Re: [PATCH v9 0/3] Add support for IPQ8074 PCIe phy and controller

From: Varadarajan Narayanan
Date: Fri Aug 18 2017 - 05:11:10 EST


On Fri, Aug 18, 2017 at 12:59:50PM +0530, Varadarajan Narayanan wrote:
> v9:
> Incorporate Stanimir's feedback for
> PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

Forgot to mention that the patches were rebased against
Bjorn's pci.git/next.

Thanks
Varada

> Add Stanimir's Ack for
> PCI: dwc: qcom: Use block IP version for operations
> PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
>
> Add Rob's Ack for
> dt-bindings: pci: qcom: Add support for IPQ8074
>
> v8:
> Incorporate Stanimir's feedback for
> PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
>
> v7:
> Skip PHY patches as they are already included by Kishon
>
> Incorporate Stanimir's feedback for the below patches
> PCI: dwc: qcom: Use block IP version for operations
> PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
>
> v6:
> Added 'Reviewed-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>' and fixed
> white space issues as mentioned by Vivek.
> phy: qcom-qmp: Fix phy pipe clock name
> dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
>
> v5:
> dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
> Renamed phy_phy clock as common clock
>
> phy: qcom-qmp: Fix phy pipe clock name
> Moved the DT get into the registering function
>
> phy: qcom-qmp: Add support for IPQ8074
> Place the IPQ8074 related structs similar to existing SoC.
> Renamed phy_phy clock as common clock
> v4:
> phy: qcom-qmp: Fix phy pipe clock name
> Based on Vivek's comments, return failure only for
> PCI/USB type of phys.
> Removed Ack.
>
> phy: qcom-qmp: Handle unavailable registers
> Removed this patch.
> Incorrectly used a block of code that is not applicable
> to IPQ8074, hence had to avoid an "unavailable" register.
> Since that is addressed using 'has_phy_com_ctrl' this
> patch is not needed.
>
> phy: qcom-qmp: Add support for IPQ8074
> Set 'has_phy_com_ctrl' to false
> Remove ipq8074_pciephy_regs_layout
>
> v3:
> PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> Incoporate Stan's feedback:-
> - Add SoC Wrapper and Synopsys Core IP versions
>
> v2:
> dt-bindings: phy: qmp: Add output-clock-names
> Added Rob H's Ack
>
> dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
> Removed example
> Added IPQ8074 specific details
>
> phy: qcom-qmp: Fix phy pipe clock name
> Added Vivek's Ack
>
> phy: qcom-qmp: Handle unavailable registers
> No changes
>
> phy: qcom-qmp: Add support for IPQ8074
> No changes
>
> PCI: dwc: qcom: Use block IP version for operations
> Added new patch to use block IP version instead of v1, v2...
>
> dt-bindings: pci: qcom: Add support for IPQ8074
> Removed example
> Added IPQ8074 specific details
>
> PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> Incorporated Bjorn's feedback:-
> - Removed reset names, helper function to assert/deassert, helper
> function to R/M/W register.
> - Renamed sys_noc clock as iface clock
> - Added deinit if phy power on fails
>
> v1:
> Add definitions required to enable QMP phy support for IPQ8074.
>
> Add support for the IPQ8074 PCIe controller. IPQ8074 supports
> Gen 1/2, one lane, two PCIe root complex with support for MSI and
> legacy interrupts, and it conforms to PCI Express Base 2.1
> specification.
>
> Varadarajan Narayanan (3):
> PCI: dwc: qcom: Use block IP version for operations
> dt-bindings: pci: qcom: Add support for IPQ8074
> PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
>
> .../devicetree/bindings/pci/qcom,pcie.txt | 23 ++
> drivers/pci/dwc/pcie-qcom.c | 346 +++++++++++++++++----
> 2 files changed, 302 insertions(+), 67 deletions(-)
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation