[PATCH v5 07/10] arm: dts: mt7623: enable the usb device on the mt7623n rfb

From: sean.wang
Date: Mon Jul 31 2017 - 03:38:13 EST


From: John Crispin <john@xxxxxxxxxxx>

All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.

Signed-off-by: John Crispin <john@xxxxxxxxxxx>
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 5e0dd79..1e95790 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -49,6 +49,15 @@
serial1 = &uart1;
serial2 = &uart2;
};
+
+ usb_p1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};

&uart0 {
@@ -72,3 +81,12 @@
vmmc-supply = <&mt6323_vmch_reg>;
vqmmc-supply = <&mt6323_vmc_reg>;
};
+
+&usb1 {
+ vbus-supply = <&usb_p1_vbus>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
--
2.7.4