[PATCH 1/3] ARM: dts: keystone-k2g: Add DSP node

From: Suman Anna
Date: Thu Aug 10 2017 - 19:54:01 EST


The Keystone 2 66AK2G SoC has a single TMS320C66x DSP Core
Subsystem (C66x CorePac), containing a C66x Fixed/Floating-Point
DSP Core, and 32 KB of L1P & L1D SRAMs and a 1 MB L2 SRAM. Add
the DT node for this DSP processor sub-system.

The DT node has a new property 'power-domains' and no 'clocks'
properties, and uses slightly different property values for
'resets' compared to other Keystone 2 SoCs. The processor does
not have an MMU, and uses various IPC Generation registers and
shared memory for inter-processor communication. The alias with
a stem 'rproc' has also been added for the DSP, it provides a
fixed remoteproc id for the DSP processor.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
Signed-off-by: Suman Anna <s-anna@xxxxxx>
---
arch/arm/boot/dts/keystone-k2g.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 35726b66fb91..826b286665e6 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -28,6 +28,7 @@

aliases {
serial0 = &uart0;
+ rproc0 = &dsp0;
};

cpus {
@@ -147,6 +148,22 @@
gpio,syscon-dev = <&devctrl 0x240>;
};

+ dsp0: dsp@10800000 {
+ compatible = "ti,k2g-dsp";
+ reg = <0x10800000 0x00100000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ power-domains = <&k2g_pds 0x0046>;
+ ti,syscon-dev = <&devctrl 0x844>;
+ resets = <&k2g_reset 0x0046 0x1>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
msgmgr: msgmgr@02a00000 {
compatible = "ti,k2g-message-manager";
#mbox-cells = <2>;
--
2.13.1