Re: [PATCH 2/2] power: supply: sbs-battery: Don't needlessly set CAPACITY_MODE

From: Guenter Roeck
Date: Tue Jun 13 2017 - 14:17:57 EST


On Tue, Jun 13, 2017 at 10:53 AM, Shawn Nematbakhsh <shawnn@xxxxxxxxxxxx> wrote:
> According to the smart battery spec (1), the CAPACITY_MODE bit does not
> influence the value read from RelativeStateOfCharge(), so don't bother
> changing CAPACITY_MODE when doing such a read.
>
> (1) - Smart Battery Data Specification, Rev 1.1, Dec. 11, 1998
>
> Signed-off-by: Shawn Nematbakhsh <shawnn@xxxxxxxxxxxx>

Reviewed-by: Guenter Roeck <groeck@xxxxxxxxxxxx>

> ---
> drivers/power/supply/sbs-battery.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
> index d7e68fd97099..4bae210d5a8a 100644
> --- a/drivers/power/supply/sbs-battery.c
> +++ b/drivers/power/supply/sbs-battery.c
> @@ -439,6 +439,11 @@ static int sbs_get_battery_property(struct i2c_client *client,
> } else {
> if (psp == POWER_SUPPLY_PROP_STATUS)
> val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> + else if (psp == POWER_SUPPLY_PROP_CAPACITY)
> + /* sbs spec says that this can be >100 %
> + * even if max value is 100 %
> + */
> + val->intval = min(ret, 100);
> else
> val->intval = 0;
> }
> @@ -549,12 +554,7 @@ static int sbs_get_battery_capacity(struct i2c_client *client,
> if (ret < 0)
> return ret;
>
> - if (psp == POWER_SUPPLY_PROP_CAPACITY) {
> - /* sbs spec says that this can be >100 %
> - * even if max value is 100 % */
> - val->intval = min(ret, 100);
> - } else
> - val->intval = ret;
> + val->intval = ret;
>
> ret = sbs_set_battery_mode(client, mode);
> if (ret < 0)
> @@ -619,7 +619,6 @@ static int sbs_get_property(struct power_supply *psy,
> case POWER_SUPPLY_PROP_CHARGE_NOW:
> case POWER_SUPPLY_PROP_CHARGE_FULL:
> case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> - case POWER_SUPPLY_PROP_CAPACITY:
> ret = sbs_get_property_index(client, psp);
> if (ret < 0)
> break;
> @@ -647,6 +646,7 @@ static int sbs_get_property(struct power_supply *psy,
> case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
> case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> + case POWER_SUPPLY_PROP_CAPACITY:
> ret = sbs_get_property_index(client, psp);
> if (ret < 0)
> break;
> --
> 2.13.1.508.gb3defc5cc-goog
>