Re: [PATCH v1 4/7] mfd: intel_soc_pmic_bxtwc: remove second level irq for gpio device

[Lee Jones]

On Mon, 10 Apr 2017, sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx wrote:

> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
> 
> Currently all PMIC GPIO domain irqs are consumed by the same
> device(bxt_wcove_gpio), so there is no need to export them as
> separate interrupts. We can just export only the first level
> GPIO irq(BXTWC_GPIO_LVL1_IRQ) as an irq resource and let the
> GPIO device driver(bxt_wcove_gpio) handle the GPIO sub domain
> irqs based on status value of GPIO level2 interrupt status
> register. Also, just using only the first level irq will eliminate
> the bug involved in requesting only the second level irq and not
> explicitly enable the first level irq. For more info on this
> issue please read the details at,
> 
> https://lkml.org/lkml/2017/2/27/148
> 
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
> ---
>  drivers/mfd/intel_soc_pmic_bxtwc.c | 7 +------
>  1 file changed, 1 insertion(+), 6 deletions(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx>
  
> diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
> index c08d514..dc8af1d 100644
> --- a/drivers/mfd/intel_soc_pmic_bxtwc.c
> +++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
> @@ -88,8 +88,6 @@ enum bxtwc_irqs_level2 {
>  	BXTWC_USBC_IRQ,
>  	BXTWC_CHGR0_IRQ,
>  	BXTWC_CHGR1_IRQ,
> -	BXTWC_GPIO0_IRQ,
> -	BXTWC_GPIO1_IRQ,
>  	BXTWC_CRIT_IRQ,
>  };
>  
> @@ -115,8 +113,6 @@ static const struct regmap_irq bxtwc_regmap_irqs_level2[] = {
>  	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 2, BIT(5)),
>  	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 2, 0x1f),
>  	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 3, 0x1f),
> -	REGMAP_IRQ_REG(BXTWC_GPIO0_IRQ, 4, 0xff),
> -	REGMAP_IRQ_REG(BXTWC_GPIO1_IRQ, 5, 0x3f),
>  	REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 6, 0x03),
>  };
>  
> @@ -152,8 +148,7 @@ static struct regmap_irq_chip bxtwc_regmap_irq_chip_tmu = {
>  };
>  
>  static struct resource gpio_resources[] = {
> -	DEFINE_RES_IRQ_NAMED(BXTWC_GPIO0_IRQ, "GPIO0"),
> -	DEFINE_RES_IRQ_NAMED(BXTWC_GPIO1_IRQ, "GPIO1"),
> +	DEFINE_RES_IRQ_NAMED(BXTWC_GPIO_LVL1_IRQ, "GPIO"),
>  };
>  
>  static struct resource adc_resources[] = {

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog