Re: [PATCH 4.4 00/30] 4.4.57-stable review

From: Alexandre Belloni
Date: Sat Mar 25 2017 - 07:27:45 EST


On 24/03/2017 at 21:15:28 -0700, Guenter Roeck wrote:
> On 03/24/2017 05:10 PM, Kevin Hilman wrote:
> > + at91 maintainers
> >

+ Richard, Ludovic

> > kernelci.org bot <bot@xxxxxxxxxxxx> writes:
> >
> > > stable-rc boot: 496 boots: 1 failed, 492 passed with 2 offline, 1 conflict (v4.4.56-31-gbcd1e808ead3)
> > >
> > > Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/kernel/v4.4.56-31-gbcd1e808ead3/
> > > Full Build Summary: https://kernelci.org/build/stable-rc/kernel/v4.4.56-31-gbcd1e808ead3/
> > >
> > > Tree: stable-rc
> > > Branch: local/linux-4.4.y
> > > Git Describe: v4.4.56-31-gbcd1e808ead3
> > > Git Commit: bcd1e808ead359a9af8476025d8b8a5349796dcd
> > > Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > > Tested: 97 unique boards, 23 SoC families, 31 builds out of 202
> > >
> > > Boot Regressions Detected:
> > >
> > > arm:
> > >
> > > multi_v7_defconfig+CONFIG_LKDTM=y:
> > > at91-sama5d2_xplained:
> > > lab-free-electrons: new failure (last pass: v4.4.51-27-g2ffd736763bc)
> >
> > This one is definitely a new regression. Hopefully the AT91 maintainers
> > (now Cc'd) can have a closer look.
> >
>
> 6b1d7b6f54c7 would be a candidate for a culprit.
>

Possibly and it may exercise a part of the logic that is not quite
robust in atmel_set_ops(). Basically, atmel_rx_from_pdc() must not be
chosen on sama5d2 (it has no PDC).

For reference, bootlog here:
https://storage.kernelci.org/stable-rc/v4.4.56-31-gbcd1e808ead3/arm-multi_v7_defconfig+CONFIG_LKDTM=y/lab-free-electrons/boot-at91-sama5d2_xplained.html

> > > Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)
> > >
> > > arm:
> > >
> > > multi_v7_defconfig+CONFIG_PROVE_LOCKING=y:
> > > at91-sama5d3_xplained:
> > > lab-baylibre-seattle: PASS
> > > lab-free-electrons: FAIL
> >
> > @Alexandre: Because it's passing in my lab and failing in yours, I'm
> > guessing this is still the UART overflow issue we've discussed before?
> >
> > What's strange is that this defconfig in your lab seems to only be
> > booting for stable/linux-4.4.y[1] but not mailine or newer stable trees,
> > so I couldn't check if the problem still exists in mainline.
> >

It definitively exists but it is not solvable quickly. Either we run
without DMA and we'll see the issue because CONFIG_PROVE_LOCKING makes
the interrupt handling to slow and characters are dropped. Or, we add
DMA and then CONFIG_PROVE_LOCKING will find a deadlock (that's a real
deadlock, not a false positive) and the platform will not boot.

This only affects sama5d3 because it is the only SoC using the hdma
controller with the uart IP. Earlier SoCs have a PDC and later SoCs are
using the xdma controller.

This happens because atc_chain_complete() keeps the lock before calling
the callback. And atmel_complete_tx_dma() will call dmaengine function
that will try to acquire the lock. No issue using the xdmac because
there is no lock.

--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com