Re: [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module

From: Auger Eric
Date: Sat Jul 29 2017 - 09:01:51 EST


Hi Anup,
On 20/07/2017 13:17, Anup Patel wrote:
> This patch adds Broadcom FlexRM low-level reset for
> VFIO platform.
>
> It will do the following:
> 1. Disable/Deactivate each FlexRM ring
> 2. Flush each FlexRM ring
>
> The cleanup sequence for FlexRM rings is adapted from
> Broadcom FlexRM mailbox driver.
>
> Signed-off-by: Anup Patel <anup.patel@xxxxxxxxxxxx>
> Reviewed-by: Oza Oza <oza.oza@xxxxxxxxxxxx>
> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
> ---
> drivers/vfio/platform/reset/Kconfig | 9 +++
> drivers/vfio/platform/reset/Makefile | 1 +
> .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 93 ++++++++++++++++++++++
> 3 files changed, 103 insertions(+)
> create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>
> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
> index 70cccc5..8d8d226 100644
> --- a/drivers/vfio/platform/reset/Kconfig
> +++ b/drivers/vfio/platform/reset/Kconfig
> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
> Enables the VFIO platform driver to handle reset for AMD XGBE
>
> If you don't know what to do here, say N.
> +
> +config VFIO_PLATFORM_BCMFLEXRM_RESET
> + tristate "VFIO support for Broadcom FlexRM reset"
> + depends on VFIO_PLATFORM
> + depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)?
> + help
> + Enables the VFIO platform driver to handle reset for Broadcom FlexRM
> +
> + If you don't know what to do here, say N.
> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
> index 93f4e23..8d9874b 100644
> --- a/drivers/vfio/platform/reset/Makefile
> +++ b/drivers/vfio/platform/reset/Makefile
> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>
> obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
> obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> new file mode 100644
> index 0000000..a198196
> --- /dev/null
> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> @@ -0,0 +1,93 @@
> +/*
> + * Copyright (C) 2017 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/*
> + * This driver provides reset support for Broadcom FlexRM ring manager
> + * to VFIO platform.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include "vfio_platform_private.h"
> +
> +/* FlexRM configuration */
> +#define RING_REGS_SIZE 0x10000
> +#define RING_VER_MAGIC 0x76303031
> +
> +/* Per-Ring register offsets */
> +#define RING_VER 0x000
> +#define RING_CONTROL 0x034
> +#define RING_FLUSH_DONE 0x038
> +
> +/* Register RING_CONTROL fields */
> +#define CONTROL_FLUSH_SHIFT 5
> +#define CONTROL_ACTIVE_SHIFT 4
not used
> +
> +/* Register RING_FLUSH_DONE fields */
> +#define FLUSH_DONE_MASK 0x1
> +
> +static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
> +{
> + unsigned int timeout;
> +
> + /* Disable/inactivate ring */
> + writel_relaxed(0x0, ring + RING_CONTROL);
> +
> + /* Flush ring with timeout of 1s */
> + timeout = 1000;
> + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
> + do {
> + if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
> + break;
> + mdelay(1);
> + } while (timeout--);
> +
> + if (!timeout)
> + pr_warn("VFIO FlexRM shutdown timedout\n");
s/timedout/timeout

vfio_platform_bcmflexrm_shutdown may also return an error that would be
propagated to the called:
vfio_platform_release() would then emit a dev_warn + WARN_ON. your
choice - I know this is not done in amdxge reset function ;-) -.


Comparing to the drivers/mailbox/bcm-flexrm-mailbox.c flexrm_shutdown()
there is one section missing commented as "Abort all in-flight
requests". I understand there is no HW adherence of this section but I
just want to double check that after disabling and flush the ring as
above you guarantee there is no more DMA accesses likely to happen and
also no platform MSI can be triggered by the HW.

Otherwise looks good to me
Reviewed-by: Eric Auger <eric.auger@xxxxxxxxxx>

For my curiosity do you intend to do a QEMU integration of this device?

Thanks

Eric
> +}
> +
> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
> +{
> + void __iomem *ring;
> + struct vfio_platform_region *reg = &vdev->regions[0];
> +
> + /* Map FlexRM ring registers if not mapped */
> + if (!reg->ioaddr) {
> + reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
> + if (!reg->ioaddr)
> + return -ENOMEM;
> + }
> +
> + /* Discover and shutdown each FlexRM ring */
> + for (ring = reg->ioaddr;
> + ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
> + if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
> + vfio_platform_bcmflexrm_shutdown(ring);
> + }
> +
> + return 0;
> +}
> +
> +module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
> + vfio_platform_bcmflexrm_reset);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Anup Patel <anup.patel@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
>