Re: [PATCH V8 0/4] phy: USB and PCIe phy drivers for Qcom chipsets

From: Kishon Vijay Abraham I
Date: Thu Apr 06 2017 - 06:12:55 EST




On Thursday 06 April 2017 11:21 AM, Vivek Gautam wrote:
> Hi Kishon,
> Here's the series with fixed checkpatch warnings/checks.
> Please pick it for phy/next.
>
> This patch series adds couple of PHY drivers for Qualcomm chipsets.
> a) qcom-qusb2 phy driver: that provides High Speed USB functionality.
> b) qcom-qmp phy driver: that is a combo phy providing support for
> USB3, PCIe, UFS and few other controllers.
>
> The patches are based on next branch of linux-phy tree.
>
> These patches have been tested on Dragon board db820c hardware with
> required set of dt patches.
> The tested branch[3] is based on torvald's master with greg's usb/usb-next
> merged. Additionally the patches to get rpm up on msm8996 are also pulled
> in.

merged, thanks!

-Kishon
>
> Changes since v7:
> - Fixed 'checkpatch --strict' alignment warnings/checks, and
> added Stephen's Reviewed-by tag.
>
> Changes since v6:
> - Rebased on phy/next and *not* including phy grouping series[4].
> - qusb2-phy: addressed Stephen's comment.
> - Dropped pm8994_s2 corner regulator from QUSB2 phy bindings.
> - qmp-phy: none on functionality side.
>
> Changes since v5:
> - Addressed review comments from Bjorn:
> - Removed instances of readl/wirtel_relaxed calls from the drivers.
> Instead, using simple readl/writel. Inserting a readl after a writel
> to ensure the write is through to the device.
> - Replaced regulator handling with regulator_bulk_** apis. This helps
> in cutting down a lot of regulator handling code.
> - Fixed minor return statements.
>
> Changes since v4:
> - Addressed comment to add child nodes for qmp phy driver. Each phy lane
> now has a separate child node under the main qmp node.
> - Modified the clock and reset initialization and enable methods.
> Different phys - pcie, usb and later ufs, have varying number of clocks
> and resets that are mandatory. So adding provision for clocks and reset
> lists helps in requesting all mandatory resources for individual phys
> and handle their failure cases accordingly.
>
> Changes since v3:
> - Addressed review comments given by Rob and Stephen for qusb2 phy
> and qmp phy bindings respectively.
> - Addressed review comments given by Stephen and Bjorn for qmp phy driver.
>
> Changes since v2:
> - Addressed review comments given by Rob and Stephen for bindings.
> - Addressed the review comments given by Stephen for the qusb2 and qmp
> phy drivers.
>
> Changes since v1:
> - Moved device tree binding documentation to separate patches, as suggested
> by Rob.
> - Addressed review comment regarding qfprom accesses by qusb2 phy driver,
> given by Rob.
> - Addressed review comments from Kishon.
> - Addressed review comments from Srinivas for QMP phy driver.
> - Addressed kbuild warning.
>
> Please see individual patches for detailed changelogs.
>
> [1] https://patchwork.kernel.org/patch/9567767/
> [2] https://patchwork.kernel.org/patch/9567779/
> [3] https://github.com/vivekgautam1/linux/tree/linux-v4.11-rc5-qmp-phy-db820c
> [4] https://lkml.org/lkml/2017/3/20/407
>
> Vivek Gautam (4):
> dt-bindings: phy: Add support for QUSB2 phy
> phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips
> dt-bindings: phy: Add support for QMP phy
> phy: qcom-qmp: new qmp phy driver for qcom-chipsets
>
> .../devicetree/bindings/phy/qcom-qmp-phy.txt | 106 ++
> .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 43 +
> drivers/phy/Kconfig | 18 +
> drivers/phy/Makefile | 2 +
> drivers/phy/phy-qcom-qmp.c | 1153 ++++++++++++++++++++
> drivers/phy/phy-qcom-qusb2.c | 493 +++++++++
> 6 files changed, 1815 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> create mode 100644 drivers/phy/phy-qcom-qmp.c
> create mode 100644 drivers/phy/phy-qcom-qusb2.c
>