Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support

From: Boris Brezillon
Date: Thu Mar 02 2017 - 10:54:42 EST


On Thu, 2 Mar 2017 16:03:17 +0100
Frode Isaksen <fisaksen@xxxxxxxxxxxx> wrote:

> On 02/03/2017 15:29, Boris Brezillon wrote:
> > On Thu, 2 Mar 2017 19:24:43 +0530
> > Vignesh R <vigneshr@xxxxxx> wrote:
> >
> >>>>>>
> >>>>> Not really, I am debugging another issue with UBIFS on DRA74 EVM (ARM
> >>>>> cortex-a15) wherein pages allocated by vmalloc are in highmem region
> >>>>> that are not addressable using 32 bit addresses and is backed by LPAE.
> >>>>> So, a 32 bit DMA cannot access these buffers at all.
> >>>>> When dma_map_sg() is called to map these pages by spi_map_buf() the
> >>>>> physical address is just truncated to 32 bit in pfn_to_dma() (as part of
> >>>>> dma_map_sg() call). This results in random crashes as DMA starts
> >>>>> accessing random memory during SPI read.
> >>>>>
> >>>>> IMO, there may be more undiscovered caveat with using dma_map_sg() for
> >>>>> non kmalloc'd buffers and its better that spi-nor starts handling these
> >>>>> buffers instead of relying on spi_map_msg() and working around every
> >>>>> time something pops up.
> >>>>>
> >>>> Ok, I had a closer look at the SPI framework, and it seems there's a
> >>>> way to tell to the core that a specific transfer cannot use DMA
> >>>> (->can_dam()). The first thing you should do is fix the spi-davinci
> >>>> driver:
> >>>>
> >>>> 1/ implement ->can_dma()
> >>>> 2/ patch davinci_spi_bufs() to take the decision to do DMA or not on a
> >>>> per-xfer basis and not on a per-device basis
> >>>>
> >> This would lead to poor perf defeating entire purpose of using DMA.
> > Hm, that's not really true. For all cases where you have a DMA-able
> > buffer it would still use DMA. For other cases (like the UBI+SPI-NOR
> > case we're talking about here), yes, it will be slower, but slower is
> > still better than buggy.
> > So, in any case, I think the fixes pointed by Frode are needed.
> Also, I think the UBIFS layer only uses vmalloc'ed buffers during
> mount/unmount and not for read/write, so the performance hit is not
> that big.

It's a bit more complicated than that. You may have operations running
in background that are using those big vmalloc-ed buffers at runtime.
To optimize things, we really need to split LEB/PEB buffers into
multiple ->max_write_size (or ->min_io_size) kmalloc-ed buffers.

> In most cases the buffer is the size of the erase block, but I've seen
> vmalloc'ed buffer of size only 11 bytes ! So, to optimize this, the
> best solution is probably to change how the UBIFS layer is using
> vmalloc'ed vs kmalloc'ed buffers, since vmalloc'ed should only be used
> for large (> 128K) buffers.

Hm, the buffer itself is bigger than 11 bytes, it's just that the
same buffer is used in different use cases, and sometime we're only
partially filling it.