Re: [PATCH 1/7] media: vb2: add bidirectional flag in vb2_queue

From: Stanimir Varbanov
Date: Fri Aug 18 2017 - 10:42:25 EST


Hi Hans,

On 08/18/2017 05:30 PM, Hans Verkuil wrote:
> On 08/18/17 16:16, Stanimir Varbanov wrote:
>> This change is intended to give to the v4l2 drivers a choice to
>> change the default behavior of the v4l2-core DMA mapping direction
>> from DMA_TO/FROM_DEVICE (depending on the buffer type CAPTURE or
>> OUTPUT) to DMA_BIDIRECTIONAL during queue_init time.
>>
>> Initially the issue with DMA mapping direction has been found in
>> Venus encoder driver where the hardware (firmware side) adds few
>> lines padding on bottom of the image buffer, and the consequence
>> is triggering of IOMMU protection faults.
>>
>> This will help supporting venus encoder (and probably other drivers
>> in the future) which wants to map output type of buffers as
>> read/write.
>>
>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
>> ---
>> drivers/media/v4l2-core/videobuf2-core.c | 17 ++++++++---------
>> include/media/videobuf2-core.h | 13 +++++++++++++
>> 2 files changed, 21 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
>> index 0924594989b4..cb115ba6a1d2 100644
>> --- a/drivers/media/v4l2-core/videobuf2-core.c
>> +++ b/drivers/media/v4l2-core/videobuf2-core.c
>> @@ -194,8 +194,6 @@ static void __enqueue_in_driver(struct vb2_buffer *vb);
>> static int __vb2_buf_mem_alloc(struct vb2_buffer *vb)
>> {
>> struct vb2_queue *q = vb->vb2_queue;
>> - enum dma_data_direction dma_dir =
>> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
>> void *mem_priv;
>> int plane;
>> int ret = -ENOMEM;
>> @@ -209,7 +207,7 @@ static int __vb2_buf_mem_alloc(struct vb2_buffer *vb)
>>
>> mem_priv = call_ptr_memop(vb, alloc,
>> q->alloc_devs[plane] ? : q->dev,
>> - q->dma_attrs, size, dma_dir, q->gfp_flags);
>> + q->dma_attrs, size, q->dma_dir, q->gfp_flags);
>> if (IS_ERR_OR_NULL(mem_priv)) {
>> if (mem_priv)
>> ret = PTR_ERR(mem_priv);
>> @@ -978,8 +976,6 @@ static int __prepare_userptr(struct vb2_buffer *vb, const void *pb)
>> void *mem_priv;
>> unsigned int plane;
>> int ret = 0;
>> - enum dma_data_direction dma_dir =
>> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
>> bool reacquired = vb->planes[0].mem_priv == NULL;
>>
>> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);
>> @@ -1030,7 +1026,7 @@ static int __prepare_userptr(struct vb2_buffer *vb, const void *pb)
>> mem_priv = call_ptr_memop(vb, get_userptr,
>> q->alloc_devs[plane] ? : q->dev,
>> planes[plane].m.userptr,
>> - planes[plane].length, dma_dir);
>> + planes[plane].length, q->dma_dir);
>> if (IS_ERR(mem_priv)) {
>> dprintk(1, "failed acquiring userspace memory for plane %d\n",
>> plane);
>> @@ -1096,8 +1092,6 @@ static int __prepare_dmabuf(struct vb2_buffer *vb, const void *pb)
>> void *mem_priv;
>> unsigned int plane;
>> int ret = 0;
>> - enum dma_data_direction dma_dir =
>> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
>> bool reacquired = vb->planes[0].mem_priv == NULL;
>>
>> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);
>> @@ -1156,7 +1150,7 @@ static int __prepare_dmabuf(struct vb2_buffer *vb, const void *pb)
>> /* Acquire each plane's memory */
>> mem_priv = call_ptr_memop(vb, attach_dmabuf,
>> q->alloc_devs[plane] ? : q->dev,
>> - dbuf, planes[plane].length, dma_dir);
>> + dbuf, planes[plane].length, q->dma_dir);
>> if (IS_ERR(mem_priv)) {
>> dprintk(1, "failed to attach dmabuf\n");
>> ret = PTR_ERR(mem_priv);
>> @@ -2003,6 +1997,11 @@ int vb2_core_queue_init(struct vb2_queue *q)
>> if (q->buf_struct_size == 0)
>> q->buf_struct_size = sizeof(struct vb2_buffer);
>>
>> + if (q->bidirectional)
>> + q->dma_dir = DMA_BIDIRECTIONAL;
>> + else
>> + q->dma_dir = q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
>> +
>> return 0;
>> }
>> EXPORT_SYMBOL_GPL(vb2_core_queue_init);
>> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
>> index cb97c224be73..ede09fff1de8 100644
>> --- a/include/media/videobuf2-core.h
>> +++ b/include/media/videobuf2-core.h
>> @@ -427,6 +427,17 @@ struct vb2_buf_ops {
>> * @dev: device to use for the default allocation context if the driver
>> * doesn't fill in the @alloc_devs array.
>> * @dma_attrs: DMA attributes to use for the DMA.
>> + * @dma_dir: DMA mapping direction.
>
> This one should be moved to the 'Private elements' section. This is set and used
> by the vb2 core, drivers won't set this.
>
> Looks good otherwise.
>

Ah, correct, will fix that. Thanks!

--
regards,
Stan