[PATCH net-next 11/12] dt-bindings: net: update bcmgenet binding for GENETv5

From: Doug Berger
Date: Mon Mar 13 2017 - 20:44:19 EST


The device tree documentation must be updated to reflect the new compatible
strings "brcm,genet-v5" and "brcm,genet-mdio-v5" used by the GENETv5 driver.

Signed-off-by: Doug Berger <opendmb@xxxxxxxxx>
---
Documentation/devicetree/bindings/net/brcm,bcmgenet.txt | 10 +++++-----
Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt | 5 +++--
2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
index 01a70463cbc5..26c77d985faf 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
@@ -2,7 +2,7 @@

Required properties:
- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
- "brcm,genet-v3", "brcm,genet-v4".
+ "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5".
- reg: address and length of the register set for the device
- interrupts and/or interrupts-extended: must be two cells, the first cell
is the general purpose interrupt line, while the second cell is the
@@ -32,15 +32,15 @@ Optional properties:

Required child nodes:

-- mdio bus node: this node should always be present regarless of the PHY
+- mdio bus node: this node should always be present regardless of the PHY
configuration of the GENET instance

MDIO bus node required properties:

- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
- "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", the version has to match the
- parent node compatible property (e.g: brcm,genet-v4 pairs with
- brcm,genet-mdio-v4)
+ "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version
+ has to match the parent node compatible property (e.g: brcm,genet-v4 pairs
+ with brcm,genet-mdio-v4)
- reg: address and length relative to the parent node base register address
- #address-cells: address cell for MDIO bus addressing, should be 1
- #size-cells: size of the cells for MDIO bus addressing, should be 0
diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
index ab0bb4247d14..4648948f7c3b 100644
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
@@ -2,8 +2,9 @@

Required properties:
- compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2",
- "brcm,genet-mdio-v3", "brcm,genet-mdio-v4" or "brcm,unimac-mdio"
-- reg: address and length of the regsiter set for the device, first one is the
+ "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5" or
+ "brcm,unimac-mdio"
+- reg: address and length of the register set for the device, first one is the
base register, and the second one is optional and for indirect accesses to
larger than 16-bits MDIO transactions
- reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw"
--
2.11.1