Re: [PATCH kernel] PCI: Disable IOV before pcibios_sriov_disable()

From: Bjorn Helgaas
Date: Fri Aug 18 2017 - 11:27:50 EST


On Fri, Aug 18, 2017 at 08:05:42AM +1000, Alexey Kardashevskiy wrote:
> On 11/08/17 18:19, Alexey Kardashevskiy wrote:
> > From: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
> >
> > The PowerNV platform is the only user of pcibios_sriov_disable().
> > The IOV BAR could be shifted by pci_iov_update_resource(). The
> > warning message in the function is printed if the IOV capability
> > is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state.
> >
> > This is the backtrace of what is happening:
> > pci_disable_sriov
> > sriov_disable
> > pnv_pci_sriov_disable
> > pnv_pci_vf_resource_shift
> > pci_update_resource
> > pci_iov_update_resource
> >
> > This fixes the issue by disabling IOV capability before calling
> > pcibios_sriov_disable(). With it, the disabling path matches
> > the enabling path: pcibios_sriov_enable() is called before the
> > IOV capability is enabled.
> >
> > Cc: shan.gavin@xxxxxxxxx
> > Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> > Cc: Paul Mackerras <paulus@xxxxxxxxx>
> > Reported-by: Carol L Soto <clsoto@xxxxxxxxxx>
> > Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
> > Tested-by: Carol L Soto <clsoto@xxxxxxxxxx>
> > Signed-off-by: Alexey Kardashevskiy <aik@xxxxxxxxx>
> > ---
> >
> > This is repost. Since Gavin left the team, I am trying to push it out.
> > The previos converstion is here: https://patchwork.ozlabs.org/patch/732653/
> >
> > Two questions were raised then. I'll try to comment on this below.
>
> Bjorn, ping? Thanks.

Thanks for the reminder. This is in patchwork, so it's on my to-do
list.

My last response in the thread above was:

I'm not going to merge this without a comment in
pnv_pci_vf_resource_shift() that addresses the two questions I
raised in my very first response. I don't think the existing
comment about "After doing so, there would be a 'hole'" is
sufficient. If it were sufficient, I wouldn't have raised the
questions in the first place.

The problem here is that I'm looking for a comment *in the code*, and
you and Gavin are giving responses and clarifications in email.

What we need to do is transfer this email information into something
useful when reading the code, i.e., a comment in the code.

> >> 1) "res" is already in the resource tree, so we shouldn't be changing
> >> its start address, because that may make the tree inconsistent,
> >> e.g., the resource may no longer be completely contained in its
> >> parent, it may conflict with a sibling, etc.
> >
> > We should not, yes. But...
> >
> > At the boot time IOV BAR gets as much MMIO space as it can possibly use.
> > (Embarassingly I cannot trace where this is coming from, 8GB is selected
> > via pci_assign_unassigned_root_bus_resources() path somehow).
> > For example, it is 256*32MB=8GB where 256 is maximum PEs number and 32MB
> > is a PF/VF BAR size. Whatever shifting we do afterwards, the boudaries of
> > that 8GB area do not change and we test it in pnv_pci_vf_resource_shift():
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/platforms/powernv/pci-ioda.c#n987
> >
> >> 2) If we update "res->start", shouldn't we update "res->end"
> >> correspondingly?
> >
> > We have to update the PF's IOV BAR address as we allocate PEs dynamically
> > and we do not know in advance where our VF numbers start in that
> > 8GB window. So we change IOV BASR start. Changing the end may make it
> > look more like there is a free area to use but in reality it won't be
> > usable as well as the area we "release" by shifting the start address.
> >
> > We could probably move that M64 MMIO window by the same delta in
> > opposite direction so the IOV BAR start address would remain the same
> > but its VF#0 would be mapped to let's say PF#5. I am just afraid there
> > is an alignment requirement for these M64 window start address; and this
> > would be even more tricky to manage.
> >
> > We could also create reserved areas for the amount of space "release" by
> > moving the start address, not sure how though.
> >
> > So how do we proceed with this particular patch now? Thanks.
> > ---
> > drivers/pci/iov.c | 7 ++++---
> > 1 file changed, 4 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> > index 120485d6f352..ac41c8be9200 100644
> > --- a/drivers/pci/iov.c
> > +++ b/drivers/pci/iov.c
> > @@ -331,7 +331,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
> > while (i--)
> > pci_iov_remove_virtfn(dev, i, 0);
> >
> > - pcibios_sriov_disable(dev);
> > err_pcibios:
> > iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
> > pci_cfg_access_lock(dev);
> > @@ -339,6 +338,8 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
> > ssleep(1);
> > pci_cfg_access_unlock(dev);
> >
> > + pcibios_sriov_disable(dev);
> > +
> > if (iov->link != dev->devfn)
> > sysfs_remove_link(&dev->dev.kobj, "dep_link");
> >
> > @@ -357,14 +358,14 @@ static void sriov_disable(struct pci_dev *dev)
> > for (i = 0; i < iov->num_VFs; i++)
> > pci_iov_remove_virtfn(dev, i, 0);
> >
> > - pcibios_sriov_disable(dev);
> > -
> > iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
> > pci_cfg_access_lock(dev);
> > pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
> > ssleep(1);
> > pci_cfg_access_unlock(dev);
> >
> > + pcibios_sriov_disable(dev);
> > +
> > if (iov->link != dev->devfn)
> > sysfs_remove_link(&dev->dev.kobj, "dep_link");
> >
> >
>
>
> --
> Alexey