Re: [PATCH] mfd: intel_soc_pmic: use 'depends on' instead of 'select'

[Andy Shevchenko]

On Fri, 2017-06-09 at 13:31 +0200, Hans de Goede wrote:
> Hi,
> 
> On 09-06-17 12:44, Arnd Bergmann wrote:
> > I ran into a build error on ARM with a platform that has a non-
> > standard
> > clk implementation:
> > 
> > drivers/clk/clk.o: In function `clk_disable':
> > clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable'
> > arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first
> > defined here
> > drivers/clk/clk.o: In function `clk_enable':
> > clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable'
> > arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first
> > defined here
> > 
> > The problem is a device driver that uses 'select COMMON_CLK', which
> > is
> > generally a bad idea: selecting a subsystem should only be done from
> > a platform, otherwise we run into circular dependencies. The same
> > driver
> > also selects 'GPIOLIB' and 'I2C', which has a similar effect.
> > 
> > This turns all three into 'depends on', as it should be. The same
> > pattern
> > exists for INTEL_SOC_PMIC and INTEL_SOC_PMIC_CHTWC, so we fix both
> > the
> > same way to keep them in sync. INTEL_SOC_PMIC does not depend on
> > ACPI,
> > so we don't need to 'select' the I2C master driver when ACPI is
> > disabled.
> > 
> > Finally, we can limit the build to x86, unless we are compile
> > testing.
> > 
> > Fixes: 2f91ded5f8f4 ("mfd: Add Cherry Trail Whiskey Cove PMIC
> > driver")
> > Fixes: 5f125f1f5705 ("mfd: intel_soc_pmic: Select designware i2c-bus 
> > driver")
> > Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> 
> Looks good to me:
> 
> Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx>

No objections if it works for Hans' case.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

> 
> Regards,
> 
> Hans
> 
> 
> 
> > ---
> > Â drivers/mfd/Kconfig | 15 ++++++---------
> > Â 1 file changed, 6 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index ea5daa935518..74fa52582f06 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -454,14 +454,12 @@ config LPC_SCH
> > ÂÂ
> > Â config INTEL_SOC_PMIC
> > ÂÂ	bool "Support for Crystal Cove PMIC"
> > -	depends on HAS_IOMEM
> > -	select GPIOLIB
> > -	select I2C
> > +	depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
> > +	depends on X86 || COMPILE_TEST
> > ÂÂ	select MFD_CORE
> > ÂÂ	select REGMAP_I2C
> > ÂÂ	select REGMAP_IRQ
> > -	select COMMON_CLK
> > -	select I2C_DESIGNWARE_PLATFORM
> > +	select I2C_DESIGNWARE_PLATFORM if ACPI
> > ÂÂ	help
> > ÂÂ	ÂÂSelect this option to enable support for Crystal Cove
> > PMIC
> > ÂÂ	ÂÂon some Intel SoC systems. The PMIC provides ADC, GPIO,
> > @@ -484,13 +482,12 @@ config INTEL_SOC_PMIC_BXTWC
> > ÂÂ	ÂÂon these systems.
> > ÂÂ
> > Â config INTEL_SOC_PMIC_CHTWC
> > -	bool "Support for Intel Cherry Trail Whiskey Cove PMIC"
> > -	depends on ACPI && HAS_IOMEM
> > +	tristate "Support for Intel Cherry Trail Whiskey Cove PMIC"
> > +	depends on ACPI && HAS_IOMEM && I2C=y && COMMON_CLK
> > +	depends on X86 || COMPILE_TEST
> > ÂÂ	select MFD_CORE
> > -	select I2C
> > ÂÂ	select REGMAP_I2C
> > ÂÂ	select REGMAP_IRQ
> > -	select COMMON_CLK
> > ÂÂ	select I2C_DESIGNWARE_PLATFORM
> > ÂÂ	help
> > ÂÂ	ÂÂSelect this option to enable support for the Intel
> > Cherry Trail
> > 

-- 
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy