[PATCH v5 03/17] net: qca_7k: Use BIT macro

From: Stefan Wahren
Date: Wed May 10 2017 - 04:55:10 EST


Use the BIT macro for the CONFIG and INT register values.

Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
---
drivers/net/ethernet/qualcomm/qca_7k.h | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_7k.h b/drivers/net/ethernet/qualcomm/qca_7k.h
index 1cad851..4047f0a 100644
--- a/drivers/net/ethernet/qualcomm/qca_7k.h
+++ b/drivers/net/ethernet/qualcomm/qca_7k.h
@@ -54,15 +54,15 @@
#define SPI_REG_ACTION_CTRL 0x1B00

/* SPI_CONFIG register definition; */
-#define QCASPI_SLAVE_RESET_BIT (1 << 6)
+#define QCASPI_SLAVE_RESET_BIT BIT(6)

/* INTR_CAUSE/ENABLE register definition. */
-#define SPI_INT_WRBUF_BELOW_WM (1 << 10)
-#define SPI_INT_CPU_ON (1 << 6)
-#define SPI_INT_ADDR_ERR (1 << 3)
-#define SPI_INT_WRBUF_ERR (1 << 2)
-#define SPI_INT_RDBUF_ERR (1 << 1)
-#define SPI_INT_PKT_AVLBL (1 << 0)
+#define SPI_INT_WRBUF_BELOW_WM BIT(10)
+#define SPI_INT_CPU_ON BIT(6)
+#define SPI_INT_ADDR_ERR BIT(3)
+#define SPI_INT_WRBUF_ERR BIT(2)
+#define SPI_INT_RDBUF_ERR BIT(1)
+#define SPI_INT_PKT_AVLBL BIT(0)

void qcaspi_spi_error(struct qcaspi *qca);
int qcaspi_read_register(struct qcaspi *qca, u16 reg, u16 *result);
--
2.1.4