[PATCH v3 0/3] Add EHCI support for Armada 37xx

From: Gregory CLEMENT
Date: Thu Mar 09 2017 - 12:44:29 EST


Hi,

The EHCI controller in the Armada 37xx SoCs is the one used on many
other mvebu SoCs such as the orion5x, the kirkwood, or the
armada. However, for Armada 37xx an extra initialization step is
needed: this is the purpose of the first patch.

The second patch allows to build the driver for the ARM64 Armada SoCs.

The last one enables the EHCI in the device tree.

This third version takes into account the review from Alan Stern.

Thanks,

Gregory

Changelog:
v2-> v3:
- Remove the _SHIFT define and use their value directly, suggested by
Alan Stern
- Remove unnecessary error message in ehci_orion_drv_reset() ,
suggested by Alan Stern
- Exit ehci_orion_drv_reset() if ehci_setup() failed, suggested by
Alan Stern
- Add Reviewed-by flag from Andrew Lunn

v1 -> v2:
- Fix typo in commit log of the patch 1, suggested by Andrew Lunn
- Fix wording in the device tree binding documenation, suggested by
Andrew Lunn
- Make new define symbol name more clear by adding _SHIFT to the end,
suggested by Andrew Lunn
- Use a full first name + last name for the Signed-off-by and the
Authorship i oatch 1, suggested by Thomas Petazzoni.
- Improve the commit log of the patch 2, suggested by Andrew Lunn
- Fix Kconfig logic, suggested by Andrew Lunn

Gregory CLEMENT (2):
usb: host: Allow to build ehci orion with mvebu SoCs
ARM64: dts: marvell: armada-37xx: Add USB2 node

Hua Jing (1):
usb: orion-echi: Add support for the Armada 3700

.../devicetree/bindings/usb/ehci-orion.txt | 4 ++-
arch/arm64/boot/dts/marvell/armada-3720-db.dts | 6 ++++
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 7 ++++
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/ehci-orion.c | 39 ++++++++++++++++++++++
5 files changed, 56 insertions(+), 2 deletions(-)

--
2.11.0