Re: [PATCH v2] net: mvneta: support suspend and resume

From: Jisheng Zhang
Date: Wed Mar 15 2017 - 23:42:10 EST


On Thu, 16 Mar 2017 11:19:10 +0800 Jane Li wrote:

> Add basic support for handling suspend and resume.
>
> Signed-off-by: Jane Li <jiel@xxxxxxxxxxx>
> ---
> Since v1:
> - add mvneta_conf_mbus_windows() and mvneta_bm_port_init() in mvneta_resume()
>
> drivers/net/ethernet/marvell/mvneta.c | 62 ++++++++++++++++++++++++++++++++---
> 1 file changed, 58 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> index 61dd446..250017b 100644
> --- a/drivers/net/ethernet/marvell/mvneta.c
> +++ b/drivers/net/ethernet/marvell/mvneta.c
> @@ -431,6 +431,7 @@ struct mvneta_port {
> /* Flags for special SoC configurations */
> bool neta_armada3700;
> u16 rx_offset_correction;
> + const struct mbus_dram_target_info *dram_target_info;
> };
>
> /* The mvneta_tx_desc and mvneta_rx_desc structures describe the
> @@ -4118,7 +4119,6 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
> /* Device initialization routine */
> static int mvneta_probe(struct platform_device *pdev)
> {
> - const struct mbus_dram_target_info *dram_target_info;
> struct resource *res;
> struct device_node *dn = pdev->dev.of_node;
> struct device_node *phy_node;
> @@ -4267,13 +4267,13 @@ static int mvneta_probe(struct platform_device *pdev)
>
> pp->tx_csum_limit = tx_csum_limit;
>
> - dram_target_info = mv_mbus_dram_info();
> + pp->dram_target_info = mv_mbus_dram_info();
> /* Armada3700 requires setting default configuration of Mbus
> * windows, however without using filled mbus_dram_target_info
> * structure.
> */
> - if (dram_target_info || pp->neta_armada3700)
> - mvneta_conf_mbus_windows(pp, dram_target_info);
> + if (pp->dram_target_info || pp->neta_armada3700)
> + mvneta_conf_mbus_windows(pp, pp->dram_target_info);
>
> pp->tx_ring_size = MVNETA_MAX_TXD;
> pp->rx_ring_size = MVNETA_MAX_RXD;
> @@ -4405,6 +4405,59 @@ static int mvneta_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int mvneta_suspend(struct device *device)
> +{
> + struct net_device *dev = dev_get_drvdata(device);
> + struct mvneta_port *pp = netdev_priv(dev);
> +
> + if (netif_running(dev))
> + mvneta_stop(dev);
> + netif_device_detach(dev);
> + clk_disable_unprepare(pp->clk_bus);
> + clk_disable_unprepare(pp->clk);
> + return 0;
> +}
> +
> +static int mvneta_resume(struct device *device)
> +{
> + struct platform_device *pdev = to_platform_device(device);
> + struct net_device *dev = dev_get_drvdata(device);
> + struct mvneta_port *pp = netdev_priv(dev);
> + int err;
> +
> + clk_prepare_enable(pp->clk);
> + clk_prepare_enable(pp->clk_bus);
> + if (pp->dram_target_info || pp->neta_armada3700)
> + mvneta_conf_mbus_windows(pp, pp->dram_target_info);
> + if (pp->bm_priv) {
> + err = mvneta_bm_port_init(pdev, pp);
> + if (err < 0) {
> + dev_info(&pdev->dev, "use SW buffer management\n");
> + pp->bm_priv = NULL;
> + }
> + }
> + mvneta_defaults_set(pp);
> + err = mvneta_port_power_up(pp, pp->phy_interface);
> + if (err < 0) {
> + dev_err(device, "can't power up port\n");
> + return err;
> + }
> +
> + if (pp->use_inband_status)
> + mvneta_fixed_link_update(pp, dev->phydev);
> +
> + netif_device_attach(dev);
> + if (netif_running(dev))
> + mvneta_open(dev);
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops mvneta_pm_ops = {
> + SET_LATE_SYSTEM_SLEEP_PM_OPS(mvneta_suspend, mvneta_resume)
> +};

we could make use of SIMPLE_DEV_PM_OPS to simplify the code

Thanks