[PATCH] usb: gadget: mv_udc: clarify a switch with an implicit fall-through

From: Michal Nazarewicz
Date: Wed Mar 01 2017 - 09:46:35 EST


Rearrange statements in mv_ep_enable function so that itâs obvious
what the switch does and how zlt, ios and mult variables are
initialised. Most notably, this gets rid of an implicit fall-through
so people donât have to wonder whether it was intenional or not.

Addresses-Coverity-ID: 201385
Reported-by: Gustavo A. R. Silva <garsilva@xxxxxxxxxxxxxx>
Signed-off-by: Michal Nazarewicz <mina86@xxxxxxxxxx>
---
drivers/usb/gadget/udc/mv_udc_core.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index 27ebb0d5449d..76f56c5762f9 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -445,7 +445,8 @@ static int mv_ep_enable(struct usb_ep *_ep,
struct mv_dqh *dqh;
u16 max = 0;
u32 bit_pos, epctrlx, direction;
- unsigned char zlt = 0, ios = 0, mult = 0;
+ const unsigned char zlt = 1;
+ unsigned char ios, mult;
unsigned long flags;

ep = container_of(_ep, struct mv_ep, ep);
@@ -465,8 +466,6 @@ static int mv_ep_enable(struct usb_ep *_ep,
* disable HW zero length termination select
* driver handles zero length packet through req->req.zero
*/
- zlt = 1;
-
bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);

/* Check if the Endpoint is Primed */
@@ -481,16 +480,16 @@ static int mv_ep_enable(struct usb_ep *_ep,
(unsigned)bit_pos);
goto en_done;
}
+
/* Set the max packet length, interrupt on Setup and Mult fields */
+ ios = 0;
+ mult = 0;
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_BULK:
- zlt = 1;
- mult = 0;
+ case USB_ENDPOINT_XFER_INT:
break;
case USB_ENDPOINT_XFER_CONTROL:
ios = 1;
- case USB_ENDPOINT_XFER_INT:
- mult = 0;
break;
case USB_ENDPOINT_XFER_ISOC:
/* Calculate transactions needed for high bandwidth iso */
--
2.12.0.rc1.440.g5b76565f74-goog