[PATCH v2 0/6] net: stmmac: Detect PHY location with phy-is-integrated

From: Corentin Labbe
Date: Thu Aug 17 2017 - 03:56:15 EST


Hello

The current way to find if the phy is internal is to compare DT phy-mode
and emac_variant/internal_phy.
But it will negate a possible future SoC where an external PHY use the
same phy mode than the integrated one.

This patchs series adds a new way to find if the PHY is integrated, via
the phy-is-integrated DT property.

Since it exists both integrated and external ethernet-phy@1, they are merged in
the final DTB and so share all properties.
For avoiding this, the phy-is-integrated is added only to board DT.

The first five patchs should go via the sunxi tree.
the last one should go via the net tree.
Note that this serie will need backporting the patch
"Documentation: net: phy: Add phy-is-integrated binding" which is in net-next

Thanks
Regards

Changes since v1:
- Dropped phy-is-integrated documentation patch since another same patch was already merged
- Moved phy-is-integrated from SoC dtsi to final board DT.

Corentin Labbe (6):
ARM: sun8i: orangepipc: Set phy-is-integrated to the internal phy node
ARM: sun8i: beelink-x2: Set phy-is-integrated to the internal phy node
ARM: sun8i: nanopi-neo: Set phy-is-integrated to the internal phy node
ARM: sun8i: orangepi-2: Set phy-is-integrated to the internal phy node
ARM: sun8i: orangepi-one: Set phy-is-integrated to the internal phy
node
net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated

arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 4 ++++
arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 4 ++++
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 4 ++++
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 4 ++++
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 4 ++++
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 16 ++++++++--------
6 files changed, 28 insertions(+), 8 deletions(-)

--
2.13.0