[PATCH v2 2/2] dt-bindings: media: Add Amlogic Meson AO-CEC bindings

From: Neil Armstrong
Date: Mon Jul 10 2017 - 04:02:24 EST


The Amlogic SoCs embeds a standalone CEC Controller, this patch adds this
device bindings.

Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
.../devicetree/bindings/media/meson-ao-cec.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/meson-ao-cec.txt

diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
new file mode 100644
index 0000000..8671bdb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
@@ -0,0 +1,28 @@
+* Amlogic Meson AO-CEC driver
+
+The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
+to handle communication between HDMI connected devices over the CEC bus.
+
+Required properties:
+ - compatible : value should be following
+ "amlogic,meson-gx-ao-cec"
+
+ - reg : Physical base address of the IP registers and length of memory
+ mapped region.
+
+ - interrupts : AO-CEC interrupt number to the CPU.
+ - clocks : from common clock binding: handle to AO-CEC clock.
+ - clock-names : from common clock binding: must contain "core",
+ corresponding to entry in the clocks property.
+ - hdmi-phandle: phandle to the HDMI controller
+
+Example:
+
+cec_AO: cec@100 {
+ compatible = "amlogic,meson-gx-ao-cec";
+ reg = <0x0 0x00100 0x0 0x14>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+ clock-names = "core";
+ hdmi-phandle = <&hdmi_tx>;
+};
--
1.9.1