Re: [PATCH v3 0/2] media: Add Amlogic Meson AO CEC Controller support

From: Hans Verkuil
Date: Fri Jul 28 2017 - 08:37:27 EST


On 07/28/2017 02:35 PM, Hans Verkuil wrote:
> Hi Neil,
>
> On 07/27/2017 05:20 PM, Neil Armstrong wrote:
>> The Amlogic SoC embeds a standalone CEC controller, this patch adds a driver
>> for such controller.
>> The controller does not need HPD to be active, and could support up to max
>> 5 logical addresses, but only 1 is handled since the Suspend firmware can
>> make use of this unique logical address to wake up the device.
>>
>> The Suspend firmware configuration will be added in an other patchset.
>
> Note that to get the right module dependencies you will also need to add
> this line:
>
> select CEC_CORE if CEC_NOTIFIER
>
> to DRM_MESON_DW_HDMI in drivers/gpu/drm/meson/Kconfig.
>
> This ensures that if DRM_MESON_DW_HDMI is 'y' but VIDEO_MESON_AO_CEC is 'm'
> the CEC_CORE config is set to 'y'.
>
> Obviously this is a patch for dri-devel.

I was too quick sending this: I expect this line to appear in DRM_DW_HDMI,
not DRM_MESON_DW_HDMI. Sorry about the noise.

Hans

>
> Regards,
>
> Hans
>
>>
>> Changes since v2 at [2] :
>> - change meson_ao_cec_read/write prototype to simplify error handling
>>
>> Changes since v1 at [1] :
>> - add timeout to wait busy, with error return
>> - handle busy error in all read/write operations
>> - add CEC_CAP_PASSTHROUGH
>> - add bindings ack
>>
>> [1] https://lkml.kernel.org/r/1499336870-24118-1-git-send-email-narmstrong@xxxxxxxxxxxx
>> [2] https://lkml.kernel.org/r/1499673696-21372-1-git-send-email-narmstrong@xxxxxxxxxxxx
>>
>> Neil Armstrong (2):
>> platform: Add Amlogic Meson AO CEC Controller driver
>> dt-bindings: media: Add Amlogic Meson AO-CEC bindings
>>
>> .../devicetree/bindings/media/meson-ao-cec.txt | 28 +
>> drivers/media/platform/Kconfig | 11 +
>> drivers/media/platform/Makefile | 2 +
>> drivers/media/platform/meson/Makefile | 1 +
>> drivers/media/platform/meson/ao-cec.c | 744 +++++++++++++++++++++
>> 5 files changed, 786 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/meson-ao-cec.txt
>> create mode 100644 drivers/media/platform/meson/Makefile
>> create mode 100644 drivers/media/platform/meson/ao-cec.c
>>
>