Re: [PATCH v4 2/2] PCI: Add tango PCIe host bridge support

From: Mason
Date: Thu May 25 2017 - 08:01:17 EST


On 25/05/2017 10:48, Marc Zyngier wrote:

> On 20/04/17 15:31, Marc Gonzalez wrote:
>
>> This driver is required to work around several hardware bugs in the
>> PCIe controller.
>>
>> NB: Revision 1 does not support legacy interrupts, or IO space.
>>
>> Signed-off-by: Marc Gonzalez <marc_gonzalez@xxxxxxxxxxxxxxxx>
>> ---
>> Documentation/devicetree/bindings/pci/tango-pcie.txt | 32 ++++++++
>> drivers/pci/host/Kconfig | 8 ++
>> drivers/pci/host/Makefile | 1 +
>> drivers/pci/host/pcie-tango.c | 161 +++++++++++++++++++++++++++++++++++++++
>> include/linux/pci_ids.h | 2 +
>> 5 files changed, 204 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/tango-pcie.txt b/Documentation/devicetree/bindings/pci/tango-pcie.txt
>> new file mode 100644
>> index 000000000000..3353b4e77309
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/tango-pcie.txt
>> @@ -0,0 +1,32 @@
>> +Sigma Designs Tango PCIe controller
>> +
>> +Required properties:
>> +
>> +- compatible: "sigma,smp8759-pcie"
>> +- reg: address/size of PCI configuration space, address/size of register area
>> +- device_type: "pci"
>> +- #size-cells: <2>
>> +- #address-cells: <3>
>> +- #interrupt-cells: <1>
>
> What is the point of having an #interrupt-cells when this is *not* an
> interrupt controller (as it doesn't support legacy interrupts)?

My mistake.

Thanks for kindly pointing out that the #interrupt-cells property
is not needed when a controller doesn't support legacy interrupts.

If a controller does support legacy interrupts, then I see other
bindings define #interrupt-cells and interrupt-map.
Is interrupt-controller also required?
Is that redundant with msi-controller?

(Rev2 will support legacy interrupts.)

References for my own information:
http://elixir.free-electrons.com/linux/latest/source/Documentation/devicetree/bindings/pci/host-generic-pci.txt
http://elixir.free-electrons.com/linux/latest/source/Documentation/devicetree/bindings/pci/altera-pcie.txt
http://elinux.org/Device_Tree_Usage#Advanced_Interrupt_Mapping

> As mentioned earlier, this needs to be a separate patch to be reviewed
> by the Keepers of the Faith (aka the DT maintainers).

robh already acked v3 two months ago, but can split it up,
and CC the DT folks for v5.

>> +static int smp8759_init(struct tango_pcie *pcie, void __iomem *base)
>> +{
>> + pcie->mux = base + 0x48;
>> + pcie->msi_status = base + 0x80;
>> + pcie->msi_enable = base + 0xa0;
>> + pcie->msi_doorbell = 0xa0000000 + 0x2e07c;
>> +
>> + return tango_check_pcie_link(base + 0x74);
>
> Please have some defines for these magic values.

Typical driver do
#define MUX_OFFSET 0x48
and then access the register's value through
readl_relaxed(pcie->base + MUX_OFFSET);

I can't do that because the registers were shuffled around
between revision 1 and revision 2. Thus, instead of an
explicitly-named macro (MUX_OFFSET), I used an explicitly-
named field (pcie->mux) and access the register's value
through readl_relaxed(pcie->mux);

This is equivalent to providing the offset definitions in the
init functions, instead of at the top of the file.

Regards.