Re: [PATCH 4/5] power: supply: bq27xxx: Look for status change on external power change

[Pali RohÃr]

On Sunday 07 May 2017 19:37:41 Paul Kocialkowski wrote:
> Hi,
> 
> Le vendredi 05 mai 2017 Ã 10:04 +0200, Pali RohÃr a Ãcrit :
> > On Sunday 30 April 2017 20:27:26 Paul Kocialkowski wrote:
> > > This introduces a dedicated status change work to look for power
> > > status change. It is triggered by external power change
> > > notifications and periodically retries detecting a power status
> > > change for 5 seconds.
> > > 
> > > This is largely inspired by a similar mechanism from the
> > > sbs-battery driver.
> > 
> > What is reason/motivation for such change? It should be written in
> > commit message (to help understand; not only for me), because
> > really I do not know why such patch is needed.
> 
> Well, I really don't understand how things can work out without this
> patch.
> 
> How exactly are external power notifications supposed to be handled
> with the current state of the driver?
> 
> From my tests, changes on external status change notifications were
> unreliable as they did not look for a status change at all and
> instead scheduled a poll work, which would not at any point call
> power_supply_changed, but instead update the status for later reads.
> 
> This is *not* the expected behavior. When an external power supply is
> connected/disconnected, the driver should detect the status change
> and report it as soon as detected. This is precisely what this patch
> does (as is done already with the sbs battery driver).
> 
> Note that it is up to *the driver* to report that status change, it
> must not wait for userspace to query whether something changed.
> 
> Does that clarify why this is needed?

Yea, now I see what is the reason... Problem is that bq27xxx does not 
provide any notification mechanism and we can only poll for changes.

Question is if timeout 5 seconds is always enough and what happen if 
not... Similarly if such additional wakeups does not increase 
cpu/battery/power usage on small embedded devices...

On Nokia N900 we have other HW with drivers which detect charger 
connection/disconnection and doing periodical polling for monitoring 
charge current and temperature.

> > > Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
> > > ---
> > >  drivers/power/supply/bq27xxx_battery.c | 38
> > > ++++++++++++++++++++++++++++++++--
> > >  include/linux/power/bq27xxx_battery.h  |  3 +++
> > >  2 files changed, 39 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/power/supply/bq27xxx_battery.c
> > > b/drivers/power/supply/bq27xxx_battery.c
> > > index 926bd58344d9..cade00df6162 100644
> > > --- a/drivers/power/supply/bq27xxx_battery.c
> > > +++ b/drivers/power/supply/bq27xxx_battery.c
> > > @@ -1190,6 +1190,11 @@ static int bq27xxx_battery_status(struct
> > > bq27xxx_device_info *di,
> > >  			status = POWER_SUPPLY_STATUS_CHARGING;
> > >  	}
> > >  
> > > +	if (di->status_retry == 0 && di->status_change_reference !=
> > > status) {
> > > +		di->status_change_reference = status;
> > > +		power_supply_changed(di->bat);
> > > +	}
> > > +
> > >  	val->intval = status;
> > >  
> > >  	return 0;
> > > @@ -1340,12 +1345,38 @@ static int
> > > bq27xxx_battery_get_property(struct power_supply *psy,
> > >  	return ret;
> > >  }
> > >  
> > > +static void bq27xxx_status_change(struct work_struct *work)
> > > +{
> > > +	struct bq27xxx_device_info *di =
> > > +			container_of(work, struct bq27xxx_device_info,
> > > +				     status_work.work);
> > > +	union power_supply_propval val;
> > > +	int ret;
> > > +
> > > +	bq27xxx_battery_update(di);
> > > +
> > > +	ret = bq27xxx_battery_status(di, &val);
> > > +	if (ret < 0)
> > > +		return;
> > > +
> > > +	if (di->status_change_reference != val.intval) {
> > > +		di->status_change_reference = val.intval;
> > > +		power_supply_changed(di->bat);
> > > +	}
> > > +
> > > +	if (di->status_retry > 0) {
> > > +		di->status_retry--;
> > > +		schedule_delayed_work(&di->status_work, HZ);
> > > +	}
> > > +}
> > > +
> > >  static void bq27xxx_external_power_changed(struct power_supply
> > > *psy) {
> > >  	struct bq27xxx_device_info *di =
> > >  	power_supply_get_drvdata(psy);
> > >  
> > > -	cancel_delayed_work_sync(&di->poll_work);
> > > -	schedule_delayed_work(&di->poll_work, 0);
> > > +	cancel_delayed_work_sync(&di->status_work);
> > > +	schedule_delayed_work(&di->status_work, HZ);
> > > +	di->status_retry = 5;
> > >  }
> > >  
> > >  int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
> > > @@ -1357,8 +1388,10 @@ int bq27xxx_battery_setup(struct
> > > bq27xxx_device_info *di)
> > >  	psy_cfg.of_node = di->of_node;
> > >  
> > >  	INIT_DELAYED_WORK(&di->poll_work, bq27xxx_battery_poll);
> > > +	INIT_DELAYED_WORK(&di->status_work, bq27xxx_status_change);
> > >  	mutex_init(&di->lock);
> > >  	di->regs = bq27xxx_regs[di->chip];
> > > +	di->status_change_reference = POWER_SUPPLY_STATUS_UNKNOWN;
> > >  
> > >  	psy_desc = devm_kzalloc(di->dev, sizeof(*psy_desc),
> > > GFP_KERNEL); if (!psy_desc)
> > > @@ -1400,6 +1433,7 @@ void bq27xxx_battery_teardown(struct
> > > bq27xxx_device_info *di)
> > >  	poll_interval = 0;
> > >  
> > >  	cancel_delayed_work_sync(&di->poll_work);
> > > +	cancel_delayed_work_sync(&di->status_work);
> > >  
> > >  	power_supply_unregister(di->bat);
> > >  
> > > diff --git a/include/linux/power/bq27xxx_battery.h
> > > b/include/linux/power/bq27xxx_battery.h
> > > index 0a9af513165a..16d604681ace 100644
> > > --- a/include/linux/power/bq27xxx_battery.h
> > > +++ b/include/linux/power/bq27xxx_battery.h
> > > @@ -67,6 +67,9 @@ struct bq27xxx_device_info {
> > >  	int charge_design_full;
> > >  	unsigned long last_update;
> > >  	struct delayed_work poll_work;
> > > +	struct delayed_work status_work;
> > > +	int status_retry;
> > > +	int status_change_reference;
> > >  	struct power_supply *bat;
> > >  	struct list_head list;
> > >  	struct mutex lock;

-- 
Pali RohÃr
pali.rohar@xxxxxxxxx

Attachment: signature.asc
Description: This is a digitally signed message part.