[PATCH 4/4] tty/serial: sh-sci: remove uneeded IS_ERR_OR_NULL calls

From: Richard Genoud
Date: Fri Mar 03 2017 - 09:33:43 EST


Since commit 1d267ea6539f ("serial: mctrl-gpio: simplify init routine"),
the mctrl_gpio_to_gpiod() function can't return an error anymore.
So, just testing for a NULL pointer is ok.

Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
---
drivers/tty/serial/sh-sci.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 9a47cc4f16a2..36fde6f24040 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1934,12 +1934,12 @@ static unsigned int sci_get_mctrl(struct uart_port *port)
if (s->autorts) {
if (sci_get_cts(port))
mctrl |= TIOCM_CTS;
- } else if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(gpios, UART_GPIO_CTS))) {
+ } else if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_CTS)) {
mctrl |= TIOCM_CTS;
}
- if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(gpios, UART_GPIO_DSR)))
+ if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_DSR))
mctrl |= TIOCM_DSR;
- if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(gpios, UART_GPIO_DCD)))
+ if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_DCD))
mctrl |= TIOCM_CAR;

return mctrl;
@@ -3072,10 +3072,8 @@ static int sci_probe_single(struct platform_device *dev,
return PTR_ERR(sciport->gpios);

if (sciport->has_rtscts) {
- if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(sciport->gpios,
- UART_GPIO_CTS)) ||
- !IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(sciport->gpios,
- UART_GPIO_RTS))) {
+ if (mctrl_gpio_to_gpiod(sciport->gpios, UART_GPIO_CTS) ||
+ mctrl_gpio_to_gpiod(sciport->gpios, UART_GPIO_RTS)) {
dev_err(&dev->dev, "Conflicting RTS/CTS config\n");
return -EINVAL;
}