[PATCH 4/8] gpio: exar: Fix iomap request

From: Jan Kiszka
Date: Sat May 13 2017 - 03:30:58 EST


The UART driver already maps the resource for us. Trying to do this here
only fails and leaves us with a non-working device.

Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---
drivers/gpio/gpio-exar.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index 9138ee087c5d..d6ffb3d89b9c 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -128,14 +128,10 @@ static int gpio_exar_probe(struct platform_device *pdev)
return -ENODEV;

/*
- * Map the pci device to get the register addresses.
- * We will need to read and write those registers to control
- * the GPIO pins.
- * Using managed functions will save us from unmaping on exit.
- * As the device is enabled using managed functions by the
- * UART driver we can also use managed functions here.
+ * The UART driver must have mapped region 0 prior to registering this
+ * device - use it.
*/
- p = pcim_iomap(pcidev, 0, 0);
+ p = pcim_iomap_table(pcidev)[0];
if (!p)
return -ENOMEM;

--
2.12.0