Re: [PATCH v3 2/3] irqchip: mtk-cirq: Add mediatek mtk-cirq implement

From: Mars Cheng
Date: Wed Mar 29 2017 - 03:53:27 EST


Hi Marc

comments inline

On Fri, 2017-03-24 at 16:22 +0000, Marc Zyngier wrote:
> On 14/02/17 02:56, Youlin Pei wrote:
> > In Mediatek SOCs, the CIRQ is a low power interrupt controller
> > designed to works outside MCUSYS which comprises with Cortex-Ax
> > cores,CCI and GIC.
> >
> > The CIRQ controller is integrated in between MCUSYS( include
> > Cortex-Ax, CCI and GIC ) and interrupt sources as the second
> > level interrupt controller. The external interrupts which outside
> > MCUSYS will feed through CIRQ then bypass to GIC. CIRQ can monitors
> > all edge trigger interupts. When an edge interrupt is triggered,
> > CIRQ can record the status and generate a pulse signal to GIC when
> > flush command executed.
> >
> > When system enters sleep mode, MCUSYS will be turned off to improve
> > power consumption, also GIC is power down. The edge trigger interrupts
> > will be lost in this scenario without CIRQ.
> >
> > This commit provides the CIRQ irqchip implement.
> >
> > Signed-off-by: Youlin Pei <youlin.pei@xxxxxxxxxxxx>
> > ---
> > drivers/irqchip/Makefile | 2 +-
> > drivers/irqchip/irq-mtk-cirq.c | 288 ++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 289 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/irqchip/irq-mtk-cirq.c
> >
> > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> > index 0e55d94..db9acd1 100644
> > --- a/drivers/irqchip/Makefile
> > +++ b/drivers/irqchip/Makefile
> > @@ -61,7 +61,7 @@ obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
> > obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
> > obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
> > obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o
> > -obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o
> > +obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o irq-mtk-cirq.o
> > obj-$(CONFIG_ARCH_DIGICOLOR) += irq-digicolor.o
> > obj-$(CONFIG_RENESAS_H8300H_INTC) += irq-renesas-h8300h.o
> > obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
> > diff --git a/drivers/irqchip/irq-mtk-cirq.c b/drivers/irqchip/irq-mtk-cirq.c
> > new file mode 100644
> > index 0000000..b5cf506
> > --- /dev/null
> > +++ b/drivers/irqchip/irq-mtk-cirq.c
> > @@ -0,0 +1,288 @@
> > +/*
> > + * Copyright (c) 2016 MediaTek Inc.
> > + * Author: Youlin.Pei <youlin.pei@xxxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqchip.h>
> > +#include <linux/irqdomain.h>
> > +#include <linux/of.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/of_address.h>
> > +#include <linux/slab.h>
> > +#include <linux/syscore_ops.h>
> > +
> > +#define CIRQ_ACK 0x40
> > +#define CIRQ_MASK_SET 0xc0
> > +#define CIRQ_MASK_CLR 0x100
> > +#define CIRQ_SENS_SET 0x180
> > +#define CIRQ_SENS_CLR 0x1c0
> > +#define CIRQ_POL_SET 0x240
> > +#define CIRQ_POL_CLR 0x280
> > +#define CIRQ_CONTROL 0x300
> > +
> > +#define CIRQ_EN 0x1
> > +#define CIRQ_EDGE 0x2
> > +#define CIRQ_FLUSH 0x4
> > +
> > +struct mtk_cirq_chip_data {
> > + void __iomem *base;
> > + unsigned int ext_irq_start;
> > + unsigned int ext_irq_end;
> > + struct irq_domain *domain;
> > +};
> > +
> > +static struct mtk_cirq_chip_data *cirq_data;
>
> Question in relation to the sysirq patches that have been queued for
> 4.12: Are we going to see something similar with this driver, where
> you're going to have to support multiple non-contiguous register sets?
> I'd rather have this kind of thing from day one, instead of adding that
> at a later time...
>
> Specially given that the platform that is using this driver does also
> have a sysirq controller.

sysirq is kind of special design which mediatek's HW guys put the bases
in a range with other misc usages. so sysirq might happen to have
several bases.

cirq is like other normal controller which has its own base and range.
We have all cirq design with single base.

Also asked our HW guys to allocate sysirq with single base as possible
in the future even they put it in misc address range.

Thanks.
>
> > +
> > +static void mtk_cirq_write_mask(struct irq_data *data, unsigned int offset)
> > +{
> > + struct mtk_cirq_chip_data *chip_data = data->chip_data;
> > + unsigned int cirq_num = data->hwirq;
> > + u32 mask = 1 << (cirq_num % 32);
> > +
> > + writel_relaxed(mask, chip_data->base + offset + (cirq_num / 32) * 4);
> > +}
> > +
> > +static void mtk_cirq_mask(struct irq_data *data)
> > +{
> > + mtk_cirq_write_mask(data, CIRQ_MASK_SET);
> > + irq_chip_mask_parent(data);
> > +}
> > +
> > +static void mtk_cirq_unmask(struct irq_data *data)
> > +{
> > + mtk_cirq_write_mask(data, CIRQ_MASK_CLR);
> > + irq_chip_unmask_parent(data);
> > +}
> > +
> > +static int mtk_cirq_set_type(struct irq_data *data, unsigned int type)
> > +{
> > + int ret;
> > +
> > + switch (type & IRQ_TYPE_SENSE_MASK) {
> > + case IRQ_TYPE_EDGE_FALLING:
> > + mtk_cirq_write_mask(data, CIRQ_POL_CLR);
> > + mtk_cirq_write_mask(data, CIRQ_SENS_CLR);
> > + break;
> > + case IRQ_TYPE_EDGE_RISING:
> > + mtk_cirq_write_mask(data, CIRQ_POL_SET);
> > + mtk_cirq_write_mask(data, CIRQ_SENS_CLR);
> > + break;
> > + case IRQ_TYPE_LEVEL_LOW:
> > + mtk_cirq_write_mask(data, CIRQ_POL_CLR);
> > + mtk_cirq_write_mask(data, CIRQ_SENS_SET);
> > + break;
> > + case IRQ_TYPE_LEVEL_HIGH:
> > + mtk_cirq_write_mask(data, CIRQ_POL_SET);
> > + mtk_cirq_write_mask(data, CIRQ_SENS_SET);
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + data = data->parent_data;
> > + ret = data->chip->irq_set_type(data, type);
> > + return ret;
> > +}
> > +
> > +static struct irq_chip mtk_cirq_chip = {
> > + .name = "MT_CIRQ",
> > + .irq_mask = mtk_cirq_mask,
> > + .irq_unmask = mtk_cirq_unmask,
> > + .irq_eoi = irq_chip_eoi_parent,
> > + .irq_set_type = mtk_cirq_set_type,
> > + .irq_retrigger = irq_chip_retrigger_hierarchy,
> > +#ifdef CONFIG_SMP
> > + .irq_set_affinity = irq_chip_set_affinity_parent,
> > +#endif
> > +};
> > +
> > +static int mtk_cirq_domain_translate(struct irq_domain *d,
> > + struct irq_fwspec *fwspec,
> > + unsigned long *hwirq,
> > + unsigned int *type)
> > +{
> > + if (is_of_node(fwspec->fwnode)) {
> > + if (fwspec->param_count != 3)
> > + return -EINVAL;
> > +
> > + /* No PPI should point to this domain */
> > + if (fwspec->param[0] != 0)
> > + return -EINVAL;
> > +
> > + /* cirq support irq number check */
> > + if (fwspec->param[1] < cirq_data->ext_irq_start ||
> > + fwspec->param[1] > cirq_data->ext_irq_end)
> > + return -EINVAL;
> > +
> > + *hwirq = fwspec->param[1] - cirq_data->ext_irq_start;
> > + *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
> > + return 0;
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > +static int mtk_cirq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> > + unsigned int nr_irqs, void *arg)
> > +{
> > + int ret;
> > + irq_hw_number_t hwirq;
> > + unsigned int type;
> > + struct irq_fwspec *fwspec = arg;
> > + struct irq_fwspec parent_fwspec = *fwspec;
> > +
> > + ret = mtk_cirq_domain_translate(domain, fwspec, &hwirq, &type);
> > + if (ret)
> > + return ret;
> > +
> > + if (WARN_ON(nr_irqs != 1))
> > + return -EINVAL;
> > +
> > + irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
> > + &mtk_cirq_chip,
> > + domain->host_data);
> > +
> > + parent_fwspec.fwnode = domain->parent->fwnode;
> > + return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
> > + &parent_fwspec);
> > +}
> > +
> > +static const struct irq_domain_ops cirq_domain_ops = {
> > + .translate = mtk_cirq_domain_translate,
> > + .alloc = mtk_cirq_domain_alloc,
> > + .free = irq_domain_free_irqs_common,
> > +};
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int mtk_cirq_suspend(void)
> > +{
> > + u32 value, mask;
> > + unsigned int irq, hwirq_num;
> > + bool pending, masked;
> > + int i, pendret, maskret;
> > +
> > + hwirq_num = cirq_data->ext_irq_end - cirq_data->ext_irq_start + 1;
> > + for (i = 0; i < hwirq_num; i++) {
> > + irq = irq_find_mapping(cirq_data->domain, i);
> > + if (irq) {
> > + pendret = irq_get_irqchip_state(irq,
> > + IRQCHIP_STATE_PENDING,
> > + &pending);
> > +
> > + maskret = irq_get_irqchip_state(irq,
> > + IRQCHIP_STATE_MASKED,
> > + &masked);
> > +
> > + if (pendret == 0 && maskret == 0 &&
> > + (pending && !masked))
> > + continue;
> > + }
> > +
> > + mask = 1 << (i % 32);
> > + writel_relaxed(mask, cirq_data->base + CIRQ_ACK + (i / 32) * 4);
> > + }
>
> It would be worth documenting exactly what this is for. I had to go back
> to our previous discussion in November to remember it.
>
> > +
> > + /* set edge_only mode, record edge-triggerd interrupts */
> > + /* enable cirq */
> > + value = readl_relaxed(cirq_data->base + CIRQ_CONTROL);
> > + value |= (CIRQ_EDGE | CIRQ_EN);
> > + writel_relaxed(value, cirq_data->base + CIRQ_CONTROL);
> > +
> > + return 0;
> > +}
> > +
> > +static void mtk_cirq_resume(void)
> > +{
> > + u32 value;
> > +
> > + /* flush recored interrupts, will send signals to parent controller */
> > + value = readl_relaxed(cirq_data->base + CIRQ_CONTROL);
> > + writel_relaxed(value | CIRQ_FLUSH, cirq_data->base + CIRQ_CONTROL);
> > +
> > + /* disable cirq */
> > + value = readl_relaxed(cirq_data->base + CIRQ_CONTROL);
> > + value &= ~(CIRQ_EDGE | CIRQ_EN);
> > + writel_relaxed(value, cirq_data->base + CIRQ_CONTROL);
> > +}
> > +
> > +static struct syscore_ops mtk_cirq_syscore_ops = {
> > + .suspend = mtk_cirq_suspend,
> > + .resume = mtk_cirq_resume,
> > +};
> > +
> > +static void mtk_cirq_syscore_init(void)
> > +{
> > + register_syscore_ops(&mtk_cirq_syscore_ops);
> > +}
> > +#else
> > +static inline void mtk_cirq_syscore_init(void) {}
> > +#endif
> > +
> > +static int __init mtk_cirq_of_init(struct device_node *node,
> > + struct device_node *parent)
> > +{
> > + struct irq_domain *domain, *domain_parent;
> > + unsigned int irq_num;
> > + int ret;
> > +
> > + domain_parent = irq_find_host(parent);
> > + if (!domain_parent) {
> > + pr_err("mtk_cirq: interrupt-parent not found\n");
> > + return -EINVAL;
> > + }
> > +
> > + cirq_data = kzalloc(sizeof(*cirq_data), GFP_KERNEL);
> > + if (!cirq_data)
> > + return -ENOMEM;
> > +
> > + cirq_data->base = of_iomap(node, 0);
> > + if (!cirq_data->base) {
> > + pr_err("mtk_cirq: unable to map cirq register\n");
> > + ret = -ENXIO;
> > + goto out_free;
> > + }
> > +
> > + ret = of_property_read_u32_index(node, "mediatek,ext-irq-range", 0,
> > + &cirq_data->ext_irq_start);
> > + if (ret)
> > + goto out_unmap;
> > +
> > + ret = of_property_read_u32_index(node, "mediatek,ext-irq-range", 1,
> > + &cirq_data->ext_irq_end);
> > + if (ret)
> > + goto out_unmap;
> > +
> > + irq_num = cirq_data->ext_irq_end - cirq_data->ext_irq_start + 1;
> > + domain = irq_domain_add_hierarchy(domain_parent, 0,
> > + irq_num, node,
> > + &cirq_domain_ops, cirq_data);
> > + if (!domain) {
> > + ret = -ENOMEM;
> > + goto out_unmap;
> > + }
> > + cirq_data->domain = domain;
> > +
> > + mtk_cirq_syscore_init();
> > +
> > + return 0;
> > +
> > +out_unmap:
> > + iounmap(cirq_data->base);
> > +out_free:
> > + kfree(cirq_data);
> > + return ret;
> > +}
> > +
> > +IRQCHIP_DECLARE(mtk_cirq, "mediatek,mtk-cirq", mtk_cirq_of_init);
> >
>
> It otherwise looks much better than the previous iteration.
>
> Thanks,
>
> M.