Re: [PATCH v4 4/6] perf: hisi: Add support for HiSilicon SoC HHA PMU driver

From: Mark Rutland
Date: Tue Aug 15 2017 - 07:06:35 EST


On Tue, Jul 25, 2017 at 08:10:40PM +0800, Shaokun Zhang wrote:
> +/* HHA register definition */
> +#define HHA_INT_MASK 0x0804
> +#define HHA_INT_STATUS 0x0808
> +#define HHA_INT_CLEAR 0x080C
> +#define HHA_PERF_CTRL 0x1E00
> +#define HHA_EVENT_CTRL 0x1E04
> +#define HHA_EVENT_TYPE0 0x1E80
> +#define HHA_CNT0_LOWER 0x1F00
> +
> +/* HHA has 16-counters and supports 0x50 events */

As with the L3C PMU, what exactly does this mean?

Does this mean event IDs 0-0x4f are valid?

[...]

> +static irqreturn_t hisi_hha_pmu_isr(int irq, void *dev_id)
> +{
> + struct hisi_pmu *hha_pmu = dev_id;
> + struct perf_event *event;
> + unsigned long overflown;
> + u32 status;
> + int idx;
> +
> + /* Read HHA_INT_STATUS register */
> + status = readl(hha_pmu->base + HHA_INT_STATUS);
> + if (!status)
> + return IRQ_NONE;
> + overflown = status;

No need for the u32 temporary here.

[....]

> +static int hisi_hha_pmu_dev_probe(struct platform_device *pdev,
> + struct hisi_pmu *hha_pmu)
> +{
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + ret = hisi_hha_pmu_init_data(pdev, hha_pmu);
> + if (ret)
> + return ret;
> +
> + /* Pick one core to use for cpumask attributes */
> + cpumask_set_cpu(smp_processor_id(), &hha_pmu->cpus);
> +

Why does this not have the usual event migration callbacks, across CPUs
in the same SCCL?

> + ret = hisi_hha_pmu_init_irq(hha_pmu, pdev);
> + if (ret)
> + return ret;
> +
> + hha_pmu->name = devm_kasprintf(dev, GFP_KERNEL, "hisi_hha%u_%u",
> + hha_pmu->hha_uid, hha_pmu->sccl_id);

As on the doc patch, this should be hierarchical.

Thanks,
Mark