Re: [PATCH v3 34/37] mtd: nand: allow drivers to request minimum alignment for passed buffer

From: Masahiro Yamada
Date: Fri Mar 31 2017 - 00:01:13 EST


Hi Boris,


2017-03-30 17:15 GMT+09:00 Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>:
> In some cases, nand_do_{read,write}_ops is passed with unaligned
> ops->datbuf. Drivers using DMA will be unhappy about unaligned
> buffer.
>
> The new struct member, buf_align, represents the minimum alignment
> the driver require for the buffer. If the buffer passed from the
> upper MTD layer does not have enough alignment, nand_do_*_ops will
> use bufpoi.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> ---
>
> I was hit by this problem when I ran
> # mount -t jffs2 /dev/mtdblock* /mnt
>
> The buffer passed to nand_do_*_ops has 4 byte offset.
> The Denali IP cannot do DMA to/from this buffer because it
> requires 16 byte alignment for DMA.
>
>
> Changes in v3:
> - Newly added
>
> Changes in v2: None
>
> drivers/mtd/nand/nand_base.c | 12 ++++++++----
> include/linux/mtd/nand.h | 2 ++
> 2 files changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index e9d3195..b528ffa 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -1953,9 +1953,10 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
>
> if (!aligned)
> use_bufpoi = 1;
> - else if (chip->options & NAND_USE_BOUNCE_BUFFER)
> - use_bufpoi = !virt_addr_valid(buf);
> - else
> + else if (chip->options & NAND_USE_BOUNCE_BUFFER) {
> + use_bufpoi = !virt_addr_valid(buf) ||
> + !IS_ALIGNED((unsigned long)buf, chip->buf_align);
> + } else
> use_bufpoi = 0;


I noticed I added unneeded braces here by mistake.
(When I was testing this part, I inserted printk here,
then I forgot to remove the {} . )

Can you fix-up it?

If requested, I can re-send it.





--
Best Regards
Masahiro Yamada