Re: [PATCH v4 2/2] iio: Aspeed ADC

From: Rick Altherr
Date: Wed Apr 05 2017 - 19:50:47 EST


On Wed, Apr 5, 2017 at 1:27 PM, Stephen Boyd <sboyd@xxxxxxxxxxxxxx> wrote:
> On 03/23, Rick Altherr wrote:
>> +
>> +static int aspeed_adc_probe(struct platform_device *pdev)
>> +{
>> + struct iio_dev *indio_dev;
>> + struct aspeed_adc_data *data;
>> + const struct aspeed_adc_model_data *model_data;
>> + struct resource *res;
>> + const char *clk_parent_name;
>> + int ret;
>> + u32 adc_engine_control_reg_val;
>> +
>> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*data));
>> + if (!indio_dev)
>> + return -ENOMEM;
>> +
>> + data = iio_priv(indio_dev);
>> + data->dev = &pdev->dev;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + data->base = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(data->base))
>> + return PTR_ERR(data->base);
>> +
>> + /* Register ADC clock prescaler with source specified by device tree. */
>> + spin_lock_init(&data->clk_lock);
>> + clk_parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
>
> What if the parent clk is not registered yet? Or if we're not
> always using DT in this driver? Put another way, this code is
> fragile. But I guess it probably works well enough for now so no
> big deal, just pointing out my fear.

I'm not terribly worried about not using DT for this driver as it is
for an ARM SoC's built-in ADC which is only supported via DT. I take
your point though. What's the right way to do this? Use clk_get() to
request by name and clock-names in the DT?

>
>> +
>> + data->clk_prescaler = clk_hw_register_divider(
>> + &pdev->dev, "prescaler", clk_parent_name, 0,
>> + data->base + ASPEED_REG_CLOCK_CONTROL,
>> + 17, 15, 0, &data->clk_lock);
>> + if (IS_ERR(data->clk_prescaler))
>> + return PTR_ERR(data->clk_prescaler);
>> +
>> + /*
>> + * Register ADC clock scaler downstream from the prescaler. Allow rate
>> + * setting to adjust the prescaler as well.
>> + */
>> + data->clk_scaler = clk_hw_register_divider(
>> + &pdev->dev, "scaler", "prescaler",
>> + CLK_SET_RATE_PARENT,
>> + data->base + ASPEED_REG_CLOCK_CONTROL,
>> + 0, 10, 0, &data->clk_lock);
>> + if (IS_ERR(data->clk_scaler)) {
>> + ret = PTR_ERR(data->clk_scaler);
>> + goto scaler_error;
>> + }
>> +
>> + /* Start all channels in normal mode. */
>> + clk_prepare_enable(data->clk_scaler->clk);
>
> Eventually we'd like to get rid of hw->clk pointer so that users
> have to call some sort of clk_get() API and then we get warm
> fuzzies from knowing who is consuming a clk structure. Can you
> change this to register a clk provider and call clk_get()? I
> think a device that references itself should be OK in DT still,
> and would properly reflect what's going on.

Do you mean call of_clk_add_hw_provider with of_clk_hw_simple_get or
something else? I'm still wrapping my head around the distinction
between clk, clk_hw, and a clk provider.

>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project