[patch v4 3/3] doccumentation: jtag: Add bindings for Aspeed SoC 24xx and 25xx families JTAG master driver

From: Oleksandr Shamray
Date: Fri Aug 18 2017 - 05:49:49 EST


It has been tested on Mellanox system with BMC equipped with
Aspeed 2520 SoC for programming CPLD devices.

Signed-off-by: Oleksandr Shamray <oleksandrs@xxxxxxxxxxxx>
Signed-off-by: Jiri Pirko <jiri@xxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
V3->v4
Comments pointed by Rob Herring <robh@xxxxxxxxxx>
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file

v2->v3
Comments pointed by Rob Herring <robh@xxxxxxxxxx>
- split Aspeed jtag driver and binding to sepatrate patches
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file
---
.../devicetree/bindings/jtag/aspeed-jtag.txt | 18 ++++++++++++++++++
1 files changed, 18 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/jtag/aspeed-jtag.txt

diff --git a/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
new file mode 100644
index 0000000..f4ded49
--- /dev/null
+++ b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
@@ -0,0 +1,18 @@
+Aspeed JTAG driver for ast2400 and ast2500 SoC
+
+Required properties:
+- compatible: Should be one of
+ - "aspeed,aspeed2400-jtag"
+ - "aspeed,aspeed2500-jtag"
+- reg contains the offset and length of the JTAG memory
+ region
+- clocks root clock of bus, should reference the APB clock
+- interrupts should contain JTAG controller interrupt
+
+Example:
+jtag: jtag@1e6e4000 {
+ compatible = "aspeed,aspeed2500-jtag";
+ reg = <0x1e6e4000 0x1c>;
+ clocks = <&clk_apb>;
+ interrupts = <43>;
+};
--
1.7.1