[RESEND PATCH v5 1/3] dt-bindings:phy:Add DT bindings documentation for NS2 USB DRD phy

From: Raviteja Garimella
Date: Wed May 10 2017 - 02:54:51 EST


This patch adds documentation for NS2 DRD Phy driver DT bindings

Signed-off-by: Raviteja Garimella <raviteja.garimella@xxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/phy/brcm,ns2-drd-phy.txt | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
new file mode 100644
index 0000000..04f063a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
@@ -0,0 +1,30 @@
+BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY
+
+Required properties:
+ - compatible: brcm,ns2-drd-phy
+ - reg: offset and length of the NS2 PHY related registers.
+ - reg-names
+ The below registers must be provided.
+ icfg - for DRD ICFG configurations
+ rst-ctrl - for DRD IDM reset
+ crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
+ usb2-strap - for port over current polarity reversal
+ - #phy-cells: Must be 0. No args required.
+ - vbus-gpios: vbus gpio binding
+ - id-gpios: id gpio binding
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+ usbdrd_phy: phy@66000960 {
+ #phy-cells = <0>;
+ compatible = "brcm,ns2-drd-phy";
+ reg = <0x66000960 0x24>,
+ <0x67012800 0x4>,
+ <0x6501d148 0x4>,
+ <0x664d0700 0x4>;
+ reg-names = "icfg", "rst-ctrl",
+ "crmu-ctrl", "usb2-strap";
+ id-gpios = <&gpio_g 30 0>;
+ vbus-gpios = <&gpio_g 31 0>;
+ };
--
2.1.0