc_mr(info->pd, info->mr_type,
+ info->max_frmr_depth);
+ if (IS_ERR(smbdirect_mr->mr)) {
+ log_rdma_mr("ib_alloc_mr failed mr_type=%x "
+ "max_frmr_depth=%x\n",
+ info->mr_type, info->max_frmr_depth);
+ goto out;
+ }
+ smbdirect_mr->sgl = kcalloc(
+ info->max_frmr_depth,
+ sizeof(struct scatterlist),
+ GFP_KERNEL);
+ if (!smbdirect_mr->sgl) {
+ log_rdma_mr("failed to allocate sgl\n");
+ ib_dereg_mr(smbdirect_mr->mr);
+ goto out;
+ }
+ smbdirect_mr->state = MR_READY;
+ smbdirect_mr->conn = info;
+
+ list_add_tail(&smbdirect_mr->list, &info->mr_list);
+ atomic_inc(&info->mr_ready_count);
+ }
+ INIT_WORK(&info->mr_recovery_work, smbd_mr_recovery_work);
+ return 0;
+
+out:
+ kfree(smbdirect_mr);
+
+ list_for_each_entry_safe(smbdirect_mr, tmp, &info->mr_list, list) {
+ ib_dereg_mr(smbdirect_mr->mr);
+ kfree(smbdirect_mr->sgl);
+ kfree(smbdirect_mr);
+ }
+ return -ENOMEM;
+}
+
+/*
+ * Get a MR from mr_list. This function waits until there is at least one
+ * MR available in the list. It may access the list while the
+ * smbd_mr_recovery_work is recovering the MR list. This doesn't need a lock
+ * as they never modify the same places. However, there may be several CPUs
+ * issueing I/O trying to get MR at the same time, mr_list_lock is used to
+ * protect this situation.
+ */
+static struct smbd_mr *get_mr(struct smbd_connection *info)
+{
+ struct smbd_mr *ret;
+ int rc;
+again:
+ rc = wait_event_interruptible(info->wait_mr,
+ atomic_read(&info->mr_ready_count) ||
+ info->transport_status != SMBD_CONNECTED);
+ if (rc) {
+ log_rdma_mr("wait_event_interruptible rc=%x\n", rc);
+ return NULL;
+ }
+
+ if (info->transport_status != SMBD_CONNECTED) {
+ log_rdma_mr("info->transport_status=%x\n",
+ info->transport_status);
+ return NULL;
+ }
+
+ spin_lock(&info->mr_list_lock);
+ list_for_each_entry(ret, &info->mr_list, list) {
+ if (ret->state == MR_READY) {
+ ret->state = MR_REGISTERED;
+ atomic_dec(&info->mr_ready_count);
+ spin_unlock(&info->mr_list_lock);
+ return ret;
+ }
+ }
+
+ spin_unlock(&info->mr_list_lock);
+ /*
+ * It is possible that we can get a MR because other processes may try
+ * to acquire a MR at the same time. If this is the case, retry it.
+ */
+ goto again;
+}
+
+/*
+ * Register memory for RDMA read/write
+ * pages[]: the list of pages to register memory with
+ * num_pages: the number of pages to register
+ * tailsz: if non-zero, the bytes to register in the last page
+ * writing: true if this is a RDMA write (SMB read), false for RDMA read
+ * need_invalidate: true if this MR needs to be locally invalidated after I/O
+ * return value: the MR registered, NULL if failed.
+ */
+struct smbd_mr *smbd_register_mr(
+ struct smbd_connection *info, struct page *pages[], int num_pages,
+ int tailsz, bool writing, bool need_invalidate)
+{
+ struct smbd_mr *smbdirect_mr;
+ int rc, i;
+ enum dma_data_direction dir;
+ struct ib_reg_wr *reg_wr;
+ struct ib_send_wr *bad_wr;
+
+ if (num_pages > info->max_frmr_depth) {
+ log_rdma_mr("num_pages=%d max_frmr_depth=%d\n",
+ num_pages, info->max_frmr_depth);
+ return NULL;
+ }
+
+ smbdirect_mr = get_mr(info);
+ if (!smbdirect_mr) {
+ log_rdma_mr("get_mr returning NULL\n");
+ return NULL;
+ }
+ smbdirect_mr->need_invalidate = need_invalidate;
+ smbdirect_mr->sgl_count = num_pages;
+ sg_init_table(smbdirect_mr->sgl, num_pages);
+
+ for (i = 0; i < num_pages - 1; i++)
+ sg_set_page(&smbdirect_mr->sgl[i], pages[i], PAGE_SIZE, 0);
+ sg_set_page(&smbdirect_mr->sgl[i], pages[i],
+ tailsz ? tailsz : PAGE_SIZE, 0);
+
+ dir = writing ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ smbdirect_mr->dir = dir;
+ rc = ib_dma_map_sg(info->id->device, smbdirect_mr->sgl, num_pages, dir);
+ if (!rc) {
+ log_rdma_mr("ib_dma_map_sg num_pages=%x dir=%x rc=%x\n",
+ num_pages, dir, rc);
+ goto dma_map_error;
+ }
+
+ rc = ib_map_mr_sg(smbdirect_mr->mr, smbdirect_mr->sgl, num_pages,
+ NULL, PAGE_SIZE);
+ if (rc != num_pages) {
+ log_rdma_mr("ib_map_mr_sg failed rc = %x num_pages = %x\n",
+ rc, num_pages);
+ goto map_mr_error;
+ }
+
+ ib_update_fast_reg_key(smbdirect_mr->mr,
+ ib_inc_rkey(smbdirect_mr->mr->rkey));
+ reg_wr = &smbdirect_mr->wr;
+ reg_wr->wr.opcode = IB_WR_REG_MR;
+ smbdirect_mr->cqe.done = register_mr_done;
+ reg_wr->wr.wr_cqe = &smbdirect_mr->cqe;
+ reg_wr->wr.num_sge = 0;
+ reg_wr->wr.send_flags = IB_SEND_SIGNALED;
+ reg_wr->mr = smbdirect_mr->mr;
+ reg_wr->key = smbdirect_mr->mr->rkey;
+ reg_wr->access = writing ?
+ IB_ACCESS_REMOTE_WRITE | IB_ACCESS_LOCAL_WRITE :
+ IB_ACCESS_REMOTE_READ;
+
+ /*
+ * There is no need for waiting for complemtion on ib_post_send
+ * on IB_WR_REG_MR. Hardware enforces a barrier and order of execution
+ * on the next ib_post_send when we actaully send I/O to remote peer
+ */
+ rc = ib_post_send(info->id->qp, &reg_wr->wr, &bad_wr);
+ if (!rc)
+ return smbdirect_mr;
+
+ log_rdma_mr("ib_post_send failed rc=%x reg_wr->key=%x\n",
+ rc, reg_wr->key);
+
+ /* If all failed, attempt to recover this MR by setting it MR_ERROR*/
+map_mr_error:
+ ib_dma_unmap_sg(info->id->device, smbdirect_mr->sgl,
+ smbdirect_mr->sgl_count, smbdirect_mr->dir);
+
+dma_map_error:
+ smbdirect_mr->state = MR_ERROR;
+
+ return NULL;
+}
+
+static void local_inv_done(struct ib_cq *cq, struct ib_wc *wc)
+{
+ struct smbd_mr *smbdirect_mr;
+ struct ib_cqe *cqe;
+
+ cqe = wc->wr_cqe;
+ smbdirect_mr = container_of(cqe, struct smbd_mr, cqe);
+ smbdirect_mr->state = MR_INVALIDATED;
+ if (wc->status != IB_WC_SUCCESS) {
+ log_rdma_mr("invalidate failed status=%x\n", wc->status);
+ smbdirect_mr->state = MR_ERROR;
+ }
+ complete(&smbdirect_mr->invalidate_done);
+}
+
+/*
+ * Deregister a MR after I/O is done
+ * This function may wait if remote invalidation is not used
+ * and we have to locally invalidate the buffer to prevent data is being
+ * modified by remote peer after upper layer consumes it
+ */
+int smbd_deregister_mr(struct smbd_mr *smbdirect_mr)
+{
+ struct ib_send_wr *wr, *bad_wr;
+ struct smbd_connection *info = smbdirect_mr->conn;
+ int rc;
+
+ if (info->transport_status != SMBD_CONNECTED)
+ return -ENODEV;
+
+ if (smbdirect_mr->need_invalidate) {
+ /* Need to finish local invalidation before returning */
+ wr = &smbdirect_mr->inv_wr;
+ wr->opcode = IB_WR_LOCAL_INV;
+ smbdirect_mr->cqe.done = local_inv_done;
+ wr->wr_cqe = &smbdirect_mr->cqe;
+ wr->num_sge = 0;
+ wr->ex.invalidate_rkey = smbdirect_mr->mr->rkey;
+ wr->send_flags = IB_SEND_SIGNALED;
+
+ init_completion(&smbdirect_mr->invalidate_done);
+ rc = ib_post_send(info->id->qp, wr, &bad_wr);
+ if (rc) {
+ log_rdma_mr("ib_post_send failed rc=%x\n", rc);
+ rdma_disconnect(info->id);
+ return rc;
+ }
+ wait_for_completion(&smbdirect_mr->invalidate_done);
+ } else
+ /*
+ * For remote invalidation, just set it to MR_INVALIDATED
+ * and defer to mr_recovery_work to recover the MR for next use
+ */
+ smbdirect_mr->state = MR_INVALIDATED;
+
+ /*
+ * Schedule the work to do MR recovery for future I/Os
+ * MR recovery is slow and we don't want it to block the current I/O
+ */
+ schedule_work(&info->mr_recovery_work);
+
+ return 0;
+}
diff --git a/fs/cifs/smbdirect.h b/fs/cifs/smbdirect.h
index 06eeb0b..ec692eb 100644
--- a/fs/cifs/smbdirect.h
+++ b/fs/cifs/smbdirect.h
@@ -16,5 +16,285 @@
#ifndef _SMBDIRECT_H
#define _SMBDIRECT_H

+#include "cifsglob.h"
+#include <rdma/ib_verbs.h>
+#include <rdma/rdma_cm.h>
+#include <linux/mempool.h>
+
+enum keep_alive_status {
+ KEEP_ALIVE_NONE,
+ KEEP_ALIVE_PENDING,
+ KEEP_ALIVE_SENT,
+};
+
+enum smbd_connection_status {
+ SMBD_CREATED,
+ SMBD_CONNECTING,
+ SMBD_CONNECTED,
+ SMBD_DISCONNECTING,
+ SMBD_DISCONNECTED,
+ SMBD_DESTROYED
+};
+
+/*
+ * The context for the SMBDirect transport
+ * Everything related to the transport is here. It has several logical parts
+ * 1. RDMA related structures
+ * 2. SMBDirect connection parameters
+ * 3. Memory registrations
+ * 4. Receive and reassembly queues for data receive path
+ * 5. mempools for allocating packets
+ */
+struct smbd_connection {
+ struct TCP_Server_Info *server_info;
+ enum smbd_connection_status transport_status;
+
+ /* RDMA related */
+ struct rdma_cm_id *id;
+ struct ib_qp_init_attr qp_attr;
+ struct ib_pd *pd;
+ struct ib_cq *send_cq, *recv_cq;
+ struct ib_device_attr dev_attr;
+ int connect_state;
+ int ri_rc;
+ struct completion ri_done;
+ wait_queue_head_t conn_wait;
+ wait_queue_head_t wait_destroy;
+
+ struct completion negotiate_completion;
+ bool negotiate_done;
+
+ struct work_struct destroy_work;
+ struct work_struct disconnect_work;
+
+ /* Connection parameters defined in [MS-SMBD] 3.1.1.1 */
+ int receive_credit_max;
+ int send_credit_target;
+ int max_send_size;
+ int max_fragmented_recv_size;
+ int max_fragmented_send_size;
+ int max_receive_size;
+ int keep_alive_interval;
+ int max_readwrite_size;
+ enum keep_alive_status keep_alive_requested;
+ int protocol;
+ atomic_t send_credits;
+ atomic_t receive_credits;
+ int receive_credit_target;
+ int fragment_reassembly_remaining;
+
+ /* Memory registrations */
+ /* Maximum number of RDMA read/write outstanding on this connection */
+ int responder_resources;
+ /* Maximum number of SGEs in a RDMA write/read */
+ int max_frmr_depth;
+ /*
+ * If payload is less than or equal to the threshold,
+ * use RDMA send/recv to send upper layer I/O.
+ * If payload is more than the threshold,
+ * use RDMA read/write through memory registration for I/O.
+ */
+ int rdma_readwrite_threshold;
+ enum ib_mr_type mr_type;
+ struct list_head mr_list;
+ spinlock_t mr_list_lock;
+ /* The number of available MRs ready for memory registration */
+ atomic_t mr_ready_count;
+ wait_queue_head_t wait_mr;
+ struct work_struct mr_recovery_work;
+
+ /* Activity accoutning */
+ atomic_t send_pending;
+ wait_queue_head_t wait_send_pending;
+ atomic_t send_payload_pending;
+ wait_queue_head_t wait_send_payload_pending;
+ atomic_t recv_pending;
+ wait_queue_head_t wait_recv_pending;
+ atomic_t read_pending;
+ wait_queue_head_t wait_read_pending;
+
+ /* Receive queue */
+ struct list_head receive_queue;
+ spinlock_t receive_queue_lock;
+
+ /* Reassembly queue */
+ struct list_head reassembly_queue;
+ spinlock_t reassembly_queue_lock;
+ wait_queue_head_t wait_reassembly_queue;
+
+ /* total data length of reassembly queue */
+ int reassembly_data_length;
+ /* the offset to first buffer in reassembly queue */
+ int first_entry_offset;
+
+ bool send_immediate;
+
+ wait_queue_head_t wait_send_queue;
+
+ /*
+ * Indicate if we have received a full packet on the connection
+ * This is used to identify the first SMBD packet of a assembled
+ * payload (SMB packet) in reassembly queue so we can return a
+ * RFC1002 length to upper layer to indicate the length of the SMB
+ * packet received
+ */
+ bool full_packet_received;
+
+ struct workqueue_struct *workqueue;
+ struct delayed_work idle_timer_work;
+ struct delayed_work send_immediate_work;
+
+ /* Memory pool for preallocating buffers */
+ /* request pool for RDMA send */
+ struct kmem_cache *request_cache;
+ mempool_t *request_mempool;
+
+ /* response pool for RDMA receive */
+ struct kmem_cache *response_cache;
+ mempool_t *response_mempool;
+
+ /* for debug purposes */
+ unsigned int count_receive_buffer;
+ unsigned int count_get_receive_buffer;
+ unsigned int count_put_receive_buffer;
+ unsigned int count_reassembly_queue;
+ unsigned int count_enqueue_reassembly_queue;
+ unsigned int count_dequeue_reassembly_queue;
+ unsigned int count_send_empty;
+};
+
+enum smbd_message_type {
+ SMBD_NEGOTIATE_RESP,
+ SMBD_TRANSFER_DATA,
+};
+
+#define SMB_DIRECT_RESPONSE_REQUESTED 0x0001
+
+/* SMBD negotiation request packet [MS-SMBD] 2.2.1 */
+struct smbd_negotiate_req {
+ __le16 min_version;
+ __le16 max_version;
+ __le16 reserved;
+ __le16 credits_requested;
+ __le32 preferred_send_size;
+ __le32 max_receive_size;
+ __le32 max_fragmented_size;
+} __packed;
+
+/* SMBD negotiation response packet [MS-SMBD] 2.2.2 */
+struct smbd_negotiate_resp {
+ __le16 min_version;
+ __le16 max_version;
+ __le16 negotiated_version;
+ __le16 reserved;
+ __le16 credits_requested;
+ __le16 credits_granted;
+ __le32 status;
+ __le32 max_readwrite_size;
+ __le32 preferred_send_size;
+ __le32 max_receive_size;
+ __le32 max_fragmented_size;
+} __packed;
+
+/* SMBD data transfer packet with payload [MS-SMBD] 2.2.3 */
+struct smbd_data_transfer {
+ __le16 credits_requested;
+ __le16 credits_granted;
+ __le16 flags;
+ __le16 reserved;
+ __le32 remaining_data_length;
+ __le32 data_offset;
+ __le32 data_length;
+ __le32 padding;
+ __u8 buffer[];
+} __packed;
+
+/* The packet fields for a registered RDMA buffer */
+struct smbd_buffer_descriptor_v1 {
+ __le64 offset;
+ __le32 token;
+ __le32 length;
+} __packed;
+
#define SMBDIRECT_MAX_SGE 16
+/* The context for a SMBD request */
+struct smbd_request {
+ struct smbd_connection *info;
+ struct ib_cqe cqe;
+
+ /* true if this request carries upper layer payload */
+ bool has_payload;
+
+ /* the SGE entries for this packet */
+ struct ib_sge sge[SMBDIRECT_MAX_SGE];
+ int num_sge;
+
+ /* SMBD packet header follows this structure */
+ u8 packet[];
+};
+
+/* The context for a SMBD response */
+struct smbd_response {
+ struct smbd_connection *info;
+ struct ib_cqe cqe;
+ struct ib_sge sge;
+
+ enum smbd_message_type type;
+
+ /* Link to receive queue or reassembly queue */
+ struct list_head list;
+
+ /* Indicate if this is the 1st packet of a payload */
+ bool first_segment;
+
+ /* SMBD packet header and payload follows this structure */
+ u8 packet[];
+};
+
+/* Create a SMBDirect session */
+struct smbd_connection *smbd_get_connection(
+ struct TCP_Server_Info *server, struct sockaddr *dstaddr);
+
+/* Reconnect SMBDirect session */
+int smbd_reconnect(struct TCP_Server_Info *server);
+
+/* Destroy SMBDirect session */
+void smbd_destroy(struct smbd_connection *info);
+
+/* Interface for carrying upper layer I/O through send/recv */
+int smbd_recv(
+ struct smbd_connection *rdma, char *buf, unsigned int to_read);
+int smbd_recv_page(
+ struct smbd_connection *rdma, struct page *page, unsigned int to_read);
+int smbd_send(struct smbd_connection *rdma, struct smb_rqst *rqst);
+
+enum mr_state {
+ MR_READY,
+ MR_REGISTERED,
+ MR_INVALIDATED,
+ MR_ERROR
+};
+
+struct smbd_mr {
+ struct smbd_connection *conn;
+ struct list_head list;
+ enum mr_state state;
+ struct ib_mr *mr;
+ struct scatterlist *sgl;
+ int sgl_count;
+ enum dma_data_direction dir;
+ union {
+ struct ib_reg_wr wr;
+ struct ib_send_wr inv_wr;
+ };
+ struct ib_cqe cqe;
+ bool need_invalidate;
+ struct completion invalidate_done;
+};
+
+/* Interfaces to register and deregister MR for RDMA read/write */
+struct smbd_mr *smbd_register_mr(
+ struct smbd_connection *rdma, struct page *pages[], int num_pages,
+ int tailsz, bool writing, bool need_invalidate);
+int smbd_deregister_mr(struct smbd_mr *mr);
#endif
--
2.7.4