Re: [PATCH RESEND v2] tpm: Apply a sane minimum adapterlimit value for retransmission.

From: Jarkko Sakkinen
Date: Wed May 24 2017 - 14:51:19 EST


On Mon, May 22, 2017 at 11:16:38AM +0200, Enric Balletbo i Serra wrote:
> From: Bryan Freed <bfreed@xxxxxxxxxxxx>
>
> When the I2C Infineon part is attached to an I2C adapter that imposes
> a size limitation, large requests will fail with -EOPNOTSUPP. Retry
> them with a sane minimum size without re-issuing the 0x05 command
> as this appears to occasionally put the TPM in a bad state.
>
> Signed-off-by: Bryan Freed <bfreed@xxxxxxxxxxxx>
> [rework the patch to adapt to the feedback received]
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> Acked-by: Andrew Lunn <andrew@xxxxxxx>
> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
> ---
> The purpose of this resend is only a reminder for if this can be accepted
> for the next merge window as I missed last merge. Thanks.

I'm sorry about this. Yes it can.

/Jarkko

>
> drivers/char/tpm/tpm_i2c_infineon.c | 76 +++++++++++++++++++++++++++----------
> 1 file changed, 56 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_i2c_infineon.c b/drivers/char/tpm/tpm_i2c_infineon.c
> index dc47fa2..79d6bbb 100644
> --- a/drivers/char/tpm/tpm_i2c_infineon.c
> +++ b/drivers/char/tpm/tpm_i2c_infineon.c
> @@ -70,6 +70,7 @@ struct tpm_inf_dev {
> u8 buf[TPM_BUFSIZE + sizeof(u8)]; /* max. buffer size + addr */
> struct tpm_chip *chip;
> enum i2c_chip_type chip_type;
> + unsigned int adapterlimit;
> };
>
> static struct tpm_inf_dev tpm_dev;
> @@ -111,6 +112,7 @@ static int iic_tpm_read(u8 addr, u8 *buffer, size_t len)
>
> int rc = 0;
> int count;
> + unsigned int msglen = len;
>
> /* Lock the adapter for the duration of the whole sequence. */
> if (!tpm_dev.client->adapter->algo->master_xfer)
> @@ -131,27 +133,61 @@ static int iic_tpm_read(u8 addr, u8 *buffer, size_t len)
> usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI);
> }
> } else {
> - /* slb9635 protocol should work in all cases */
> - for (count = 0; count < MAX_COUNT; count++) {
> - rc = __i2c_transfer(tpm_dev.client->adapter, &msg1, 1);
> - if (rc > 0)
> - break; /* break here to skip sleep */
> -
> - usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI);
> - }
> -
> - if (rc <= 0)
> - goto out;
> -
> - /* After the TPM has successfully received the register address
> - * it needs some time, thus we're sleeping here again, before
> - * retrieving the data
> + /* Expect to send one command message and one data message, but
> + * support looping over each or both if necessary.
> */
> - for (count = 0; count < MAX_COUNT; count++) {
> - usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI);
> - rc = __i2c_transfer(tpm_dev.client->adapter, &msg2, 1);
> - if (rc > 0)
> - break;
> + while (len > 0) {
> + /* slb9635 protocol should work in all cases */
> + for (count = 0; count < MAX_COUNT; count++) {
> + rc = __i2c_transfer(tpm_dev.client->adapter,
> + &msg1, 1);
> + if (rc > 0)
> + break; /* break here to skip sleep */
> +
> + usleep_range(SLEEP_DURATION_LOW,
> + SLEEP_DURATION_HI);
> + }
> +
> + if (rc <= 0)
> + goto out;
> +
> + /* After the TPM has successfully received the register
> + * address it needs some time, thus we're sleeping here
> + * again, before retrieving the data
> + */
> + for (count = 0; count < MAX_COUNT; count++) {
> + if (tpm_dev.adapterlimit) {
> + msglen = min_t(unsigned int,
> + tpm_dev.adapterlimit,
> + len);
> + msg2.len = msglen;
> + }
> + usleep_range(SLEEP_DURATION_LOW,
> + SLEEP_DURATION_HI);
> + rc = __i2c_transfer(tpm_dev.client->adapter,
> + &msg2, 1);
> + if (rc > 0) {
> + /* Since len is unsigned, make doubly
> + * sure we do not underflow it.
> + */
> + if (msglen > len)
> + len = 0;
> + else
> + len -= msglen;
> + msg2.buf += msglen;
> + break;
> + }
> + /* If the I2C adapter rejected the request (e.g
> + * when the quirk read_max_len < len) fall back
> + * to a sane minimum value and try again.
> + */
> + if (rc == -EOPNOTSUPP)
> + tpm_dev.adapterlimit =
> + I2C_SMBUS_BLOCK_MAX;
> + }
> +
> + if (rc <= 0)
> + goto out;
> }
> }
>
> --
> 2.9.3
>