[PATCH v2 2/3] usb: dwc3: use BIT() macro where possible

From: Roger Quadros
Date: Thu Feb 16 2017 - 06:09:26 EST


To avoid checkpatch warnings with new patches let's
start using the BIT() macro wherever possible.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
v2:
-include bitops.h

drivers/usb/dwc3/core.h | 193 ++++++++++++++++++++++---------------------
drivers/usb/dwc3/dwc3-omap.c | 48 +++++------
drivers/usb/dwc3/gadget.h | 20 ++---
3 files changed, 131 insertions(+), 130 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 14b7602..85f44e1 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -23,6 +23,7 @@
#include <linux/spinlock.h>
#include <linux/ioport.h>
#include <linux/list.h>
+#include <linux/bitops.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/debugfs.h>
@@ -65,7 +66,7 @@
#define DWC3_DEVICE_EVENT_OVERFLOW 11

#define DWC3_GEVNTCOUNT_MASK 0xfffc
-#define DWC3_GEVNTCOUNT_EHB (1 << 31)
+#define DWC3_GEVNTCOUNT_EHB BIT(31)
#define DWC3_GSNPSID_MASK 0xffff0000
#define DWC3_GSNPSREV_MASK 0xffff

@@ -175,11 +176,11 @@
/* Global RX Threshold Configuration Register */
#define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19)
#define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
-#define DWC3_GRXTHRCFG_PKTCNTSEL (1 << 29)
+#define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)

/* Global Configuration Register */
#define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19)
-#define DWC3_GCTL_U2RSTECN (1 << 16)
+#define DWC3_GCTL_U2RSTECN BIT(16)
#define DWC3_GCTL_RAMCLKSEL(x) (((x) & DWC3_GCTL_CLK_MASK) << 6)
#define DWC3_GCTL_CLK_BUS (0)
#define DWC3_GCTL_CLK_PIPE (1)
@@ -192,24 +193,24 @@
#define DWC3_GCTL_PRTCAP_DEVICE 2
#define DWC3_GCTL_PRTCAP_OTG 3

-#define DWC3_GCTL_CORESOFTRESET (1 << 11)
-#define DWC3_GCTL_SOFITPSYNC (1 << 10)
+#define DWC3_GCTL_CORESOFTRESET BIT(11)
+#define DWC3_GCTL_SOFITPSYNC BIT(10)
#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
-#define DWC3_GCTL_DISSCRAMBLE (1 << 3)
-#define DWC3_GCTL_U2EXIT_LFPS (1 << 2)
-#define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1)
-#define DWC3_GCTL_DSBLCLKGTNG (1 << 0)
+#define DWC3_GCTL_DISSCRAMBLE BIT(3)
+#define DWC3_GCTL_U2EXIT_LFPS BIT(2)
+#define DWC3_GCTL_GBLHIBERNATIONEN BIT(1)
+#define DWC3_GCTL_DSBLCLKGTNG BIT(0)

/* Global User Control 1 Register */
-#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW (1 << 24)
+#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)

/* Global USB2 PHY Configuration Register */
-#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
-#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30)
-#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
-#define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4)
-#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8)
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST BIT(31)
+#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS BIT(30)
+#define DWC3_GUSB2PHYCFG_SUSPHY BIT(6)
+#define DWC3_GUSB2PHYCFG_ULPI_UTMI BIT(4)
+#define DWC3_GUSB2PHYCFG_ENBLSLPM BIT(8)
#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3)
#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1)
#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10)
@@ -220,25 +221,25 @@
#define UTMI_PHYIF_8_BIT 0

/* Global USB2 PHY Vendor Control Register */
-#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25)
-#define DWC3_GUSB2PHYACC_BUSY (1 << 23)
-#define DWC3_GUSB2PHYACC_WRITE (1 << 22)
+#define DWC3_GUSB2PHYACC_NEWREGREQ BIT(25)
+#define DWC3_GUSB2PHYACC_BUSY BIT(23)
+#define DWC3_GUSB2PHYACC_WRITE BIT(22)
#define DWC3_GUSB2PHYACC_ADDR(n) (n << 16)
#define DWC3_GUSB2PHYACC_EXTEND_ADDR(n) (n << 8)
#define DWC3_GUSB2PHYACC_DATA(n) (n & 0xff)

/* Global USB3 PIPE Control Register */
-#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
-#define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29)
-#define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28)
-#define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24)
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST BIT(31)
+#define DWC3_GUSB3PIPECTL_U2SSINP3OK BIT(29)
+#define DWC3_GUSB3PIPECTL_DISRXDETINP3 BIT(28)
+#define DWC3_GUSB3PIPECTL_REQP1P2P3 BIT(24)
#define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19)
#define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7)
#define DWC3_GUSB3PIPECTL_DEP1P2P3_EN DWC3_GUSB3PIPECTL_DEP1P2P3(1)
-#define DWC3_GUSB3PIPECTL_DEPOCHANGE (1 << 18)
-#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
-#define DWC3_GUSB3PIPECTL_LFPSFILT (1 << 9)
-#define DWC3_GUSB3PIPECTL_RX_DETOPOLL (1 << 8)
+#define DWC3_GUSB3PIPECTL_DEPOCHANGE BIT(18)
+#define DWC3_GUSB3PIPECTL_SUSPHY BIT(17)
+#define DWC3_GUSB3PIPECTL_LFPSFILT BIT(9)
+#define DWC3_GUSB3PIPECTL_RX_DETOPOLL BIT(8)
#define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK DWC3_GUSB3PIPECTL_TX_DEEPH(3)
#define DWC3_GUSB3PIPECTL_TX_DEEPH(n) ((n) << 1)

@@ -247,7 +248,7 @@
#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)

/* Global Event Size Registers */
-#define DWC3_GEVNTSIZ_INTMASK (1 << 31)
+#define DWC3_GEVNTSIZ_INTMASK BIT(31)
#define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff)

/* Global HWPARAMS0 Register */
@@ -288,18 +289,18 @@
#define DWC3_MAX_HIBER_SCRATCHBUFS 15

/* Global HWPARAMS6 Register */
-#define DWC3_GHWPARAMS6_EN_FPGA (1 << 7)
+#define DWC3_GHWPARAMS6_EN_FPGA BIT(7)

/* Global HWPARAMS7 Register */
#define DWC3_GHWPARAMS7_RAM1_DEPTH(n) ((n) & 0xffff)
#define DWC3_GHWPARAMS7_RAM2_DEPTH(n) (((n) >> 16) & 0xffff)

/* Global Frame Length Adjustment Register */
-#define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7)
+#define DWC3_GFLADJ_30MHZ_SDBND_SEL BIT(7)
#define DWC3_GFLADJ_30MHZ_MASK 0x3f

/* Global User Control Register 2 */
-#define DWC3_GUCTL2_RST_ACTBITLATER (1 << 14)
+#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)

/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
@@ -309,23 +310,23 @@
#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DCFG_SUPERSPEED (4 << 0)
#define DWC3_DCFG_HIGHSPEED (0 << 0)
-#define DWC3_DCFG_FULLSPEED (1 << 0)
+#define DWC3_DCFG_FULLSPEED BIT(0)
#define DWC3_DCFG_LOWSPEED (2 << 0)

#define DWC3_DCFG_NUMP_SHIFT 17
#define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
#define DWC3_DCFG_NUMP_MASK (0x1f << DWC3_DCFG_NUMP_SHIFT)
-#define DWC3_DCFG_LPM_CAP (1 << 22)
+#define DWC3_DCFG_LPM_CAP BIT(22)

/* Device Control Register */
-#define DWC3_DCTL_RUN_STOP (1 << 31)
-#define DWC3_DCTL_CSFTRST (1 << 30)
-#define DWC3_DCTL_LSFTRST (1 << 29)
+#define DWC3_DCTL_RUN_STOP BIT(31)
+#define DWC3_DCTL_CSFTRST BIT(30)
+#define DWC3_DCTL_LSFTRST BIT(29)

#define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24)
#define DWC3_DCTL_HIRD_THRES(n) ((n) << 24)

-#define DWC3_DCTL_APPL1RES (1 << 23)
+#define DWC3_DCTL_APPL1RES BIT(23)

/* These apply for core versions 1.87a and earlier */
#define DWC3_DCTL_TRGTULST_MASK (0x0f << 17)
@@ -340,15 +341,15 @@
#define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf)
#define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20)

-#define DWC3_DCTL_KEEP_CONNECT (1 << 19)
-#define DWC3_DCTL_L1_HIBER_EN (1 << 18)
-#define DWC3_DCTL_CRS (1 << 17)
-#define DWC3_DCTL_CSS (1 << 16)
+#define DWC3_DCTL_KEEP_CONNECT BIT(19)
+#define DWC3_DCTL_L1_HIBER_EN BIT(18)
+#define DWC3_DCTL_CRS BIT(17)
+#define DWC3_DCTL_CSS BIT(16)

-#define DWC3_DCTL_INITU2ENA (1 << 12)
-#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
-#define DWC3_DCTL_INITU1ENA (1 << 10)
-#define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
+#define DWC3_DCTL_INITU2ENA BIT(12)
+#define DWC3_DCTL_ACCEPTU2ENA BIT(11)
+#define DWC3_DCTL_INITU1ENA BIT(10)
+#define DWC3_DCTL_ACCEPTU1ENA BIT(9)
#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)

#define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5)
@@ -363,36 +364,36 @@
#define DWC3_DCTL_ULSTCHNG_LOOPBACK (DWC3_DCTL_ULSTCHNGREQ(11))

/* Device Event Enable Register */
-#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN (1 << 12)
-#define DWC3_DEVTEN_EVNTOVERFLOWEN (1 << 11)
-#define DWC3_DEVTEN_CMDCMPLTEN (1 << 10)
-#define DWC3_DEVTEN_ERRTICERREN (1 << 9)
-#define DWC3_DEVTEN_SOFEN (1 << 7)
-#define DWC3_DEVTEN_EOPFEN (1 << 6)
-#define DWC3_DEVTEN_HIBERNATIONREQEVTEN (1 << 5)
-#define DWC3_DEVTEN_WKUPEVTEN (1 << 4)
-#define DWC3_DEVTEN_ULSTCNGEN (1 << 3)
-#define DWC3_DEVTEN_CONNECTDONEEN (1 << 2)
-#define DWC3_DEVTEN_USBRSTEN (1 << 1)
-#define DWC3_DEVTEN_DISCONNEVTEN (1 << 0)
+#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN BIT(12)
+#define DWC3_DEVTEN_EVNTOVERFLOWEN BIT(11)
+#define DWC3_DEVTEN_CMDCMPLTEN BIT(10)
+#define DWC3_DEVTEN_ERRTICERREN BIT(9)
+#define DWC3_DEVTEN_SOFEN BIT(7)
+#define DWC3_DEVTEN_EOPFEN BIT(6)
+#define DWC3_DEVTEN_HIBERNATIONREQEVTEN BIT(5)
+#define DWC3_DEVTEN_WKUPEVTEN BIT(4)
+#define DWC3_DEVTEN_ULSTCNGEN BIT(3)
+#define DWC3_DEVTEN_CONNECTDONEEN BIT(2)
+#define DWC3_DEVTEN_USBRSTEN BIT(1)
+#define DWC3_DEVTEN_DISCONNEVTEN BIT(0)

/* Device Status Register */
-#define DWC3_DSTS_DCNRD (1 << 29)
+#define DWC3_DSTS_DCNRD BIT(29)

/* This applies for core versions 1.87a and earlier */
-#define DWC3_DSTS_PWRUPREQ (1 << 24)
+#define DWC3_DSTS_PWRUPREQ BIT(24)

/* These apply for core versions 1.94a and later */
-#define DWC3_DSTS_RSS (1 << 25)
-#define DWC3_DSTS_SSS (1 << 24)
+#define DWC3_DSTS_RSS BIT(25)
+#define DWC3_DSTS_SSS BIT(24)

-#define DWC3_DSTS_COREIDLE (1 << 23)
-#define DWC3_DSTS_DEVCTRLHLT (1 << 22)
+#define DWC3_DSTS_COREIDLE BIT(23)
+#define DWC3_DSTS_DEVCTRLHLT BIT(22)

#define DWC3_DSTS_USBLNKST_MASK (0x0f << 18)
#define DWC3_DSTS_USBLNKST(n) (((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)

-#define DWC3_DSTS_RXFIFOEMPTY (1 << 17)
+#define DWC3_DSTS_RXFIFOEMPTY BIT(17)

#define DWC3_DSTS_SOFFN_MASK (0x3fff << 3)
#define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
@@ -402,7 +403,7 @@
#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DSTS_SUPERSPEED (4 << 0)
#define DWC3_DSTS_HIGHSPEED (0 << 0)
-#define DWC3_DSTS_FULLSPEED (1 << 0)
+#define DWC3_DSTS_FULLSPEED BIT(0)
#define DWC3_DSTS_LOWSPEED (2 << 0)

/* Device Generic Command Register */
@@ -420,26 +421,26 @@
#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10

#define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F)
-#define DWC3_DGCMD_CMDACT (1 << 10)
-#define DWC3_DGCMD_CMDIOC (1 << 8)
+#define DWC3_DGCMD_CMDACT BIT(10)
+#define DWC3_DGCMD_CMDIOC BIT(8)

/* Device Generic Command Parameter Register */
-#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT (1 << 0)
+#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT BIT(0)
#define DWC3_DGCMDPAR_FIFO_NUM(n) ((n) << 0)
#define DWC3_DGCMDPAR_RX_FIFO (0 << 5)
-#define DWC3_DGCMDPAR_TX_FIFO (1 << 5)
+#define DWC3_DGCMDPAR_TX_FIFO BIT(5)
#define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0)
-#define DWC3_DGCMDPAR_LOOPBACK_ENA (1 << 0)
+#define DWC3_DGCMDPAR_LOOPBACK_ENA BIT(0)

/* Device Endpoint Command Register */
#define DWC3_DEPCMD_PARAM_SHIFT 16
#define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT)
#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
#define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F)
-#define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11)
-#define DWC3_DEPCMD_CLEARPENDIN (1 << 11)
-#define DWC3_DEPCMD_CMDACT (1 << 10)
-#define DWC3_DEPCMD_CMDIOC (1 << 8)
+#define DWC3_DEPCMD_HIPRI_FORCERM BIT(11)
+#define DWC3_DEPCMD_CLEARPENDIN BIT(11)
+#define DWC3_DEPCMD_CMDACT BIT(10)
+#define DWC3_DEPCMD_CMDIOC BIT(8)

#define DWC3_DEPCMD_DEPSTARTCFG (0x09 << 0)
#define DWC3_DEPCMD_ENDTRANSFER (0x08 << 0)
@@ -457,7 +458,7 @@
#define DWC3_DEPCMD_CMD(x) ((x) & 0xf)

/* The EP number goes 0..31 so ep0 is always out and ep1 is always in */
-#define DWC3_DALEPENA_EP(n) (1 << n)
+#define DWC3_DALEPENA_EP(n) BIT(n)

#define DWC3_DEPCMD_TYPE_CONTROL 0
#define DWC3_DEPCMD_TYPE_ISOC 1
@@ -499,8 +500,8 @@ struct dwc3_event_buffer {
struct dwc3 *dwc;
};

-#define DWC3_EP_FLAG_STALLED (1 << 0)
-#define DWC3_EP_FLAG_WEDGED (1 << 1)
+#define DWC3_EP_FLAG_STALLED BIT(0)
+#define DWC3_EP_FLAG_WEDGED BIT(1)

#define DWC3_EP_DIRECTION_TX true
#define DWC3_EP_DIRECTION_RX false
@@ -549,17 +550,17 @@ struct dwc3_ep {

u32 saved_state;
unsigned flags;
-#define DWC3_EP_ENABLED (1 << 0)
-#define DWC3_EP_STALL (1 << 1)
-#define DWC3_EP_WEDGE (1 << 2)
-#define DWC3_EP_BUSY (1 << 4)
-#define DWC3_EP_PENDING_REQUEST (1 << 5)
-#define DWC3_EP_MISSED_ISOC (1 << 6)
-#define DWC3_EP_END_TRANSFER_PENDING (1 << 7)
-#define DWC3_EP_TRANSFER_STARTED (1 << 8)
+#define DWC3_EP_ENABLED BIT(0)
+#define DWC3_EP_STALL BIT(1)
+#define DWC3_EP_WEDGE BIT(2)
+#define DWC3_EP_BUSY BIT(4)
+#define DWC3_EP_PENDING_REQUEST BIT(5)
+#define DWC3_EP_MISSED_ISOC BIT(6)
+#define DWC3_EP_END_TRANSFER_PENDING BIT(7)
+#define DWC3_EP_TRANSFER_STARTED BIT(8)

/* This last one is specific to EP0 */
-#define DWC3_EP0_DIR_IN (1 << 31)
+#define DWC3_EP0_DIR_IN BIT(31)

/*
* IMPORTANT: we *know* we have 256 TRBs in our @trb_pool, so we will
@@ -637,13 +638,13 @@ enum dwc3_link_state {
#define DWC3_TRB_STS_XFER_IN_PROG 4

/* TRB Control */
-#define DWC3_TRB_CTRL_HWO (1 << 0)
-#define DWC3_TRB_CTRL_LST (1 << 1)
-#define DWC3_TRB_CTRL_CHN (1 << 2)
-#define DWC3_TRB_CTRL_CSP (1 << 3)
+#define DWC3_TRB_CTRL_HWO BIT(0)
+#define DWC3_TRB_CTRL_LST BIT(1)
+#define DWC3_TRB_CTRL_CHN BIT(2)
+#define DWC3_TRB_CTRL_CSP BIT(3)
#define DWC3_TRB_CTRL_TRBCTL(n) (((n) & 0x3f) << 4)
-#define DWC3_TRB_CTRL_ISP_IMI (1 << 10)
-#define DWC3_TRB_CTRL_IOC (1 << 11)
+#define DWC3_TRB_CTRL_ISP_IMI BIT(10)
+#define DWC3_TRB_CTRL_IOC BIT(11)
#define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14)

#define DWC3_TRBCTL_TYPE(n) ((n) & (0x3f << 4))
@@ -1049,13 +1050,13 @@ struct dwc3_event_depevt {
u32 status:4;

/* Within XferNotReady */
-#define DEPEVT_STATUS_TRANSFER_ACTIVE (1 << 3)
+#define DEPEVT_STATUS_TRANSFER_ACTIVE BIT(3)

/* Within XferComplete */
-#define DEPEVT_STATUS_BUSERR (1 << 0)
-#define DEPEVT_STATUS_SHORT (1 << 1)
-#define DEPEVT_STATUS_IOC (1 << 2)
-#define DEPEVT_STATUS_LST (1 << 3)
+#define DEPEVT_STATUS_BUSERR BIT(0)
+#define DEPEVT_STATUS_SHORT BIT(1)
+#define DEPEVT_STATUS_IOC BIT(2)
+#define DEPEVT_STATUS_LST BIT(3)

/* Stream event only */
#define DEPEVT_STREAMEVT_FOUND 1
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 35b6351..fe4efb8 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -79,40 +79,40 @@
#define USBOTGSS_DEBUG_OFFSET 0x0600

/* SYSCONFIG REGISTER */
-#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16)
+#define USBOTGSS_SYSCONFIG_DMADISABLE BIT(16)

/* IRQ_EOI REGISTER */
-#define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0)
+#define USBOTGSS_IRQ_EOI_LINE_NUMBER BIT(0)

/* IRQS0 BITS */
-#define USBOTGSS_IRQO_COREIRQ_ST (1 << 0)
+#define USBOTGSS_IRQO_COREIRQ_ST BIT(0)

/* IRQMISC BITS */
-#define USBOTGSS_IRQMISC_DMADISABLECLR (1 << 17)
-#define USBOTGSS_IRQMISC_OEVT (1 << 16)
-#define USBOTGSS_IRQMISC_DRVVBUS_RISE (1 << 13)
-#define USBOTGSS_IRQMISC_CHRGVBUS_RISE (1 << 12)
-#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE (1 << 11)
-#define USBOTGSS_IRQMISC_IDPULLUP_RISE (1 << 8)
-#define USBOTGSS_IRQMISC_DRVVBUS_FALL (1 << 5)
-#define USBOTGSS_IRQMISC_CHRGVBUS_FALL (1 << 4)
-#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL (1 << 3)
-#define USBOTGSS_IRQMISC_IDPULLUP_FALL (1 << 0)
+#define USBOTGSS_IRQMISC_DMADISABLECLR BIT(17)
+#define USBOTGSS_IRQMISC_OEVT BIT(16)
+#define USBOTGSS_IRQMISC_DRVVBUS_RISE BIT(13)
+#define USBOTGSS_IRQMISC_CHRGVBUS_RISE BIT(12)
+#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE BIT(11)
+#define USBOTGSS_IRQMISC_IDPULLUP_RISE BIT(8)
+#define USBOTGSS_IRQMISC_DRVVBUS_FALL BIT(5)
+#define USBOTGSS_IRQMISC_CHRGVBUS_FALL BIT(4)
+#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL BIT(3)
+#define USBOTGSS_IRQMISC_IDPULLUP_FALL BIT(0)

/* UTMI_OTG_STATUS REGISTER */
-#define USBOTGSS_UTMI_OTG_STATUS_DRVVBUS (1 << 5)
-#define USBOTGSS_UTMI_OTG_STATUS_CHRGVBUS (1 << 4)
-#define USBOTGSS_UTMI_OTG_STATUS_DISCHRGVBUS (1 << 3)
-#define USBOTGSS_UTMI_OTG_STATUS_IDPULLUP (1 << 0)
+#define USBOTGSS_UTMI_OTG_STATUS_DRVVBUS BIT(5)
+#define USBOTGSS_UTMI_OTG_STATUS_CHRGVBUS BIT(4)
+#define USBOTGSS_UTMI_OTG_STATUS_DISCHRGVBUS BIT(3)
+#define USBOTGSS_UTMI_OTG_STATUS_IDPULLUP BIT(0)

/* UTMI_OTG_CTRL REGISTER */
-#define USBOTGSS_UTMI_OTG_CTRL_SW_MODE (1 << 31)
-#define USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT (1 << 9)
-#define USBOTGSS_UTMI_OTG_CTRL_TXBITSTUFFENABLE (1 << 8)
-#define USBOTGSS_UTMI_OTG_CTRL_IDDIG (1 << 4)
-#define USBOTGSS_UTMI_OTG_CTRL_SESSEND (1 << 3)
-#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID (1 << 2)
-#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID (1 << 1)
+#define USBOTGSS_UTMI_OTG_CTRL_SW_MODE BIT(31)
+#define USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT BIT(9)
+#define USBOTGSS_UTMI_OTG_CTRL_TXBITSTUFFENABLE BIT(8)
+#define USBOTGSS_UTMI_OTG_CTRL_IDDIG BIT(4)
+#define USBOTGSS_UTMI_OTG_CTRL_SESSEND BIT(3)
+#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID BIT(2)
+#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID BIT(1)

struct dwc3_omap {
struct device *dev;
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 3129bcf..97f53de 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -29,16 +29,16 @@ struct dwc3;

/* DEPCFG parameter 1 */
#define DWC3_DEPCFG_INT_NUM(n) ((n) << 0)
-#define DWC3_DEPCFG_XFER_COMPLETE_EN (1 << 8)
-#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN (1 << 9)
-#define DWC3_DEPCFG_XFER_NOT_READY_EN (1 << 10)
-#define DWC3_DEPCFG_FIFO_ERROR_EN (1 << 11)
-#define DWC3_DEPCFG_STREAM_EVENT_EN (1 << 13)
+#define DWC3_DEPCFG_XFER_COMPLETE_EN BIT(8)
+#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN BIT(9)
+#define DWC3_DEPCFG_XFER_NOT_READY_EN BIT(10)
+#define DWC3_DEPCFG_FIFO_ERROR_EN BIT(11)
+#define DWC3_DEPCFG_STREAM_EVENT_EN BIT(13)
#define DWC3_DEPCFG_BINTERVAL_M1(n) ((n) << 16)
-#define DWC3_DEPCFG_STREAM_CAPABLE (1 << 24)
+#define DWC3_DEPCFG_STREAM_CAPABLE BIT(24)
#define DWC3_DEPCFG_EP_NUMBER(n) ((n) << 25)
-#define DWC3_DEPCFG_BULK_BASED (1 << 30)
-#define DWC3_DEPCFG_FIFO_BASED (1 << 31)
+#define DWC3_DEPCFG_BULK_BASED BIT(30)
+#define DWC3_DEPCFG_FIFO_BASED BIT(31)

/* DEPCFG parameter 0 */
#define DWC3_DEPCFG_EP_TYPE(n) ((n) << 1)
@@ -47,10 +47,10 @@ struct dwc3;
#define DWC3_DEPCFG_BURST_SIZE(n) ((n) << 22)
#define DWC3_DEPCFG_DATA_SEQ_NUM(n) ((n) << 26)
/* This applies for core versions earlier than 1.94a */
-#define DWC3_DEPCFG_IGN_SEQ_NUM (1 << 31)
+#define DWC3_DEPCFG_IGN_SEQ_NUM BIT(31)
/* These apply for core versions 1.94a and later */
#define DWC3_DEPCFG_ACTION_INIT (0 << 30)
-#define DWC3_DEPCFG_ACTION_RESTORE (1 << 30)
+#define DWC3_DEPCFG_ACTION_RESTORE BIT(30)
#define DWC3_DEPCFG_ACTION_MODIFY (2 << 30)

/* DEPXFERCFG parameter 0 */
--
2.7.4