[PATCH] mfd: intel_soc_pmic: use 'depends on' instead of 'select'

[Arnd Bergmann]

I ran into a build error on ARM with a platform that has a non-standard
clk implementation:

drivers/clk/clk.o: In function `clk_disable':
clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable'
arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first defined here
drivers/clk/clk.o: In function `clk_enable':
clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable'
arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first defined here

The problem is a device driver that uses 'select COMMON_CLK', which is
generally a bad idea: selecting a subsystem should only be done from
a platform, otherwise we run into circular dependencies. The same driver
also selects 'GPIOLIB' and 'I2C', which has a similar effect.

This turns all three into 'depends on', as it should be. The same pattern
exists for INTEL_SOC_PMIC and INTEL_SOC_PMIC_CHTWC, so we fix both the
same way to keep them in sync. INTEL_SOC_PMIC does not depend on ACPI,
so we don't need to 'select' the I2C master driver when ACPI is disabled.

Finally, we can limit the build to x86, unless we are compile testing.

Fixes: 2f91ded5f8f4 ("mfd: Add Cherry Trail Whiskey Cove PMIC driver")
Fixes: 5f125f1f5705 ("mfd: intel_soc_pmic: Select designware i2c-bus driver")
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 drivers/mfd/Kconfig | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ea5daa935518..74fa52582f06 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -454,14 +454,12 @@ config LPC_SCH
 
 config INTEL_SOC_PMIC
 	bool "Support for Crystal Cove PMIC"
-	depends on HAS_IOMEM
-	select GPIOLIB
-	select I2C
+	depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
+	depends on X86 || COMPILE_TEST
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	select COMMON_CLK
-	select I2C_DESIGNWARE_PLATFORM
+	select I2C_DESIGNWARE_PLATFORM if ACPI
 	help
 	  Select this option to enable support for Crystal Cove PMIC
 	  on some Intel SoC systems. The PMIC provides ADC, GPIO,
@@ -484,13 +482,12 @@ config INTEL_SOC_PMIC_BXTWC
 	  on these systems.
 
 config INTEL_SOC_PMIC_CHTWC
-	bool "Support for Intel Cherry Trail Whiskey Cove PMIC"
-	depends on ACPI && HAS_IOMEM
+	tristate "Support for Intel Cherry Trail Whiskey Cove PMIC"
+	depends on ACPI && HAS_IOMEM && I2C=y && COMMON_CLK
+	depends on X86 || COMPILE_TEST
 	select MFD_CORE
-	select I2C
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	select COMMON_CLK
 	select I2C_DESIGNWARE_PLATFORM
 	help
 	  Select this option to enable support for the Intel Cherry Trail
-- 
2.9.0