Re: [PATCH v5 3/4] dt-bindings: phy: Add support for QMP phy

[Vivek Gautam]

On 03/09/2017 04:37 PM, Bjorn Andersson wrote:
> On Thu 09 Mar 10:07 CET 2017, Vivek Gautam wrote:
>
> [..]
> > +	phy@34000 {
> > +		compatible = "qcom,msm8996-qmp-pcie-phy";
> > +		reg = <0x034000 0x488>;
> Drop the leading 0 from the address.

Okay, will drop it.

> > +		#clock-cells = <1>;
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges;
> > +
> > +		clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
> > +			<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
> > +			<&gcc GCC_PCIE_CLKREF_CLK>;
> > +		clock-names = "aux", "cfg_ahb", "ref";
> > +
> > +		vdda-phy-supply = <&pm8994_l28>;
> > +		vdda-pll-supply = <&pm8994_l12>;
> > +
> > +		resets = <&gcc GCC_PCIE_PHY_BCR>,
> > +			<&gcc GCC_PCIE_PHY_COM_BCR>,
> > +			<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
> > +		reset-names = "phy", "common", "cfg";
> > +
> > +		pciephy_0: lane@0 {
> The "@xyz" part should match the first value in "reg", i.e. 35000 here.

Right, i think this came from my older version of patches. Will correct it.

Regards
Vivek
> > +			reg = <0x035000 0x130>,
> > +				<0x035200 0x200>,
> > +				<0x035400 0x1dc>;
> > +			#phy-cells = <0>;
> > +
> > +			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
> > +			clock-names = "pipe0";
> > +			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
> > +			reset-names = "lane0";
> > +		};
> > +
> > +		pciephy_1: lane@1 {
> > +		...
> > +		...
> > +	};
> Regards,
> Bjorn

--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project