[PATCH 11/11] ARM: dts: sun8i: a83t: h8homlet: Enable micro-SD card and onboard eMMC

From: Chen-Yu Tsai
Date: Fri Jul 14 2017 - 02:43:39 EST


The H8 homlet has a micro-SD card slot connected to mmc0,
and onboard eMMC from FORESEE, connected to mmc2.

Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
.../boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index aecdeeb368ed..7afbaa4eea8d 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -43,6 +43,7 @@

/dts-v1/;
#include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"

/ {
model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
@@ -57,6 +58,26 @@
};
};

+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_vcc3v0>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ bus-width = <4>;
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ vmmc-supply = <&reg_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
--
2.13.2