Re: [PATCH v5 00/10] Renesas RZ/A1 pin and gpio controller

[Simon Horman]

On Thu, Apr 27, 2017 at 10:42:02AM +0200, Geert Uytterhoeven wrote:
> Hi Jacopo,
> 
> On Thu, Apr 27, 2017 at 10:19 AM, Jacopo Mondi
> <jacopo+renesas@xxxxxxxxxx> wrote:
> >    this is 5th round of gpio/pincontroller for RZ/A1 devices.
> >
> > I have updated the pin controller driver to use the newly introduced
> > "pinctrl_enable()" function.
> > This is required since v4.11-rc7 as otherwise, as reported by Chris Brandt,
> > the pin controller does not start.
> >
> > I have incorporated your comments on the device tree bindings documentation,
> > and added to pinctrl-generic.h header file two macros to unpack generic
> > properties and their arguments.
> >
> > Tested with SCIF, RIIC, ETHER and gpio-leds on Genmai board.
> 
> Thanks for the update!
> 
> > Jacopo Mondi (10):
> >   pinctrl: generic: Add bi-directional and output-enable
> 
> Already applied by LinusW.
> 
> >   pinctrl: generic: Add macros to unpack properties
> 
> LinusW: do you want me to queue this together with the driver for v4.13,
> or will you take this single patch for v4.12?
> 
> >   pinctrl: Renesas RZ/A1 pin and gpio controller
> >   dt-bindings: pinctrl: Add RZ/A1 bindings doc
> 
> Will queue in sh-pfc-for-v4.13.
> 
> >   arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
> >   arm: dts: r7s72100: Add pin controller node
> >   arm: dts: genmai: Add SCIF2 pin group
> >   arm: dts: genmai: Add RIIC2 pin group
> >   arm: dts: genmai: Add user led device nodes
> >   arm: dts: genmai: Add ethernet pin group
> 
> These are for Simon.
> 
> Does applying the DTS changes before the driver introduce regressions?
> If no, Simon can queue them for v4.13.
> If yes, they'll have to wait for v4.14.

That is my question too.