Re: [PATCH 1/7] watchdog: s3c2410: Use dev_dbg instead of pr_info

From: Guenter Roeck
Date: Fri Feb 24 2017 - 16:58:38 EST


On 02/24/2017 01:07 PM, Krzysztof Kozlowski wrote:
Replace the 'debug' module parameter and pr_info() with proper device
dynamic debug calls because this is the preferred and flexible way of
enabling debugging printks.

Also remove some obvious debug printks.

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

---
drivers/watchdog/s3c2410_wdt.c | 29 ++++++-----------------------
1 file changed, 6 insertions(+), 23 deletions(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 7db7847a005c..f7aad19d20ff 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -23,8 +23,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/

-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
@@ -83,13 +81,11 @@ static bool nowayout = WATCHDOG_NOWAYOUT;
static int tmr_margin;
static int tmr_atboot = S3C2410_WATCHDOG_ATBOOT;
static int soft_noboot;
-static int debug;

module_param(tmr_margin, int, 0);
module_param(tmr_atboot, int, 0);
module_param(nowayout, bool, 0);
module_param(soft_noboot, int, 0);
-module_param(debug, int, 0);

MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
__MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")");
@@ -100,7 +96,6 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
"0 to reboot (default 0)");
-MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");

/**
* struct s3c2410_wdt_variant - Per-variant config data
@@ -204,14 +199,6 @@ static const struct platform_device_id s3c2410_wdt_ids[] = {
};
MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);

-/* watchdog control routines */
-
-#define DBG(fmt, ...) \
-do { \
- if (debug) \
- pr_info(fmt, ##__VA_ARGS__); \
-} while (0)
-
/* functions */

static inline unsigned int s3c2410wdt_max_timeout(struct clk *clock)
@@ -307,8 +294,8 @@ static int s3c2410wdt_start(struct watchdog_device *wdd)
wtcon |= S3C2410_WTCON_RSTEN;
}

- DBG("%s: count=0x%08x, wtcon=%08lx\n",
- __func__, wdt->count, wtcon);
+ dev_dbg(wdt->dev, "Starting watchdog: count=0x%08x, wtcon=%08lx\n",
+ wdt->count, wtcon);

writel(wdt->count, wdt->reg_base + S3C2410_WTDAT);
writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
@@ -337,8 +324,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou
freq = DIV_ROUND_UP(freq, 128);
count = timeout * freq;

- DBG("%s: count=%d, timeout=%d, freq=%lu\n",
- __func__, count, timeout, freq);
+ dev_dbg(wdt->dev, "Heartbeat: count=%d, timeout=%d, freq=%lu\n",
+ count, timeout, freq);

/* if the count is bigger than the watchdog register,
then work out what we need to do (and if) we can
@@ -354,8 +341,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou
}
}

- DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
- __func__, timeout, divisor, count, DIV_ROUND_UP(count, divisor));
+ dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%d (%08x)\n",
+ timeout, divisor, count, DIV_ROUND_UP(count, divisor));

count = DIV_ROUND_UP(count, divisor);
wdt->count = count;
@@ -544,8 +531,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
int started = 0;
int ret;

- DBG("%s: probe=%p\n", __func__, pdev);
-
dev = &pdev->dev;

wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
@@ -581,8 +566,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
goto err;
}

- DBG("probe: mapped reg_base=%p\n", wdt->reg_base);
-
wdt->clock = devm_clk_get(dev, "watchdog");
if (IS_ERR(wdt->clock)) {
dev_err(dev, "failed to find watchdog clock source\n");