pinctrl-sx150x.c broken in 4.11

From: Nikita Yushchenko
Date: Wed May 10 2017 - 15:32:35 EST


Hi

Looks like recent pinctrl changes - possibly commit 99e4f67508e1
("pinctrl: core: Use delayed work for hogs") - breaks pinctrl-sx150x
driver in all setups where it has any pinctrl settings in device tree.

AFAIU, pinctrl-sx150x is not a real pinctrl/pinmux driver, but it uses
pinctrl subsystem to provide control over GPIO lines it provides. But
for user, it is just a i2c-gpio device that is enabled via device tree,
and, like other devices, can have pinctrl-0 that points to "real" pinmux
configuration for involved hardware lines (i.e. line used for interrupt).

Problem is that when pinctrl-sx150x driver registers itself via
pinctrl_register(), pinctrl map that corresponds to pinctrl-0 property
of sx150x device tree node, is misinterpreted as hog. Corresponding
call chain is

pinctrl_enable() ->
pinctrl_claim_hogs() ->
create_pinctrl()

at this point, registered pinctrl maps are scanned and matched by device
name only, without checking map's control device. Then map is passed to
add_setting() with pctldev set to sx150x which does not provide
pinmux_ops, which errors out:

sx150x-pinctrl 10-0020: does not support mux function
sx150x-pinctrl 10-0020: could not map pin config for "VF610_PAD_PTB1"
sx150x-pinctrl 10-0020: error claiming hogs: -22
sx150x-pinctrl 10-0020: could not claim hogs: -22
sx150x-pinctrl 10-0020: Failed to register pinctrl device
sx150x-pinctrl: probe of 10-0020 failed with error -22

Before commit 99e4f67508e1 ("pinctrl: core: Use delayed work for hogs")
problem was hidden by not passing pinctrl device to add_setting(), but
instead getting that from map.


What is proper fix for this?
Maybe something like

diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 32822b0d9cd0..78dde7594825 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1038,6 +1038,9 @@ static struct pinctrl *create_pinctrl(struct
device *dev,
/* Map must be for this device */
if (strcmp(map->dev_name, devname))
continue;
+ if (pctldev &&
+ strcmp(dev_name(pctldev->dev), map->ctrl_dev_name))
+ continue;

ret = add_setting(p, pctldev, map);
/*