[PATCH 4/5] mtd: adjust kernel-docs to avoid Sphinx/kerneldoc warnings

From: Mauro Carvalho Chehab
Date: Sat May 13 2017 - 07:11:16 EST


./drivers/mtd/nand/nand_bbt.c:1: warning: no structured comments found
./include/linux/mtd/nand.h:785: ERROR: Unexpected indentation.
./drivers/mtd/nand/nand_base.c:449: WARNING: Definition list ends without a blank line; unexpected unindent.
./drivers/mtd/nand/nand_base.c:1161: ERROR: Unexpected indentation.
./drivers/mtd/nand/nand_base.c:1162: WARNING: Block quote ends without a blank line; unexpected unindent.

Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
Documentation/driver-api/mtdnand.rst | 3 ---
drivers/mtd/nand/nand_base.c | 7 +++++--
include/linux/mtd/nand.h | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/driver-api/mtdnand.rst b/Documentation/driver-api/mtdnand.rst
index e670f8b15a79..4fe3bf00299b 100644
--- a/Documentation/driver-api/mtdnand.rst
+++ b/Documentation/driver-api/mtdnand.rst
@@ -970,9 +970,6 @@ hints" for an explanation.
.. kernel-doc:: drivers/mtd/nand/nand_base.c
:export:

-.. kernel-doc:: drivers/mtd/nand/nand_bbt.c
- :export:
-
.. kernel-doc:: drivers/mtd/nand/nand_ecc.c
:export:

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index b0524f8accb6..c8988c01e0d7 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -442,10 +442,12 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
* specify how to write bad block markers to OOB (chip->block_markbad).
*
* We try operations in the following order:
+ *
* (1) erase the affected block, to allow OOB marker to be written cleanly
* (2) write bad block marker to OOB area of affected block (unless flag
* NAND_BBT_NO_OOB_BBM is present)
* (3) update the BBT
+ *
* Note that we retain the first error encountered in (2) or (3), finish the
* procedures, and dump the error in the end.
*/
@@ -1155,9 +1157,10 @@ int nand_reset(struct nand_chip *chip, int chipnr)
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
- * @invert: when = 0, unlock the range of blocks within the lower and
+ * @invert:
+ * - when = 0, unlock the range of blocks within the lower and
* upper boundary address
- * when = 1, unlock the range of blocks outside the boundaries
+ * - when = 1, unlock the range of blocks outside the boundaries
* of the lower and upper boundary address
*
* Returs unlock status.
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9591e0fbe5bd..3d5b20379ba3 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -779,7 +779,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
* Minimum amount of bit errors per @ecc_step_ds guaranteed
* to be correctable. If unknown, set to zero.
* @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds,
- * also from the datasheet. It is the recommended ECC step
+ * also from the datasheet. It is the recommended ECC step
* size, if known; if unknown, set to zero.
* @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
* set to the actually used ONFI mode if the chip is
--
2.9.3