Re: [PATCH v3 2/4] hwmon: (adt7475) fan stall prevention

From: Guenter Roeck
Date: Sun May 14 2017 - 10:54:52 EST


On 05/10/2017 08:45 PM, Chris Packham wrote:
By default adt7475 will stop the fans (pwm duty cycle 0%) when the
temperature drops past Tmin - hysteresis. Some systems want to keep the
fans moving even when the temperature drops so add new sysfs attributes
that configure the enhanced acoustics min 1-3 which allows the fans to
run at the minimum configure pwm duty cycle.

Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---

Changes in v2:
- use pwmN_stall_dis as the attribute name. I think this describes the purpose
pretty well. I went with a new attribute instead of overloading

Almost agree. Can we use pwmN_stall_disable ?

Thanks,
Guenter


pwmN_auto_point1_pwm so this doesn't affect existing users.
Changes in v3:
- Fix grammar.
- change enh_acou to enh_acoustics

Documentation/hwmon/adt7475 | 5 +++++
drivers/hwmon/adt7475.c | 50 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)

diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
index 0502f2b464e1..3990bae60e78 100644
--- a/Documentation/hwmon/adt7475
+++ b/Documentation/hwmon/adt7475
@@ -109,6 +109,11 @@ fan speed) is applied. PWM values range from 0 (off) to 255 (full speed).
Fan speed may be set to maximum when the temperature sensor associated with
the PWM control exceeds temp#_max.

+At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the
+minimum (i.e. auto_point1_pwm). This behaviour can be configured using the
+pwm[1-*]_stall_dis sysfs attribute. A value of 0 means the fans will shut off.
+A value of 1 means the fans will run at auto_point1_pwm.
+
Notes
-----

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index ec0c43fbcdce..4d6c625fec70 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -79,6 +79,9 @@

#define REG_TEMP_TRANGE_BASE 0x5F

+#define REG_ENHANCE_ACOUSTICS1 0x62
+#define REG_ENHANCE_ACOUSTICS2 0x63
+
#define REG_PWM_MIN_BASE 0x64

#define REG_TEMP_TMIN_BASE 0x67
@@ -209,6 +212,7 @@ struct adt7475_data {
u8 range[3];
u8 pwmctl[3];
u8 pwmchan[3];
+ u8 enh_acoustics[2];

u8 vid;
u8 vrm;
@@ -700,6 +704,43 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
data->pwm[sattr->nr][sattr->index] = clamp_val(val, 0, 0xFF);
i2c_smbus_write_byte_data(client, reg,
data->pwm[sattr->nr][sattr->index]);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+
+static ssize_t show_stall_dis(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ u8 mask = BIT(5 + sattr->index);
+
+ return sprintf(buf, "%d\n", !!(data->enh_acoustics[0] & mask));
+}
+
+static ssize_t set_stall_dis(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ long val;
+ u8 mask = BIT(5 + sattr->index);
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ data->enh_acoustics[0] &= ~mask;
+ if (val)
+ data->enh_acoustics[0] |= mask;
+
+ i2c_smbus_write_byte_data(client, REG_ENHANCE_ACOUSTICS1,
+ data->enh_acoustics[0]);

mutex_unlock(&data->lock);

@@ -1028,6 +1069,8 @@ static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MIN, 0);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_stall_dis, S_IRUGO | S_IWUSR, show_stall_dis,
+ set_stall_dis, 0, 0);
static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
1);
static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
@@ -1040,6 +1083,8 @@ static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MIN, 1);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_stall_dis, S_IRUGO | S_IWUSR, show_stall_dis,
+ set_stall_dis, 0, 1);
static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
2);
static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
@@ -1052,6 +1097,8 @@ static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MIN, 2);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MAX, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_stall_dis, S_IRUGO | S_IWUSR, show_stall_dis,
+ set_stall_dis, 0, 2);

/* Non-standard name, might need revisiting */
static DEVICE_ATTR_RW(pwm_use_point2_pwm_at_crit);
@@ -1112,12 +1159,14 @@ static struct attribute *adt7475_attrs[] = {
&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_stall_dis.dev_attr.attr,
&sensor_dev_attr_pwm3.dev_attr.attr,
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_stall_dis.dev_attr.attr,
&dev_attr_pwm_use_point2_pwm_at_crit.attr,
NULL,
};
@@ -1136,6 +1185,7 @@ static struct attribute *pwm2_attrs[] = {
&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_stall_dis.dev_attr.attr,
NULL
};