[PATCH 06/13] net: dsa: lan9303: added sysfs node swe_bcst_throt

From: Egil Hjelmeland
Date: Mon Jul 24 2017 - 11:43:25 EST


Allowing per-port access to Switch Engine Broadcast Throttling Register

Also added lan9303_write_switch_reg_mask()

Signed-off-by: Egil Hjelmeland <egil.hjelmeland@xxxxxxxxxxx>
---
drivers/net/dsa/lan9303-core.c | 83 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index be6d78f45a5f..b70acb73aad6 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -154,6 +154,7 @@
# define LAN9303_SWE_PORT_MIRROR_ENABLE_RX_MIRRORING BIT(1)
# define LAN9303_SWE_PORT_MIRROR_ENABLE_TX_MIRRORING BIT(0)
#define LAN9303_SWE_INGRESS_PORT_TYPE 0x1847
+#define LAN9303_SWE_BCST_THROT 0x1848
#define LAN9303_BM_CFG 0x1c00
#define LAN9303_BM_EGRSS_PORT_TYPE 0x1c0c
# define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT2 (BIT(17) | BIT(16))
@@ -426,6 +427,20 @@ static int lan9303_read_switch_reg(struct lan9303 *chip, u16 regnum, u32 *val)
return ret;
}

+static int lan9303_write_switch_reg_mask(
+ struct lan9303 *chip, u16 regnum, u32 val, u32 mask)
+{
+ int ret;
+ u32 reg;
+
+ ret = lan9303_read_switch_reg(chip, regnum, &reg);
+ if (ret)
+ return ret;
+ reg = (reg & ~mask) | val;
+
+ return lan9303_write_switch_reg(chip, regnum, reg);
+}
+
static int lan9303_detect_phy_setup(struct lan9303 *chip)
{
int reg;
@@ -614,6 +629,66 @@ static int lan9303_check_device(struct lan9303 *chip)
return 0;
}

+/* ---------------------- Sysfs on slave port --------------------------*/
+/*13.4.3.23 Switch Engine Broadcast Throttling Register (SWE_BCST_THROT)*/
+static ssize_t
+swe_bcst_throt_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dsa_port *dp = dsa_net_device_to_dsa_port(to_net_dev(dev));
+ struct lan9303 *chip = dp->ds->priv;
+ int port = dp->index;
+ int reg;
+
+ if (lan9303_read_switch_reg(chip, LAN9303_SWE_BCST_THROT, &reg))
+ return 0;
+
+ reg = (reg >> (9 * port)) & 0x1ff; /*extract port N*/
+ if (reg & 0x100)
+ reg &= 0xff; /* remove enable bit */
+ else
+ reg = 0; /* not enabled*/
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", reg);
+}
+
+static ssize_t
+swe_bcst_throt_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct dsa_port *dp = dsa_net_device_to_dsa_port(to_net_dev(dev));
+ struct lan9303 *chip = dp->ds->priv;
+ int port = dp->index;
+ int ret;
+ unsigned long level;
+
+ ret = kstrtoul(buf, 0, &level);
+ if (ret)
+ return ret;
+ level &= 0xff; /* ensure valid range */
+ if (level)
+ level |= 0x100; /* Set enable bit */
+
+ ret = lan9303_write_switch_reg_mask(chip, LAN9303_SWE_BCST_THROT,
+ level << (9 * port),
+ 0x1ff << (9 * port));
+ if (ret)
+ return ret;
+ return len;
+}
+
+static DEVICE_ATTR_RW(swe_bcst_throt);
+
+static struct attribute *lan9303_attrs[] = {
+ &dev_attr_swe_bcst_throt.attr,
+ NULL
+};
+
+static struct attribute_group lan9303_group = {
+ .name = "lan9303",
+ .attrs = lan9303_attrs,
+};
+
/* ---------------------------- DSA -----------------------------------*/

static enum dsa_tag_protocol lan9303_get_tag_protocol(struct dsa_switch *ds)
@@ -787,6 +862,11 @@ static int lan9303_port_enable(struct dsa_switch *ds, int port,
switch (port) {
case 1:
case 2:
+ /* lan9303_setup is too early to attach sysfs nodes... */
+ if (sysfs_create_group(
+ &ds->ports[port].netdev->dev.kobj,
+ &lan9303_group))
+ dev_dbg(chip->dev, "cannot create sysfs group\n");
return lan9303_enable_packet_processing(chip, port);
default:
dev_dbg(chip->dev,
@@ -805,6 +885,9 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port,
switch (port) {
case 1:
case 2:
+ sysfs_remove_group(&ds->ports[port].netdev->dev.kobj,
+ &lan9303_group);
+
lan9303_disable_packet_processing(chip, port);
lan9303_phy_write(ds, chip->phy_addr_sel_strap + port,
MII_BMCR, BMCR_PDOWN);
--
2.11.0


DISCLAIMER:
This e-mail may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply e-mail and delete all copies of this message.