[PATCH 10/10] Added vendor prefix. Added range information

[Ryan Lee]

Signed-off-by: Ryan Lee <ryans.lee@xxxxxxxxxxxxxxxxxxx>
---
Vendor prefix was added.
Range information of each propery was added.

 .../devicetree/bindings/sound/max98927.txt         | 33 +++++++++++++---------
 sound/soc/codecs/max98927.c                        |  8 ++++--
 2 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/max98927.txt b/Documentation/devicetree/bindings/sound/max98927.txt
index ddcd332..d610879 100755
--- a/Documentation/devicetree/bindings/sound/max98927.txt
+++ b/Documentation/devicetree/bindings/sound/max98927.txt
@@ -6,19 +6,25 @@ Required properties:
 
   - compatible : "maxim,max98927"
 
-  - vmon-slot-no : slot number used to send voltage information
+  - maxim,vmon-slot-no : slot number used to send voltage information
                    or in inteleave mode this will be used as
                    interleave slot.
-
-  - imon-slot-no : slot number used to send current information
-
-  - interleave-mode : When using two MAX98927 in a system it is
-                      possible to create ADC data that that will
-                      overflow the frame size. Digital Audio Interleave
-                      mode provides a means to output VMON and IMON data
-                      from two devices on a single DOUT line when running
-                      smaller frames sizes such as 32 BCLKS per LRCLK or
-                      48 BCLKS per LRCLK.
+                   This property can be set to values from 0 to 15 for slot 0 to 15.
+                   Default value is 0.
+
+  - maxim,imon-slot-no : slot number used to send current information
+                   This property can be set to values from 0 to 15 for slot 0 to 15.
+                   Default value is 0.
+
+  - maxim,interleave-mode : When using two MAX98927 in a system it is
+                   possible to create ADC data that that will
+                   overflow the frame size. Digital Audio Interleave
+                   mode provides a means to output VMON and IMON data
+                   from two devices on a single DOUT line when running
+                   smaller frames sizes such as 32 BCLKS per LRCLK or
+                   48 BCLKS per LRCLK.
+                   This property can be set to values from 0 to 1 for off and on.
+                   Default value is 0.
 
   - reg : the I2C address of the device for I2C
 
@@ -26,7 +32,8 @@ Example:
 
 codec: max98927@3a {
    compatible = "maxim,max98927";
-   vmon-slot-no = <1>;
-   imon-slot-no = <0>;
+   maxim,vmon-slot-no = <0>;
+   maxim,imon-slot-no = <1>;
+   maxim,interleave-mode = <0>;
    reg = <0x3a>;
 };
diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c
index 0614936..b9b7621 100755
--- a/sound/soc/codecs/max98927.c
+++ b/sound/soc/codecs/max98927.c
@@ -926,11 +926,13 @@ static void max98927_slot_config(struct i2c_client *i2c,
 {
 	int value;
 
-	if (!of_property_read_u32(i2c->dev.of_node, "vmon-l-slot", &value))
+	if (!of_property_read_u32(i2c->dev.of_node,
+		"maxim,vmon-slot-no", &value))
 		max98927->v_l_slot = value & 0xF;
 	else
 		max98927->v_l_slot = 0;
-	if (!of_property_read_u32(i2c->dev.of_node, "imon-l-slot", &value))
+	if (!of_property_read_u32(i2c->dev.of_node,
+		"maxim,imon-slot-no", &value))
 		max98927->i_l_slot = value & 0xF;
 	else
 		max98927->i_l_slot = 1;
@@ -954,7 +956,7 @@ static int max98927_i2c_probe(struct i2c_client *i2c,
 
 	/* update interleave mode info */
 	if (!of_property_read_u32(i2c->dev.of_node,
-		"interleave_mode", &value)) {
+		"maxim,interleave_mode", &value)) {
 		if (value > 0)
 			max98927->interleave_mode = 1;
 		else
-- 
2.7.4