Re: [PATCH v4 1/8] dt-bindings: mfd: add A33 GPADC binding

From: Lee Jones
Date: Wed Apr 05 2017 - 08:15:07 EST


On Wed, 05 Apr 2017, Quentin Schulz wrote:

> This patch adds documentation for the A33 GPADC binding.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> v4:
> - correct patch title,
>
> v3:
> - fixed missing allwinner in front of compatible,
> - updated compatible to allwinner,sun8i-a33-ths to better reflect the
> datasheet's name,
> - updated example's DT node name and label to ths,
>
> added in v2
> .../devicetree/bindings/mfd/sun4i-gpadc.txt | 59 ++++++++++++++++++++++
> 1 file changed, 59 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> new file mode 100644
> index 0000000..badff36
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> @@ -0,0 +1,59 @@
> +Allwinner SoCs' GPADC Device Tree bindings
> +------------------------------------------
> +The Allwinner SoCs all have an ADC that can also act as a thermal sensor
> +and sometimes as a touchscreen controller.
> +
> +Required properties:
> + - compatible: "allwinner,sun8i-a33-ths",
> + - reg: mmio address range of the chip,
> + - #thermal-sensor-cells: shall be 0,
> + - #io-channel-cells: shall be 0,
> +
> +Example:
> + ths: ths@01c25000 {
> + compatible = "allwinner,sun8i-a33-ths";
> + reg = <0x01c25000 0x100>;
> + #thermal-sensor-cells = <0>;
> + #io-channel-cells = <0>;
> + };
> +
> +sun4i, sun5i and sun6i SoCs are also supported via the older binding:
> +
> +sun4i resistive touchscreen controller
> +--------------------------------------
> +
> +Required properties:
> + - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
> + "allwinner,sun6i-a31-ts"
> + - reg: mmio address range of the chip
> + - interrupts: interrupt to which the chip is connected
> + - #thermal-sensor-cells: shall be 0
> +
> +Optional properties:
> + - allwinner,ts-attached : boolean indicating that an actual touchscreen
> + is attached to the controller
> + - allwinner,tp-sensitive-adjust : integer (4 bits)
> + adjust sensitivity of pen down detection
> + between 0 (least sensitive) and 15
> + (defaults to 15)
> + - allwinner,filter-type : integer (2 bits)
> + select median and averaging filter
> + samples used for median / averaging filter
> + 0: 4/2
> + 1: 5/3
> + 2: 8/4
> + 3: 16/8
> + (defaults to 1)
> +
> +Example:
> +
> + rtp: rtp@01c25000 {
> + compatible = "allwinner,sun4i-a10-ts";
> + reg = <0x01c25000 0x100>;
> + interrupts = <29>;
> + allwinner,ts-attached;
> + #thermal-sensor-cells = <0>;
> + /* sensitive/noisy touch panel */
> + allwinner,tp-sensitive-adjust = <0>;
> + allwinner,filter-type = <3>;
> + };

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog