Re: [PATCH V3 0/4] megachips-stdpxxxx-ge-b850v3-fw

From: Lucas Stach
Date: Wed Mar 08 2017 - 06:10:09 EST


Am Mittwoch, den 08.03.2017, 10:42 +0100 schrieb Peter Senna Tschudin:
> On Mon, Mar 06, 2017 at 03:27:16PM +0530, Archit Taneja wrote:
> Hi Archit,
>
> > Hi,
> >
> > On 3/3/2017 9:27 PM, Peter Senna Tschudin wrote:
> > > The video processing pipeline on the second output on the GE B850v3:
> > >
> > > Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
> > >
> > > Each bridge has a dedicated flash containing firmware for supporting the
> > > custom design. The result is that in this design neither the STDP4028
> > > nor the STDP2690 behave as the stock bridges would. The compatible
> > > strings include the suffix "-ge-b850v3-fw" to make it clear that the
> > > driver is for the bridges with the firmware which is specific for the GE
> > > B850v3.
> > >
> > > The driver is powerless to control the video processing pipeline, as the
> > > two bridges behaves as a single one. The driver is only needed for
> > > telling the host about EDID / HPD, and for giving the host powers to ack
> > > interrupts.
> >
> > queued Patches 1,2 and 3 to drm-misc-next. Made stdp2690_get_edid static
> > in Patch #3 to fix a sparse warning.
>
> What about 4/4, aka the dt change? Do I need an ack from Rob Herring?
>
> Thanks a lot!

This one needs to go through Shawn Guo. Now that the driver and binding
are in it is probably best to ask him directly to pick it up.

Regards,
Lucas